E90 Rear diffuser for Non Mtech/ M3 Bumpers

NJ330i · 03-09-2011, 02:59 PM

Quote:

Originally Posted by irq5

Problem is that this one is for the m-tech. It would be cool to put the slot and shape in but the issue there is the existing bumper. I could do something like this but it would definitely require cutting the bumper and I'm trying to avoid that so that it's as "direct" bolt-on as possible.

I can have it come down lower than the bumper a bit and include a horizontal slot like this one does if people reckon it's a good idea...

I think it will look ok with the cut-outs and you can see the color of the bumper underneath. my 2 cents

irq5 · 03-09-2011, 11:47 PM

Quote:

Originally Posted by NJ330i

I think it will look ok with the cut-outs and you can see the color of the bumper underneath. my 2 cents

What does everyone else thing? It might add just a little extra to the design...

11secLightning · 03-10-2011, 12:41 AM

Is this going to be in production soon? Possible ETA

BMW Jet · 03-10-2011, 01:42 AM

I am interested in a CF diffuser for my
Pre-LCI E90 non 335.
Dual Quad exhaust
"with or without flips" not before I check the design.

(I guess that is the 2nd chart in your post)

irq5 · 03-10-2011, 05:59 AM

Quote:

Originally Posted by 11secLightning

Is this going to be in production soon? Possible ETA

Hopefully within the next 6 months. Have picked up a bumper to develop from (pre-LCI, non-335) and will be delivering and discussing with the moulders on Monday next week.

Will do my best to have it out as soon as possible.

Quote:

Originally Posted by BMW Jet

I am interested in a CF diffuser for my
Pre-LCI E90 non 335.
Dual Quad exhaust
"with or without flips" not before I check the design.

(I guess that is the 2nd chart in your post)

As stated above, the first product will more than likely be the non-335, single cut-out with no fins. Soon as that one is done I'll being work on the 335 dual setup (second most popular so far from the responses). Then will move into the quad setup for both non-335 and 335, unless the demand changes

klove83 · 03-10-2011, 09:11 AM

Quote:

Originally Posted by irq5

Quote:

Originally Posted by 11secLightning

Is this going to be in production soon? Possible ETA

Hopefully within the next 6 months. Have picked up a bumper to develop from (pre-LCI, non-335) and will be delivering and discussing with the moulders on Monday next week.

Will do my best to have it out as soon as possible.

Quote:

Originally Posted by BMW Jet

I am interested in a CF diffuser for my
Pre-LCI E90 non 335.
Dual Quad exhaust
"with or without flips" not before I check the design.

(I guess that is the 2nd chart in your post)

As stated above, the first product will more than likely be the non-335, single cut-out with no fins. Soon as that one is done I'll being work on the 335 dual setup (second most popular so far from the responses). Then will move into the quad setup for both non-335 and 335, unless the demand changes

I don't like this... So I tried getting this going and now I won't see this for a good year or so cause I want dual quads?

e92stance · 03-10-2011, 01:26 PM

Anything for e92 335? im in it for that!!!!

irq5 · 03-10-2011, 01:28 PM

Quote:

Originally Posted by klove83

I don't like this... So I tried getting this going and now I won't see this for a good year or so cause I want dual quads?

Dammit - you're right. I lost sight of the fact that you started it in the first place...

I'm going to see the guy on Monday to chat about this work. Let me see what I can organise. Most of the moulding is going to be the same, so perhaps it'll only take a week or so longer to get the non-335 quad setup going.

Let me see what I can organise. Either way I'll defiinitely switch the order around so that we go non-335 dual, non-335 quad, 335 dual, 335 quad instead...

klove83 · 03-10-2011, 01:36 PM

Quote:

Originally Posted by irq5

Quote:

Originally Posted by klove83

I don't like this... So I tried getting this going and now I won't see this for a good year or so cause I want dual quads?

Dammit - you're right. I lost sight of the fact that you started it in the first place...

I'm going to see the guy on Monday to chat about this work. Let me see what I can organise. Most of the moulding is going to be the same, so perhaps it'll only take a week or so longer to get the non-335 quad setup going.

Let me see what I can organise. Either way I'll defiinitely switch the order around so that we go non-335 dual, non-335 quad, 335 dual, 335 quad instead...

Thanks I'd appreciate that

Ill be waiting

Chard · 03-10-2011, 05:22 PM

can someone photoshop the 335i rear with fins?
https://picasaweb.google.com/lh/phot...eat=directlink
https://picasaweb.google.com/lh/phot...eat=directlink

Chard · 03-10-2011, 05:43 PM

fyi, found this pic in another thread. this is a painted bottom

klove83 · 03-10-2011, 06:45 PM

Quote:

Originally Posted by Chard

fyi, found this pic in another thread. this is a painted bottom

Looks photo chopped to me. Also that is what i did in my 1st post also. Thats fine for someone who wants to run singles but I want to run dual quads on my non 335... so I need to cut an opening on my original bumper and have a diffuser over it to make the likes clean.

sterz85 · 03-10-2011, 08:06 PM

Quote:

Originally Posted by klove83

Looks photo chopped to me. Also that is what i did in my 1st post also. Thats fine for someone who wants to run singles but I want to run dual quads on my non 335... so I need to cut an opening on my original bumper and have a diffuser over it to make the likes clean.

which spoiler is that?

irq5 · 03-10-2011, 11:59 PM

Quote:

Originally Posted by sterz85

which spoiler is that?

I don't think it's a spoiler - I think it's a CSL style trunk...

MrSkinny · 03-11-2011, 07:09 AM

Have you guys thought about just doing a vinyl wrap? That would be the lowest cost solution and the good thing is it won't stick out an inch and will be flush with the existing bumper. You could do matte black, cf whatever

klove83 · 03-11-2011, 12:36 PM

Quote:

Originally Posted by MrSkinny

Have you guys thought about just doing a vinyl wrap? That would be the lowest cost solution and the good thing is it won't stick out an inch and will be flush with the existing bumper. You could do matte black, cf whatever

How hard is it to grasp the concept of why I want the diffuser made?

sterz85 · 03-12-2011, 05:22 PM

Quote:

Originally Posted by irq5

I don't think it's a spoiler - I think it's a CSL style trunk...

i dunno, i found this
http://cgi.ebay.com/ebaymotors/UNPAI...#ht_8693wt_939

irq5 · 03-14-2011, 05:20 AM

Quote:

Originally Posted by sterz85

i dunno, i found this
http://cgi.ebay.com/ebaymotors/UNPAI...#ht_8693wt_939

Yeah - have seen those, but I don't think the original picture was a spoiler add-on - I think it was the actual CSL trunk. I'm sure I've seen it before in the "Aero part's" sticky

klove83 · 03-14-2011, 08:20 PM

Yes my car has a spoiler

klove83 · 03-15-2011, 07:35 PM

Did this idea die?

NJ330i · 03-15-2011, 07:41 PM

im waiting

irq5 · 03-15-2011, 11:44 PM

Quote:

Originally Posted by klove83

Did this idea die?

Which idea? The diffuser idea? Certainly not...

I've got the bumper and have dropped if off at the moulder - he's taking a casting from the bumper itself and will be working on the modifications as soon as he's completed the m-tech one this Friday (03/18)...

Sorry that I haven't given an update - been a bit busy these past couple days...

03-10-2011, 12:41 AM	#69
11secLightning Enlisted Member 0 Rep 45 Posts Drives: 2006 BMW 325i Sport Join Date: Dec 2010 Location: Albuquerque,NM iTrader: (0)	Is this going to be in production soon? Possible ETA __________________ 2006 BMW 325i sport 18" VMR wheels 2001 Lightning fully built 11.98@122 w/o N2O 1991 Mustang GT 5.0 Vortech S/C
	Appreciate 0 Quote

03-10-2011, 01:42 AM	#70
BMW Jet BMW addict 21 Rep 256 Posts Drives: AW 2006 330i Soon to be F80 Join Date: Oct 2009 Location: SS iTrader: (0) Garage List 2006 E90 330i [10.00]	I am interested in a CF diffuser for my Pre-LCI E90 non 335. Dual Quad exhaust "with or without flips" not before I check the design. (I guess that is the 2nd chart in your post) __________________ Quad Exhaust / Glossy Black Grill / Carbon Fiber mirrors / OEM Rear Spoiler / Mtec V2 AE / GP Thunder beams / 7500k Fog lights / Interior light LEDs / License LEDs / Trunk LED / Black Air scoops
	Appreciate 0 Quote

03-10-2011, 01:26 PM	#73
e92stance Banned 23 Rep 960 Posts Drives: e92 LCI 335 msport Join Date: Oct 2010 Location: MD iTrader: (0)	Anything for e92 335? im in it for that!!!!
	Appreciate 0 Quote

03-10-2011, 05:22 PM	#76
Chard Second Lieutenant 15 Rep 242 Posts Drives: E90 330i Join Date: Mar 2010 Location: Honolulu iTrader: (3)	can someone photoshop the 335i rear with fins? https://picasaweb.google.com/lh/phot...eat=directlink https://picasaweb.google.com/lh/phot...eat=directlink
	Appreciate 0 Quote

03-10-2011, 05:43 PM	#77
Chard Second Lieutenant 15 Rep 242 Posts Drives: E90 330i Join Date: Mar 2010 Location: Honolulu iTrader: (3)	fyi, found this pic in another thread. this is a painted bottom
	Appreciate 0 Quote

03-11-2011, 07:09 AM	#81
MrSkinny First Lieutenant 21 Rep 367 Posts Drives: 335i Join Date: Oct 2005 Location: GTA iTrader: (7)	Have you guys thought about just doing a vinyl wrap? That would be the lowest cost solution and the good thing is it won't stick out an inch and will be flush with the existing bumper. You could do matte black, cf whatever
	Appreciate 0 Quote

03-14-2011, 08:20 PM	#85
klove83 Captain 65 Rep 653 Posts Drives: Red E90, Red E36 M3 Join Date: Dec 2010 Location: Colorado Springs, CO iTrader: (1) Garage List 1968 Dodge Charger R/T [10.00]	Yes my car has a spoiler __________________
	Appreciate 0 Quote

03-15-2011, 07:35 PM	#86
klove83 Captain 65 Rep 653 Posts Drives: Red E90, Red E36 M3 Join Date: Dec 2010 Location: Colorado Springs, CO iTrader: (1) Garage List 1968 Dodge Charger R/T [10.00]	Did this idea die? __________________
	Appreciate 0 Quote

03-15-2011, 07:41 PM	#87
NJ330i Major 79 Rep 1,369 Posts Drives: 2006 Electric Red 330i Join Date: Feb 2010 Location: New Jersey iTrader: (29) Garage List 2006 BMW [9.50]	im waiting
	Appreciate 0 Quote