[opjose]

This does not work with a scripted CIC.

You would need to restore the CIC to the original pre script activation then you could run the file to pull the 1b.

Otherwise you will have to use the same mechanism you used originally to script it again for the new map.

[Niska]

Originally Posted by opjose

This does not work with a scripted CIC.

You would need to restore the CIC to the original pre script activation then you could run the file to pull the 1b.

Otherwise you will have to use the same mechanism you used originally to script it again for the new map.

Thank you Opjose

What do you mean, what are the steps here to update the map?

[opjose]

Originally Posted by Niska

Thank you Opjose

What do you mean, what are the steps here to update the map?

How did you script the CIC in the first place?

Was the unit original to the car?

If not you will have to use a new script to deal with the map updates.

If you did it yourself you should know how.

If someone else did it you may have to contact them or someone else who can deal with script activations.

[Niska]

Problem solved! Map updated to latest version.

Reading from other forums different success stories I found excellent write up from FaxData about combox installation and the aswer was to use FSTool2 version 02.02.00 to CHECK FSC. My version was 02.02.1

Originally Posted by FaxData

Get FSTool2 version 02.02.00. Look for the installer file called setup_fstool2_02.02.00.exe. Please don't bother with any other version.

Thx FaxData!

[pacmac]

Hi;

Searched everywhere but can't seem to find a link to CIC HongKong / Macau Premium and SouthEast Asia Premium - does anybody have a link they can share with me ?

[l1ams]

Originally Posted by sagatas

I'm struggling to get 1b file. Some people mentioned bat file which needs to be on usb as well ? Also I used 2gb usb stick, people say that 1gb usb needs to be used ?

Thank you

Simular thing here I am struggling to get the 1b.hex file from my car, in order to generate the FSC code, can anyone help?

I have also tried to manually input my long vin number into the FSC Generator but all the codes which get generated do not work.

My vehicle is a 2013 F25 with the following navigation system:

Europe
BMW Group
101114014
Road Map Eurpoe MOVE 2013

I have got the Europe MOVE 2019 Map update file ready to go into my car but need the FSC code.
The last 7 digits of my VIN: 0C69515

Please, please, please can someone help as im pulling my hair out with it!

Thanks in advance

[torrque]

My car also does not dump the 1b.hex file... tried different sticks. I have on file on the root of the USB drive: copie_scr.sh

[bcoz]

Originally Posted by l1ams

I have got the Europe MOVE 2019 Map update file ready to go into my car but need the FSC code.

The script does not work with MOVE ... refer to previous comment: https://www.e90post.com/forums/showp...&postcount=461

[bcoz]

Originally Posted by torrque

My car also does not dump the 1b.hex file... tried different sticks. I have on file on the root of the USB drive: copie_scr.sh

What year was your car built? ...and what maps do you currently have installed? (use iDrive to find the map version and year)

[opjose]

Originally Posted by bcoz

What year was your car built? ...and what maps do you currently have installed? (use iDrive to find the map version and year)

His signature says 2008 & 2009 which is too early for the script mechanism.

[torrque]

Originally Posted by bcoz

What year was your car built? ...and what maps do you currently have installed? (use iDrive to find the map version and year)

good point, I have a 2009 E92 M3... current maps says 2009-1 North America premium , navigation version 1.28

[smass]

Originally Posted by torrque

good point, I have a 2009 E92 M3... current maps says 2009-1 North America premium , navigation version 1.28

2009 CIC are fine as long as they have had a firmware update. My updated 2009 CIC is identical to one I got from a 2013. Check to see if you have the check/tick shown in the lower left-hand corner of the pic below. If you have that, your CIC firmware is new enough to accept USB map updates. If not, you can only get the old DVD updates which are no longer being updated.

To get a firmware update you need the dealer to do a full car software update. 1 - 2 hours of labor depending on the dealer. Or DIY with a BMW ICOM fiber interface. Either option takes a few hours so this is not a simple process.

[opjose]

Yup he needs the update.

[majestic80]

Question! We'll this process work on a retrofit of a CIC?
I've gotten to as pulling the 1b.hex but trying to figure out how to generate a valid FSC code for nav. Everything has been coded correctly just missing Navigation and voice control. Thanks in advance.

[smass]

Originally Posted by majestic80

Question! We'll this process work on a retrofit of a CIC?
I've gotten to as pulling the 1b.hex but trying to figure out how to generate a valid FSC code for nav. Everything has been coded correctly just missing Navigation and voice control. Thanks in advance.

This will work to generate a FSC for a map update on a retrofitted CIC. If you need an FSC for nav activation this will not work. Google cic patcher.

[majestic80]

Originally Posted by smass

This will work to generate a FSC for a map update on a retrofitted CIC. If you need an FSC for nav activation this will not work. Google cic patcher.

Thank you!
I'll look into that...

[RobertR]

FSC code incorrect, please enter a correct code. Everything done correctly but it seems to not accept any generated code. Mine is a 2010 x23d. Current version I have on the car is Europe East Premium 2016-2 so it has been updated some time ago before I got it. Read the thread but don't seem to find any solution that works for me, if someone could help me.

[bcoz]

Originally Posted by RobertR

FSC code incorrect, please enter a correct code. Everything done correctly but it seems to not accept any generated code. Mine is a 2010 x23d. Current version I have on the car is Europe East Premium 2016-2 so it has been updated some time ago before I got it. Read the thread but don't seem to find any solution that works for me, if someone could help me.

Did your 1b.hex file contain a generic/incorrect VIN of 1234567 (characters 27 to 33)?
If so, you'll need to manually extract the 1b.hex file using an ENET to OBD2 Connector.

[martynz]

Since 2 days reading, reading, reading and testing and I am not able to generate the 1b file on my 2010 model CIC. I have tried 3 different versions of the copie_scr.sh file with 29kb, 394kb and 104kb. Not sure if there is even a difference. The expected files just does not get copied to the USB stick in the car.

I tried using DrGini but could not find a guide how to get the file out.
I tried the SWID reader and was able to create a fsc code files with a very long key. Not sure what to do with this. Maybe someone can point me into the right direction.

I have the small screen CIC but I am also not able to see which map version there is, as it comes up with asking for activation code straight away.

[opjose]

It sounds like your system is the older CIC due to the small screen. It may need a firmware update (search for that here and iLevel).

The head may have been transplanted from another car and navigation never properly enabled which may be why you are getting the FSV request at boot.

There are threads here about generating the FSC codes for transplanted head units here.

Also check this thread last post.

https://www.e90post.com/forums/showthread.php?t=1700430

[martynz]

opjose
Thanks for your reply in the other post.

My firmware is C1A which seems to be the latest. Also the 2014 maps on my CIC have now been activated and I can see the NAVI. But the 1B file still does not work.

Any newer firmware required or available?

[opjose]

Originally Posted by martynz

opjose
Thanks for your reply in the other post.

My firmware is C1A which seems to be the latest. Also the 2014 maps on my CIC have now been activated and I can see the NAVI. But the 1B file still does not work.

Any newer firmware required or available?

That is the correct version.

The 1b script doesn't always work.

Make sure you unpack the file into a relatively small by today's standard, USB drive that ideally has not been previously used and is formatted to fat32.

An 8GB drive or smaller should come pre-formatted to FAT32 and is ideal.

Insert it into the USB slot in your glove box, and leave it there.

Start the car and give it 5-10 minutes to be sure the CIC recognizes the drive and the script.

If it worked, you'll see a 1b.hex file on the root of the USB drive along with the script file.

EDIT: I saw on your other thread that you have CIC Motion. The script does not work with MOTION. It is for CIC Premium.