[bluewater328]

So, I have found a set of sports seats in great condition, but believe it comes from a 2007.

Current:
2011 LCI non-sports seats, fully adjustable, lumbar, memory

Going to:
2007 Sport seats, fully adjustable, NO lumbar, side bolster, memory

- I have no issue with cannibalizing's one set of seats for another's glory.

Read a few threads, and 0I'm assuming I have the following concerns:

- Understand its best to just swap the seat belt buckles over. No problem.

- Active headrest in the non-sport seat. Can I just transplant it from my current LCI one somehow? Or is my only option to code it out and not have the AHR option?

- If I want lumbar, can I retro the lumbar back into the 2007 seat? I read I would need to share the pin connection for the side bolsters - true? how?

- Is there a scenario where I do the opposite and use the controller of the LCI one in the sport one?

- Any other thoughts or things I haven't though of? Also any recommended threads as there was a significantly long one focused on heated seats (which I dont need/have/want)

[neilvan]

Lumbar is retrofitable not sure if all are the same or if its non-sport/sport versions(id check real oem on part numbers).

IIRC Active headrest isnt something you can swap over.

Assuming both seats are manual/power+mem or non-heated/heated?

[bluewater328]

Originally Posted by neilvan

Lumbar is retrofitable not sure if all are the same or if its non-sport/sport versions(id check real oem on part numbers).

IIRC Active headrest isnt something you can swap over.

Assuming both seats are manual/power+mem or non-heated/heated?

Both are full power adjustable with memory; non-heated.

So the headrest couldn't just swap over with the wiring? Shucks, really is just either or then.