Android App BMWHAT

rogerdiaz · 06-29-2014, 04:03 PM

Can the app reset transmission adaptations?

I35it · 07-01-2014, 09:31 AM

Not sure but I will check in about 10 mins.

MingKun · 07-02-2014, 06:41 AM

Keep us posted, I am very interested and about to bite the bullet.

So is the best cable to buy the OBD Adapter K-Line with USB?

naynay · 07-06-2014, 08:22 PM

im using the dcan cable with this

ferocity02 · 07-07-2014, 11:58 PM

So is this is good app for coding? I want to get into coding but the programs like winkfp and ncsexpect seem difficult to use.

How does this app compare to those?

I tried using the lite version on my 04/2007 335i with an ELM327 bluetooth adapter and it says it cannot code via bluetooth. Anyone had this issue? Is it possible that my 04/2007 has the pre-03/2007 limitations?

I35it · 07-08-2014, 10:04 AM

Quote:

Originally Posted by ferocity02

So is this is good app for coding? I want to get into coding but the programs like winkfp and ncsexpect seem difficult to use.

How does this app compare to those?

I tried using the lite version on my 04/2007 335i with an ELM327 bluetooth adapter and it says it cannot code via bluetooth. Anyone had this issue? Is it possible that my 04/2007 has the pre-03/2007 limitations?

Sounds like you probably need the cable. Its cheap on Amazon.

Is there anyone that coded the rear view mirros to both dip when going into reverse?

ferocity02 · 07-08-2014, 11:15 AM

So how does this app compare to the other coding programs out there? The app certainly seems easy to use, but is this at a loss of capability? Limited coding options?

techwhiz · 07-09-2014, 08:40 PM

Quote:

Originally Posted by ferocity02

So how does this app compare to the other coding programs out there? The app certainly seems easy to use, but is this at a loss of capability? Limited coding options?

Yes.
You can only code what is in the app.
It's limited but has quite a bit.

EnjoyDriving · 11-13-2014, 12:36 PM

Hi, i just got the BMWhat BT dongle and installed their Free Lite app. I am able to connect to the dongle and detect 5 or 6 (sometimes 5 and sometimes 6??) ECUs, but it failed to communicate to any of the ECU with "communication : Insufficient" thou.

Please help and chime in.

M.a.r.k.u.s · 11-13-2014, 12:42 PM

Quote:

Originally Posted by ferocity02

So how does this app compare to the other coding programs out there? The app certainly seems easy to use, but is this at a loss of capability? Limited coding options?

In my opinion, the only module that is really missing (at least one that i care about coding) is CCC/CIC. I did talk to the developers of the app a couple of months ago and was told that it was in the works. So pretty soon, this app should handle most of the coding needs that the average person cares about.

rogerdiaz · 02-24-2015, 05:58 PM

would this app/adapter let me check if a module is working. I want to test comfort access module to see if its alive.

WilliamS · 02-24-2015, 06:21 PM

Quote:

Originally Posted by fredcase

Does anybody know if there is a cable to go directly from android to obd? I have a obd blue tooth but it limits what you can do with it.

No all you need if your phone is capable is a $4 OTG cable for android. Works like a charm on the older cars, uses same coding cable that i use for Alpina flash and such.

rogerdiaz · 03-01-2015, 11:43 AM

Elm327 v1.5 ebay working great for diagnostics and some some coding. Parameters dont work. Unsure if the "official" bmwwhat adapter allows for more ECUs to be tested. app found 42 ecus. 2011 335d

rogerdiaz · 03-01-2015, 11:46 AM

Quote:

Originally Posted by EnjoyDriving

Hi, i just got the BMWhat BT dongle and installed their Free Lite app. I am able to connect to the dongle and detect 5 or 6 (sometimes 5 and sometimes 6??) ECUs, but it failed to communicate to any of the ECU with "communication : Insufficient" thou.

Please help and chime in.

Did you ever get this fixed? Defective bmwwhat adapter?

pinoye90 · 03-01-2015, 03:29 PM

First I purchased the Bmwhat for iPhone wifiobd2 dongle paired with iPhone. This did not work for coding.
iPhone Bmwhat app 47$
Bmwhat obd2wifidongle 65$

Second I purchased Bmwhat cord paired with my samsung alpha the coding worked perfectly!!!
Bmwhat android app 59$, why more???
Bmwhat cord+usb to micro usb 40$

Vish8895 · 04-13-2015, 03:52 AM

Quote:

Originally Posted by pinoye90

First I purchased the Bmwhat for iPhone wifiobd2 dongle paired with iPhone. This did not work for coding.
iPhone Bmwhat app 47$
Bmwhat obd2wifidongle 65$

Second I purchased Bmwhat cord paired with my samsung alpha the coding worked perfectly!!!
Bmwhat android app 59$, why more???
Bmwhat cord+usb to micro usb 40$

I had similar issues, today i went out to my car armed with an ELM 327 BT reader and my LG G3 Android running BMWhat full.

I was able to read and clear codes but not perform any coding, it said i needed USB (even though my build date was 07/2007). Did it say this to you?

Thanks
Vish

pinoye90 · 04-13-2015, 11:08 AM

Quote:

Originally Posted by Vish8895

Quote:

Originally Posted by pinoye90

First I purchased the Bmwhat for iPhone wifiobd2 dongle paired with iPhone. This did not work for coding.
iPhone Bmwhat app 47$
Bmwhat obd2wifidongle 65$

Second I purchased Bmwhat cord paired with my samsung alpha the coding worked perfectly!!!
Bmwhat android app 59$, why more???
Bmwhat cord+usb to micro usb 40$

I had similar issues, today i went out to my car armed with an ELM 327 BT reader and my LG G3 Android running BMWhat full.

I was able to read and clear codes but not perform any coding, it said i needed USB (even though my build date was 07/2007). Did it say this to you?

Thanks
Vish

They just released a new usb wifi/Bluetooth and supposedly it works now.
I would recommend waiting until someone try's it or just buy the usb and adaptor since that for sure works for coding and cheaper... Goodluck

Vish8895 · 04-14-2015, 03:57 AM

Quote:

Originally Posted by pinoye90

They just released a new usb wifi/Bluetooth and supposedly it works now.
I would recommend waiting until someone try's it or just buy the usb and adaptor since that for sure works for coding and cheaper... Goodluck

I am in contact with someone from Ivini via email. My adapter works for sure as it worked on my friend E90.

I reckon my car just needs their USB lead, even though it's post 03/2007.

AndyW · 04-18-2015, 02:08 AM

Quote:

Originally Posted by Vish8895

I am in contact with someone from Ivini via email. My adapter works for sure as it worked on my friend E90.

I reckon my car just needs their USB lead, even though it's post 03/2007.

This is my concern right now also and it is keeping me from buying the BT adapter...my build date is 11/2007 but it is not an "LCI"...LCI didn't happen until 2009 in the US, I think.

I do have the INPA cable I just bought from one-stop electronics to do the Alpina B3 mod so I will see if the BMWhat light version can use that to see the ECU tomorrow. Just gotta go get an OTG adapter from Verizon or something.

cdgatti · 04-18-2015, 06:17 AM

My car is a 1/08 build and the ivini BT adapter works great for reading and clearing faults, coding, and I also reset my new battery. I had to choose 'alternate connection' in the settings menu to get normal/reasonable connection speed however. I saw this tip in one of the youtube videos.

Vish8895 · 04-19-2015, 04:52 PM

Quote:

Originally Posted by cdgatti

My car is a 1/08 build and the ivini BT adapter works great for reading and clearing faults, coding, and I also reset my new battery. I had to choose 'alternate connection' in the settings menu to get normal/reasonable connection speed however. I saw this tip in one of the youtube videos.

Ah that's interesting. Although I'm pretty sure mine is the older ECU type, I might try that this week.

Quasimodem · 04-21-2015, 04:37 PM

I have been using BMWhat for a while and it is great if you dont already code. The monitoring is good too, but there are other apps that also do that. Not sure if there are other apps that monitor all the diesel scr sensors though.

That being said, I effed up my system by removing an SCR pump without first removing the battery ground, so this little biatch is throwing new codes now that I can clear with BMWhat but they always come back.

Just ordered a powersupply because I have to start coding now to see if I can access the fault codes which BMWhat cant.

06-29-2014, 04:03 PM	#23
rogerdiaz Captain 28 Rep 743 Posts Drives: 2015 335i Join Date: Sep 2010 Location: Raleigh, NC iTrader: (2)	Can the app reset transmission adaptations?
	Appreciate 0 Quote

07-01-2014, 09:31 AM	#24
I35it all day 48 Rep 1,181 Posts Drives: 2012 135i Join Date: Jul 2012 Location: Temple, TX iTrader: (10) Garage List 2004 Toyota Tacoma [0.00] 2009 VW GTI [0.00] 2012 135i [10.00]	Not sure but I will check in about 10 mins.
	Appreciate 0 Quote

07-02-2014, 06:41 AM	#25
MingKun Private First Class 10 Rep 113 Posts Drives: Mitsubishi Evo Join Date: Jun 2014 Location: Australia iTrader: (0)	Keep us posted, I am very interested and about to bite the bullet. So is the best cable to buy the OBD Adapter K-Line with USB?
	Appreciate 0 Quote

07-06-2014, 08:22 PM	#26
naynay Banned 178 Rep 1,426 Posts Drives: 2006 E92 335i FBO Join Date: May 2013 Location: Melbourne Australia iTrader: (0)	im using the dcan cable with this
	Appreciate 0 Quote

07-07-2014, 11:58 PM	#27
ferocity02 Colonel 532 Rep 2,084 Posts Drives: 2013 135is Join Date: May 2014 Location: USA iTrader: (8)	So is this is good app for coding? I want to get into coding but the programs like winkfp and ncsexpect seem difficult to use. How does this app compare to those? I tried using the lite version on my 04/2007 335i with an ELM327 bluetooth adapter and it says it cannot code via bluetooth. Anyone had this issue? Is it possible that my 04/2007 has the pre-03/2007 limitations? Last edited by ferocity02; 07-08-2014 at 12:06 AM..
	Appreciate 0 Quote

07-08-2014, 11:15 AM	#29
ferocity02 Colonel 532 Rep 2,084 Posts Drives: 2013 135is Join Date: May 2014 Location: USA iTrader: (8)	So how does this app compare to the other coding programs out there? The app certainly seems easy to use, but is this at a loss of capability? Limited coding options?
	Appreciate 0 Quote

11-13-2014, 12:36 PM	#31
EnjoyDriving Private 7 Rep 77 Posts Drives: 2011 335i xDrive Coupe Join Date: May 2014 Location: MN iTrader: (0)	Hi, i just got the BMWhat BT dongle and installed their Free Lite app. I am able to connect to the dongle and detect 5 or 6 (sometimes 5 and sometimes 6??) ECUs, but it failed to communicate to any of the ECU with "communication : Insufficient" thou. Please help and chime in.
	Appreciate 0 Quote

02-24-2015, 05:58 PM	#33
rogerdiaz Captain 28 Rep 743 Posts Drives: 2015 335i Join Date: Sep 2010 Location: Raleigh, NC iTrader: (2)	would this app/adapter let me check if a module is working. I want to test comfort access module to see if its alive.
	Appreciate 0 Quote

03-01-2015, 11:43 AM	#35
rogerdiaz Captain 28 Rep 743 Posts Drives: 2015 335i Join Date: Sep 2010 Location: Raleigh, NC iTrader: (2)	Elm327 v1.5 ebay working great for diagnostics and some some coding. Parameters dont work. Unsure if the "official" bmwwhat adapter allows for more ECUs to be tested. app found 42 ecus. 2011 335d
	Appreciate 0 Quote

03-01-2015, 03:29 PM	#37
pinoye90 Banned 83 Rep 466 Posts Drives: 07-E90 Join Date: Dec 2011 Location: PHX iTrader: (0)	First I purchased the Bmwhat for iPhone wifiobd2 dongle paired with iPhone. This did not work for coding. iPhone Bmwhat app 47$ Bmwhat obd2wifidongle 65$ Second I purchased Bmwhat cord paired with my samsung alpha the coding worked perfectly!!! Bmwhat android app 59$, why more??? Bmwhat cord+usb to micro usb 40$
	Appreciate 0 Quote

04-18-2015, 06:17 AM	#42
cdgatti Colonel 255 Rep 2,547 Posts Drives: e90 328i Join Date: May 2011 Location: KY iTrader: (4)	My car is a 1/08 build and the ivini BT adapter works great for reading and clearing faults, coding, and I also reset my new battery. I had to choose 'alternate connection' in the settings menu to get normal/reasonable connection speed however. I saw this tip in one of the youtube videos. __________________ OEM Black grill and Blackline tails - LCI halogens with Lux V2 coded as DRL - 3M Crystalline - BMS PBX - OEM Euro Airbox with K&N - Hardwired CTEK - Bilstein B6 w/OEM springs and SP perches - Conti DWS06 - HiFi-Helix DSP - JLAudio HD/XD-Morel - CD changer trim - AE optical out
	Appreciate 2 Quote

04-21-2015, 04:37 PM	#44
Quasimodem Colonel 149 Rep 2,383 Posts Drives: 335d Join Date: Oct 2008 Location: California iTrader: (0) Garage List 2009 335d US [0.00]	I have been using BMWhat for a while and it is great if you dont already code. The monitoring is good too, but there are other apps that also do that. Not sure if there are other apps that monitor all the diesel scr sensors though. That being said, I effed up my system by removing an SCR pump without first removing the battery ground, so this little biatch is throwing new codes now that I can clear with BMWhat but they always come back. Just ordered a powersupply because I have to start coding now to see if I can access the fault codes which BMWhat cant. __________________ Speakers: CDT Audio HD-42 comps--front doors (RAAMmat deadened), CDT ES-06 6.5" woofers--kickpanl Pods, Hertz EBX202R dual 8" ported trunk sub. Amps: Phoenix Gold RSd 500.4 (comps & pods). PG RSd 600.1 (sub). Power & Ground: 4AWG Streetwires w/RockFosgt RFDB1 distro blocks. Input: HU lineout--Kicker KISL RCA adapters--RockFosgt RFIT-6 cables--Audiocontrol Matrix--Monster cables--RSd 500.4--lineout Monstr Cabl to RSd 600.1.
	Appreciate 0 Quote