E90Post
 


Coby Wheel
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N55 Turbo Engine Tuning and Exhaust Modifications - 335i Tuning > Cobb stage 2 +, questions



Reply
 
Thread Tools Search this Thread
      06-14-2016, 11:12 PM   #1
Gunner_27
Private First Class
United_States
24
Rep
173
Posts

Drives: E53 X5 (4.8is)
Join Date: Jun 2015
Location: United States

iTrader: (0)

Cobb stage 2 +, questions

Hey guys, just about to install my fimic to hit stage 2 plus on cobb, there are very few reviews out there regarding this subject nothing that I would consider well reviewed.

Does anyone have this ?
How long have you had it for ?

Is stage 2+ a bit too aggressive ?

I have a full stock body and rime, but full bolt ons, coils and XI

Any input appreciated.

Cheers.
Appreciate 0
      06-14-2016, 11:14 PM   #2
CantCatchMe
Lieutenant Colonel
Romania
340
Rep
1,744
Posts

Drives: 2012 335i xdrive msport(E92)
Join Date: Aug 2014
Location: West Bloomfield, MI

iTrader: (2)

Yes people have used it. It's not that aggressive in terms of a protune. Do yourself a favor if you're going to be FBO, get a protune. One map for pump and the other with E85. You'll see the huge gains.
Appreciate 2
      06-14-2016, 11:18 PM   #3
Gunner_27
Private First Class
United_States
24
Rep
173
Posts

Drives: E53 X5 (4.8is)
Join Date: Jun 2015
Location: United States

iTrader: (0)

Quote:
Originally Posted by CantCatchMe View Post
Yes people have used it. It's not that aggressive in terms of a protune. Do yourself a favor if you're going to be FBO, get a protune. One map for pump and the other with E85. You'll see the huge gains.
Yes protune is my next step, I am just about install the fimic...

When I say too aggressive , I am putting it in regards to the stock oil cooler and sway bars and all the other stock components.

I drive hard, last thing I want to do is have to replace all of these within a years time.

The stock turbo is pretty small, I havent heard of may issues and it seems to be able to run boost upto18 psi without premature failure however I could be wrong hence wanted to get some input.

car has 55k miles on it
Appreciate 0
      06-15-2016, 11:16 AM   #4
JETmn
Lieutenant Colonel
United_States
245
Rep
1,595
Posts

Drives: 2011 335i xDrive Msport
Join Date: Apr 2013
Location: Orlando

iTrader: (0)

Garage List
2011 335Xi  [0.00]
Quote:
Originally Posted by Gunner_27 View Post
Yes protune is my next step, I am just about install the fimic...

When I say too aggressive , I am putting it in regards to the stock oil cooler and sway bars and all the other stock components.

I drive hard, last thing I want to do is have to replace all of these within a years time.

The stock turbo is pretty small, I havent heard of may issues and it seems to be able to run boost upto18 psi without premature failure however I could be wrong hence wanted to get some input.

car has 55k miles on it
I don't understand how the tune/FMIC would have anything to do with the suspension in the car? All you are going to be doing is picking up a little HP, probably like 15-20whp.
__________________
2011 335Xi 6AT - VRSF catless DP - VRSF 7" FMIC with turbo inlet pipe - VRSF chargepipe - Pure Stage 1 turbo - JB4 - E30 - xHP Stage 3 - Strongflex tension bushings - Whiteline RSFB - UUC rear swaybar
Appreciate 1
      06-15-2016, 11:25 AM   #5
theweebabySeamus
Captain
376
Rep
902
Posts

Drives: M3
Join Date: Jul 2014
Location: Bay Area

iTrader: (1)

Quote:
Originally Posted by Gunner_27 View Post
Yes protune is my next step, I am just about install the fimic...

When I say too aggressive , I am putting it in regards to the stock oil cooler and sway bars and all the other stock components.

I drive hard, last thing I want to do is have to replace all of these within a years time.

The stock turbo is pretty small, I havent heard of may issues and it seems to be able to run boost upto18 psi without premature failure however I could be wrong hence wanted to get some input.

car has 55k miles on it
Youre definitely overthinking it. I doubt you drive that hard in relation to the audience youre talking to.
Appreciate 0
      06-15-2016, 02:18 PM   #6
Gunner_27
Private First Class
United_States
24
Rep
173
Posts

Drives: E53 X5 (4.8is)
Join Date: Jun 2015
Location: United States

iTrader: (0)

Quote:
Originally Posted by theweebabySeamus View Post
Youre definitely overthinking it. I doubt you drive that hard in relation to the audience youre talking to.
Yeaaaa, I knida thought about that after I posted it. well, if it breaks , I will fix.

Thanks.
Appreciate 0
      06-15-2016, 09:02 PM   #7
LGCubana
Lieutenant
72
Rep
438
Posts

Drives: 2011 335i sedan
Join Date: Jul 2014
Location: SE Florida

iTrader: (2)

Cobb Stages

 Stage2+ COBB FMIC Aggressive
o Fuel Requirements: 93 or 94 OCT (98 RON) fuel o Intercooler Requirements: COBB Front Mount Intercooler or equivalent required. o Exhaust Requirements:
 Required: COBB Down Pipe.  Recommended: upgraded cat-back exhaust. o Charge Pipe Requirements: Upgraded metal charge pipe. o Intake Requirements: Upgraded high-flow intake system o Boost Targets: 18 psi peak tapering down to 11.5 psi by redline +/- 1.5psi
__________________
Quote:
Originally Posted by *******
Who did this sell to? Did buyer receive the intake?
Appreciate 1
      06-15-2016, 09:22 PM   #8
snaimpally
Major
United_States
136
Rep
1,192
Posts

Drives: 2011 335i MT
Join Date: Mar 2014
Location: Austin, TX

iTrader: (9)

Garage List
2011 BMW 335i  [0.00]
Quote:
Originally Posted by Gunner_27 View Post
Hey guys, just about to install my fimic to hit stage 2 plus on cobb, there are very few reviews out there regarding this subject nothing that I would consider well reviewed.

Does anyone have this ?
How long have you had it for ?

Is stage 2+ a bit too aggressive ?

I have a full stock body and rime, but full bolt ons, coils and XI

Any input appreciated.

Cheers.
Stage 2 is when you have ... at least a chargepipe and a downpipe and preferably a catback exhaust:
http://www.cobbtuning.com/maps/bmw-n...0b-stage-2-map

However, the off the shelf (OTS) Cobb tunes for N55 are not very good. Get a protune/etune from PTF or Wedge.

You should get a CP if you don't have one and also the GFB DV+ to hold boost
__________________
PTF Map, Pure Turbo Stage 1, GFB DV+, Mfactory LSD, AA FMIC, B12 Pro Kit, M3 FCA, AR DP and
Dynavin N6, Mosconi AS100.4, AS100.4, AS200.2, Micro Precision tweeters & woofers, Esotar2 1200
Appreciate 1
      06-15-2016, 10:44 PM   #9
Dekansnowman
Second Lieutenant
Dekansnowman's Avatar
83
Rep
240
Posts

Drives: 2011 335i Sedan Space Grey
Join Date: Jan 2016
Location: Houston, Tx

iTrader: (0)

I'm currently using Stage 2+ FMIC AGGRESSIVE and the best time I've ran was 13.2 in an E90. I'm also FBO, and have tried this with a full tank of 93, and then a 70/30 mix of E85.

When I go from a dead stop and launch, I'm roughly around that 18psi mark. Oddly enough, when I pass someone on the highway, I can get up to around 21.8psi.

If anyone has had a protune done with our similar setups, I would be very interested to see numbers and logs. I really want a solid answer on whether or not it's safe to squeeze more power out, or if I should continue saving for Pure Stage 2. It would be cool to have a tune now just to help pass time.
Appreciate 0
      06-16-2016, 07:02 PM   #10
Gunner_27
Private First Class
United_States
24
Rep
173
Posts

Drives: E53 X5 (4.8is)
Join Date: Jun 2015
Location: United States

iTrader: (0)

Quote:
Originally Posted by snaimpally View Post
Stage 2 is when you have ... at least a chargepipe and a downpipe and preferably a catback exhaust:
http://www.cobbtuning.com/maps/bmw-n...0b-stage-2-map

However, the off the shelf (OTS) Cobb tunes for N55 are not very good. Get a protune/etune from PTF or Wedge.

You should get a CP if you don't have one and also the GFB DV+ to hold boost
Fimic is my last bolt on, sticking to stock exhaust for now till i have some more $$

But yes CP was my first then got the DP and intake....

Thanks for the input
Appreciate 0
      06-16-2016, 07:07 PM   #11
Gunner_27
Private First Class
United_States
24
Rep
173
Posts

Drives: E53 X5 (4.8is)
Join Date: Jun 2015
Location: United States

iTrader: (0)

Quote:
Originally Posted by Dekansnowman View Post
I'm currently using Stage 2+ FMIC AGGRESSIVE and the best time I've ran was 13.2 in an E90. I'm also FBO, and have tried this with a full tank of 93, and then a 70/30 mix of E85.

When I go from a dead stop and launch, I'm roughly around that 18psi mark. Oddly enough, when I pass someone on the highway, I can get up to around 21.8psi.

If anyone has had a protune done with our similar setups, I would be very interested to see numbers and logs. I really want a solid answer on whether or not it's safe to squeeze more power out, or if I should continue saving for Pure Stage 2. It would be cool to have a tune now just to help pass time.
I am kinda in the same boat, with this fimic the turbo is going to be seeing some heavy duty work cycles , hence I dont want to end up with a damaged turbo , I am just at 50K miles... However it seems people on the forum drive more aggressively than I do and there have been very few complaints on this turbo so I am not worrying too much about it

I am getting a pro tune as the next step, its 250$ ish, look forward to that. If someone has a protune done or has a JB4 with cobb backend flash, please let advise
Appreciate 0
      06-21-2016, 04:17 PM   #12
BKBMW335I
Captain
United_States
157
Rep
772
Posts

Drives: '11 E93 335I
Join Date: Aug 2015
Location: Land of OZ, Kansas

iTrader: (0)

I'm stage 2 Aggressive on the Cobb AP3 and I have 4" DPs, CP and GFB DVs and 5" inch step FMIC and it is a night a day difference from Stg 1 and Stg 2 without these parts.

I've pulled up at 19 and up to 21 psi easily and I believe I could do more if I get the Protune, I'll more than likely do the PPK and then the Protune and see what I hit up after some datalogging.
Good luck with your set up, you'll enjoy it but get yourself some DPs.
__________________
Mods: MHD Stg 2, xHP Flashtool Stage 3, VRSF 3" Chargepipe, Megan 4" Downpipes, Pure N55 Inlet, Outlet, VSRF 5" Stepped Intercooler, GFB Diverter, BMS N55 Intake, Michelin Pilot Super Sport Tires, BMS Sport Oil Cooler Valve, CF Spoiler, CF Kidney Grille, CF Mirror Covers, CF Eyelids, CF Wheel Hub Covers, CF Diffuser, M Sport Racing Strip, 20% Tints, and Golf Tee Mod
Appreciate 0
      06-21-2016, 05:11 PM   #13
Gunner_27
Private First Class
United_States
24
Rep
173
Posts

Drives: E53 X5 (4.8is)
Join Date: Jun 2015
Location: United States

iTrader: (0)

Quote:
Originally Posted by BKBMW335I View Post
I'm stage 2 Aggressive on the Cobb AP3 and I have 4" DPs, CP and GFB DVs and 5" inch step FMIC and it is a night a day difference from Stg 1 and Stg 2 without these parts.

I've pulled up at 19 and up to 21 psi easily and I believe I could do more if I get the Protune, I'll more than likely do the PPK and then the Protune and see what I hit up after some datalogging.
Good luck with your set up, you'll enjoy it but get yourself some DPs.

Thanks man, I have FBO , Remus exhaust is on its way

I just went back to stage 2 , I am hitting 22psi easy, going to safe that for events.
Appreciate 1
      06-21-2016, 09:04 PM   #14
classyfast
Banned
671
Rep
2,219
Posts

Drives: e36m/e46m/E92 LCI 335/f30 335
Join Date: Mar 2015
Location: CT

iTrader: (0)

Quote:
Originally Posted by Dekansnowman
I'm currently using Stage 2+ FMIC AGGRESSIVE and the best time I've ran was 13.2 in an E90. I'm also FBO, and have tried this with a full tank of 93, and then a 70/30 mix of E85.

When I go from a dead stop and launch, I'm roughly around that 18psi mark. Oddly enough, when I pass someone on the highway, I can get up to around 21.8psi.

If anyone has had a protune done with our similar setups, I would be very interested to see numbers and logs. I really want a solid answer on whether or not it's safe to squeeze more power out, or if I should continue saving for Pure Stage 2. It would be cool to have a tune now just to help pass time.
What was your mph and your 60" time? 13.2 seems high considering your mods... I would think 12.6-12.9 would be the range??
Appreciate 0
      06-21-2016, 10:53 PM   #15
Cory S
Major
Cory S's Avatar
United_States
305
Rep
1,163
Posts

Drives: 2011 335i-X
Join Date: Oct 2015
Location: N.H.

iTrader: (0)

Quote:
Originally Posted by classyfast View Post
What was your mph and your 60" time? 13.2 seems high considering your mods... I would think 12.6-12.9 would be the range??
Probabably a RWD manual....or maybe RWD auto. All the ET would be lost at the 60'...
Appreciate 0
      06-22-2016, 06:34 PM   #16
classyfast
Banned
671
Rep
2,219
Posts

Drives: e36m/e46m/E92 LCI 335/f30 335
Join Date: Mar 2015
Location: CT

iTrader: (0)

Quote:
Originally Posted by Cory S
Quote:
Originally Posted by classyfast View Post
What was your mph and your 60" time? 13.2 seems high considering your mods... I would think 12.6-12.9 would be the range??
Probabably a RWD manual....or maybe RWD auto. All the ET would be lost at the 60'...
Yeah definitely.
Appreciate 0
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:15 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST