[CrackedatBMW]

Oke this is also the problem why i can't read a x5 e7p you think?

[shawnsheridan]

Originally Posted by CrackedatBMW

Oke this is also the problem why i can't read a x5 e7p you think?

No idea. Is your EDIBAS.ini and OBD.ini set properly for K+DCAN Cable?

[CrackedatBMW]

Yes edibas stdbd
Comport 1
Mesc 1

[CrackedatBMW]

Yes
Edibas:
Stdbd

Comport 1
Mesc 1

[shawnsheridan]

Originally Posted by CrackedatBMW

Yes edibas stdbd
Comport 1
Mesc 1

Then I have no idea why.

[CrackedatBMW]

I have take a screenahit for you

[shawnsheridan]

Originally Posted by CrackedatBMW

I have take a screenahit for you

Are the EDIABAS.ini and OBD.ini located in the ISTA EDIABAS folder (NOT C:\EDIABAS folder)?

[CrackedatBMW]

This problem muat be gone now if i did what you said with the regiatry

[CrackedatBMW]

Originally Posted by shawnsheridan

Are the EDIABAS.ini and OBD.ini located in the ISTA EDIABAS folder (NOT C:\EDIABAS folder)?

Let me check that, i send a screenahot of the edibas folder in c drive

[shawnsheridan]

Originally Posted by CrackedatBMW

Let me check that, i send a screenahot of the edibas folder in c drive

I don't need a picture. And you need to use the .ini files in ISTA Folder, not C:\EDIABS folder.

[CrackedatBMW]

Originally Posted by shawnsheridan

Are the EDIABAS.ini and OBD.ini located in the ISTA EDIABAS folder (NOT C:\EDIABAS folder)?

Edibas is located in c: ec-apps> ista>ediabas-bin is ediabas located it is on remote

And the obd.ini file is not there

[shawnsheridan]

Originally Posted by CrackedatBMW

Edibas is located in c: ec-apps> ista>ediabas-bin is ediabas located it is on remote

And the obd.ini file is not there

Assuming you installed ISTA into c:\ec-apps\ista, then the 2 .ini files in c:\ec-apps\ista\ediabas must both be set for K+CAN Cable, and for EDIABAS.ini it is "INTERFACE = STD:OBD".

[CrackedatBMW]

Oke this is the ediabas in ista

Must be set like this?

Also i don't hav a obd.ini file in the ista ediabas

[shawnsheridan]

Originally Posted by CrackedatBMW

Oke this is the ediabas in ista

Must be set like this?

Also i don't hav a obd.ini file in the ista ediabas

No. Why does it have K+DCAN there? It is just:

INTERFACE = STD:OBD

And you need to put OBD.ini in same folder as EDIABAS.ini.

[CrackedatBMW]

Oke, i can just coppy the obd.ini file from ediabas to ista>ediabas? There?


Also i think i need to change it when i wan't tonuse the enet cabele then i need it to set it to enet i assume?

[shawnsheridan]

Originally Posted by CrackedatBMW

Oke, i can just coppy the obd.ini file from ediabas to ista>ediabas? There?

Also i think i need to change it when i wan't tonuse the enet cabele then i need it to set it to enet i assume?

Yes, copy it.

"INTERFACE = STD:OBD" (K+DCAN Cable)
"INTERFACE =ENET" (ENET Cable - If also using for F/I/G Series cars)

[CrackedatBMW]

Oke so i think that was the problem why i can't read a bmw x5 e70


Strange thing is i never edited it and i alway can read. A e90 series

[shawnsheridan]

Originally Posted by CrackedatBMW

Oke so i think that was the problem why i can't read a bmw x5 e70

Strange thing is i never edited it and i alway can read. A e90 series

If you can read an E90, then you can Read an E70, assuming E70 itself has no issue like poor cable connection, etc.

[CrackedatBMW]

I always can read e series but now noy a x5 e70 2012 thats weird right
?

[shawnsheridan]

Originally Posted by CrackedatBMW

I always can read e series but now noy a x5 e70 2012 thats weird right
?

Yes. Nothing is different between E70 and E90 connection but the cars themselves.

[CrackedatBMW]

I mean not only a e70 i mean x5e70

[CrackedatBMW]

Maybe its a software issue or someting ita not supported