[E90Menace]

Considering purchasing these wheels in 18” staggered:
JNC004 Silver Machined Lip

I am currently running:
18" Style 030 Wheels - Staggered Set Of Four
18x8"/18x9" ET35 72.6CB 5x120. Matte black

I was wondering if this would just be an easy swap taking my tires off the current 18” set up and throwing the tires onto these JNC’s and If I would have any issues as far as having to shave the fender liner or anything to get them on.

I have a 2009 323i (E90) with stock suspension.

Thank you

[Vivek.]

8 and 9" et35 is a fairly reasonable setup on e90 so you should have no rubbing. You'll want tire widths of at least 225 and 255, I'd say preferably 235-245 in the front and 255-265 in the back, so if your current tires meet this criteria they should be good to swap over.

But get them in silver, not black...and now I'm confused after re-reading your post, is 8" and 9" et35 the proposed new setup or the current setup?

[E90Menace]

Originally Posted by Vivek.

8 and 9" et35 is a fairly reasonable setup on e90 so you should have no rubbing. You'll want tire widths of at least 225 and 255, I'd say preferably 235-245 in the front and 255-265 in the back, so if your current tires meet this criteria they should be good to swap over.

But get them in silver, not black...and now I'm confused after re-reading your post, is 8" and 9" et35 the proposed new setup or the current setup?

I have Firehawk indys @ that tire sizing on my staggered set up