E90Post
 


Studio RSR
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > seat airbags, seat occupancy sensor disable ?



Reply
 
Thread Tools Search this Thread
      04-21-2015, 06:41 AM   #67
RogeroK
Banned
5
Rep
4
Posts

Drives: E93 335I 2007
Join Date: Jan 2015
Location: Lebanon

iTrader: (0)

Correct Parameters to Disable the Occupancy Sensor

Hello,

Finally I got mine disabled after spending 2 long nights trying to clear the 2 x ACSM2.C09 codes :
- 93C1 Seat occupancy detector, passenger
- 93C3 Seat occupancy detector, passenger

which caused the infamous and very annoying "Passenger Restraint System Malfunction" error on the Idrive/OBC on my E93 335i 03/2007.

I figured out the correct way to do it because disabling the 2 x OC3 parameters, unplugging the 3 x wires Plug under the passenger seat and clearing the error memory with Inpa didn't clear out the errors.

I spent some time disabling other parameters and testing till I got it done at the end, The Passenger Seat Belt Sensor and Seat Belt warning also have to be disabled in order to clear out the error.

I have attached a photo from my Airbag/ACSM2.C09 ECU after having the errors cleared, with all the needed parameters to be Disabled,
Hopefully this will help someone fix this very annoying error too.

Cheers
Rogero.
Attached Images
 
Appreciate 2
Molec21.00
triax37130.00
      09-21-2015, 05:49 PM   #68
Tamboy
Private
Canada
0
Rep
51
Posts

Drives: 2011 335is Convertible
Join Date: Sep 2015
Location: Markham, Ontario, Canada

iTrader: (0)

Hi,

I recently had to remove my driver's seat to change the seat belt receiver. I now have the Air Bag Light stuck on. Apparently it can be turned off if I disconnect the occupancy sensor mat and then turning it off using NCSEXPERT.

The posts that I've read say the connector is at the back of the seat but I can't find any plug at the back of the seat, only the plugs at the front of the seat. Anyone know which plug needs to be disconnected? It's a 2007 335i E93.

Also, is there a way to de-activate it using the JB4? I was able to disable the TPMS using JB4 and if there's a way to do this for the air bag, that would be great also.

Thanks!
Ken
Appreciate 0
      09-26-2015, 03:35 PM   #69
SeanS54
Captain
SeanS54's Avatar
United_States
167
Rep
838
Posts

Drives: N54 LCI 335i M-Sport
Join Date: Jan 2011
Location: Bay Area, CA

iTrader: (20)

Quote:
Originally Posted by Tamboy View Post
Hi,

I recently had to remove my driver's seat to change the seat belt receiver. I now have the Air Bag Light stuck on. Apparently it can be turned off if I disconnect the occupancy sensor mat and then turning it off using NCSEXPERT.

The posts that I've read say the connector is at the back of the seat but I can't find any plug at the back of the seat, only the plugs at the front of the seat. Anyone know which plug needs to be disconnected? It's a 2007 335i E93.

Also, is there a way to de-activate it using the JB4? I was able to disable the TPMS using JB4 and if there's a way to do this for the air bag, that would be great also.

Thanks!
Ken
Occupancy mat is only for the passenger seat, not the driver.

You can clear the code with JB4 speedo 1 and tach 6.
Appreciate 0
      09-30-2015, 07:09 PM   #70
morto
New Member
2
Rep
14
Posts

Drives: BMW E90
Join Date: Sep 2013
Location: London

iTrader: (0)

Quote:
Originally Posted by RogeroK View Post
Hello,

Finally I got mine disabled after spending 2 long nights trying to clear the 2 x ACSM2.C09 codes :
- 93C1 Seat occupancy detector, passenger
- 93C3 Seat occupancy detector, passenger

Cheers
Rogero.
Excellent job Rogero!!! This coding help me to remove warning lights on my e90 320d from 2005!

Many thanks!!!!

Last edited by morto; 11-18-2015 at 02:57 PM..
Appreciate 0
      10-04-2015, 09:03 PM   #71
Tamboy
Private
Canada
0
Rep
51
Posts

Drives: 2011 335is Convertible
Join Date: Sep 2015
Location: Markham, Ontario, Canada

iTrader: (0)

Thanks Rogero! Will give it a try!

Cheers
Ken
Appreciate 0
      10-05-2015, 05:30 PM   #72
Tamboy
Private
Canada
0
Rep
51
Posts

Drives: 2011 335is Convertible
Join Date: Sep 2015
Location: Markham, Ontario, Canada

iTrader: (0)

Sorry, meant to include thanks to Sean S54!
Appreciate 0
      02-21-2016, 09:59 PM   #73
J. Dub
Bob Saget
J. Dub's Avatar
United_States
354
Rep
2,230
Posts

Drives: 2010 335i e92 N54 A/T
Join Date: Jun 2010
Location: AR - 501

iTrader: (15)

Quote:
Originally Posted by tinpot View Post
I've disabled seat airbags and seat occupancy on my E92 M3. PM me if you still need this on your car.
I need to disable BOTH passenger and driver seat airbag along with seat occupancy sensor HOWEVER, I still want both passenger and driver FRONT air bags to go off.
I'd like the side airbags to go off too but someone told me side airbags are built into my OEM seats and my new recaro seats do not have the side airbags. So not sure what's what there
__________________
In memory of Robert E. Flynn (AR)
Appreciate 0
      02-22-2016, 09:40 PM   #74
testdriver
Private First Class
Hong Kong
26
Rep
137
Posts

Drives: E92 M3 6spd
Join Date: Jan 2012
Location: HK

iTrader: (0)

Quote:
Originally Posted by J. Dub View Post
I need to disable BOTH passenger and driver seat airbag along with seat occupancy sensor HOWEVER, I still want both passenger and driver FRONT air bags to go off.
I'd like the side airbags to go off too but someone told me side airbags are built into my OEM seats and my new recaro seats do not have the side airbags. So not sure what's what there
Look at your oem seat... the side airbag is build in to it. If you change you original seat for Recaro race seat, you will lose the side airbag. Unless you have a Recaro which also has side airbag in there (like the M Perf. CS seat).
__________________
E92 6spd, Endless 6POT w/ MX72Plus, W003 & ME22. KW Clubsport 3 way, Akra Evo, Rays ZE40 w/ RE71R, BPM tune
Appreciate 0
      02-22-2016, 11:06 PM   #75
J. Dub
Bob Saget
J. Dub's Avatar
United_States
354
Rep
2,230
Posts

Drives: 2010 335i e92 N54 A/T
Join Date: Jun 2010
Location: AR - 501

iTrader: (15)

Quote:
Originally Posted by testdriver View Post
Look at your oem seat... the side airbag is build in to it. If you change you original seat for Recaro race seat, you will lose the side airbag. Unless you have a Recaro which also has side airbag in there (like the M Perf. CS seat).
So the a pillar and C pillar air bags must be side curtain airbags?

Do you think if I code out the seats airbags that the front airbags and side curtain airbags will still go off in a crash?
What about seat belt pre-tensioners?

My fear if I code out my front seat side airbags is that the pretensioner, front airbags, and side curtains will not deploy
__________________
In memory of Robert E. Flynn (AR)
Appreciate 0
      02-23-2016, 12:42 AM   #76
testdriver
Private First Class
Hong Kong
26
Rep
137
Posts

Drives: E92 M3 6spd
Join Date: Jan 2012
Location: HK

iTrader: (0)

Quote:
Originally Posted by J. Dub View Post
So the a pillar and C pillar air bags must be side curtain airbags?

I believe so

Do you think if I code out the seats airbags that the front airbags and side curtain airbags will still go off in a crash?
What about seat belt pre-tensioners?

My fear if I code out my front seat side airbags is that the pretensioner, front airbags, and side curtains will not deploy
I think "code out" only means you cut off their monitor signal. If you do the above, I believe your frontal & A-pillar airbag will still function as normal.
*** someone correct me if I'm wrong on this one.

I put a Recaro race seat on my driver side... and I code the Driver's side-airbag to disable and clear the warning light on dashboard. Since I reuse the original seat belt component on my Recaro so I don't think it has any affect on it.
__________________
E92 6spd, Endless 6POT w/ MX72Plus, W003 & ME22. KW Clubsport 3 way, Akra Evo, Rays ZE40 w/ RE71R, BPM tune
Appreciate 1
      02-23-2016, 08:43 AM   #77
J. Dub
Bob Saget
J. Dub's Avatar
United_States
354
Rep
2,230
Posts

Drives: 2010 335i e92 N54 A/T
Join Date: Jun 2010
Location: AR - 501

iTrader: (15)

Quote:
Originally Posted by testdriver View Post
I think "code out" only means you cut off their monitor signal. If you do the above, I believe your frontal & A-pillar airbag will still function as normal.
*** someone correct me if I'm wrong on this one.

I put a Recaro race seat on my driver side... and I code the Driver's side-airbag to disable and clear the warning light on dashboard. Since I reuse the original seat belt component on my Recaro so I don't think it has any affect on it.
I really hope that's the case.
I still want the side curtain from A pillar to C pillar, along with seat belt tensioner to still work even though you and I disable side impact airbags.
__________________
In memory of Robert E. Flynn (AR)
Appreciate 0
      02-23-2016, 12:11 PM   #78
808AWD325xi
Ballin' out of control.
808AWD325xi's Avatar
No_Country
519
Rep
1,289
Posts

Drives: 2009 335i
Join Date: Jul 2007
Location: Moline, IL

iTrader: (0)

My assumption is that if the Seat Occupancy Detector (OC-3 Mat) is coded out, the MRS5 module will behave as though the sensor is faulty and assume that the passenger seat is occupied and activate the restraint systems. Otherwise, the indicator for front passenger airbag deactivation would be lit. If that is in fact the case, the front passenger seat would no longer be safe for a small child in a child restraint system.

I also believe that the seat belt tensioner is activated as long as the seat belt is fastened. Of course, all of this is speculative as the US MRS system differs from the rest of the world due to NHTSA regulations making it difficult to determine the exact functionality without a crash test dummy...caveat emptor!

MRS5 Manual

http://workshop-manuals.com/bmw/3_se...e92/page_4511/

http://beta.askatech.com/AskATechLiv...er.ashx?a=2316
__________________
Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms
Appreciate 1
      02-23-2016, 01:08 PM   #79
J. Dub
Bob Saget
J. Dub's Avatar
United_States
354
Rep
2,230
Posts

Drives: 2010 335i e92 N54 A/T
Join Date: Jun 2010
Location: AR - 501

iTrader: (15)

Quote:
Originally Posted by 808AWD325xi View Post
My assumption is that if the Seat Occupancy Detector (OC-3 Mat) is coded out, the MRS5 module will behave as though the sensor is faulty and assume that the passenger seat is occupied and activate the restraint systems. Otherwise, the indicator for front passenger airbag deactivation would be lit. If that is in fact the case, the front passenger seat would no longer be safe for a small child in a child restraint system.

I also believe that the seat belt tensioner is activated as long as the seat belt is fastened. Of course, all of this is speculative as the US MRS system differs from the rest of the world due to NHTSA regulations making it difficult to determine the exact functionality without a crash test dummy...caveat emptor!

MRS5 Manual

http://workshop-manuals.com/bmw/3_se...e92/page_4511/

http://beta.askatech.com/AskATechLiv...er.ashx?a=2316
You're always coming across as the most knowledgeable when it comes to coding 808AWD325xi I just have to say thank you, again. You seem to know the most out of anyone on this board. Do you provide coding remotely? If so, what do you charge?
__________________
In memory of Robert E. Flynn (AR)
Appreciate 0
      02-23-2016, 02:15 PM   #80
808AWD325xi
Ballin' out of control.
808AWD325xi's Avatar
No_Country
519
Rep
1,289
Posts

Drives: 2009 335i
Join Date: Jul 2007
Location: Moline, IL

iTrader: (0)

Quote:
Originally Posted by J. Dub View Post
You're always coming across as the most knowledgeable when it comes to coding 808AWD325xi I just have to say thank you, again. You seem to know the most out of anyone on this board. Do you provide coding remotely? If so, what do you charge?
Thanks for the compliment, J. Dub! There are lots of smart folks around here. I'm just a DIYer that tries to the greatest extent possible to accomplish things in an OEM prescribed manner using OEM tools.

I don't provide remote coding services because I'm not an e90post forum sponsor.
__________________
Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms
Appreciate 1
      04-20-2016, 07:39 PM   #81
J. Dub
Bob Saget
J. Dub's Avatar
United_States
354
Rep
2,230
Posts

Drives: 2010 335i e92 N54 A/T
Join Date: Jun 2010
Location: AR - 501

iTrader: (15)

How are you getting into abg module? In NCSexpert I have CAS, FRM, NFRM one of those 3 I must choose first.
__________________
In memory of Robert E. Flynn (AR)
Appreciate 0
      04-21-2016, 12:02 AM   #82
808AWD325xi
Ballin' out of control.
808AWD325xi's Avatar
No_Country
519
Rep
1,289
Posts

Drives: 2009 335i
Join Date: Jul 2007
Location: Moline, IL

iTrader: (0)

Quote:
Originally Posted by J. Dub View Post
How are you getting into abg module? In NCSexpert I have CAS, FRM, NFRM one of those 3 I must choose first.
Read the FA (vehicle order) from the CAS or FRM/NFRM module (depending upon which FRM version you have) and then go back and select the ECU to be coded (i.e. ABG)...I usually consider CAS to be the authoritative source for the FA, FRM modules are too flaky...
__________________
Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms
Appreciate 1
      05-02-2016, 11:22 AM   #83
J. Dub
Bob Saget
J. Dub's Avatar
United_States
354
Rep
2,230
Posts

Drives: 2010 335i e92 N54 A/T
Join Date: Jun 2010
Location: AR - 501

iTrader: (15)

808AWD325xi question, I have LITERALLY nickte_active everything in my ABG module on my e92 using NCS dummies. I know my car took it cause the next day I pulled the module info again using NCS expert and loaded the new .trc file up to NCS dummies. Sure enough, everything is deactivated.

Yet, my gauges still show a restraint system malfunction. Is there something I'm missing? Is there a way to clear this in INPA and see if later it pops back up? I'm at a loss.

**EDIT** I cleared all codes in INPA and they still remain. Here is a list of codes on showing on MRS:
Attached Images
 
__________________
In memory of Robert E. Flynn (AR)

Last edited by J. Dub; 05-02-2016 at 12:52 PM..
Appreciate 0
      05-02-2016, 01:36 PM   #84
808AWD325xi
Ballin' out of control.
808AWD325xi's Avatar
No_Country
519
Rep
1,289
Posts

Drives: 2009 335i
Join Date: Jul 2007
Location: Moline, IL

iTrader: (0)

Quote:
Originally Posted by J. Dub View Post
808AWD325xi question, I have LITERALLY nickte_active everything in my ABG module on my e92 using NCS dummies. I know my car took it cause the next day I pulled the module info again using NCS expert and loaded the new .trc file up to NCS dummies. Sure enough, everything is deactivated.

Yet, my gauges still show a restraint system malfunction. Is there something I'm missing? Is there a way to clear this in INPA and see if later it pops back up? I'm at a loss.

**EDIT** I cleared all codes in INPA and they still remain. Here is a list of codes on showing on MRS:
Hi J. Dub, your probably going to have to add K-Words to your VO and then default code the appropriate modules (or the entire car if you're not sure which modules are impacted). For example, DBFA is for retrofitting passenger airbag deactivation, or RECA for retrofitting BMW performance sport seats.

All of the K-words for the E89 daten can be found in the C:\NCSEXPER\DATEN\E89AT.000 file.

Ping testdriver, maybe he can help:
http://www.e90post.com/forums/showthread.php?t=734738

I'm in the middle of a long distance move right now and don't have a lot of spare time to assist.

Best of luck and report back what worked for you!
__________________
Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms
Appreciate 1
      06-10-2017, 12:47 AM   #85
nuron
Private First Class
78
Rep
199
Posts

Drives: '07 328i
Join Date: Jul 2016
Location: Washington

iTrader: (0)

To anyone who is having trouble with disabling the occupancy sensor, I hope my experience helps--I spent hours and days enabling and disabling various codes, along with using different daten files and versions of NCS Expert and found these things to work:

Install latest version of NCS Expert (V4.0.1)
Make sure you have latest daten files (v60.1 as of this writing)
If you've messed around with activating and de-activating random sensors and modules, go ahead and do a fresh install from the daten file to the module (in this case, I did a fresh install of my ABG module)
Have your 4pin occupancy sensor plug connected
Power car on and load NCS Expert
Pull the ABG module as you normally would for coding
In my case, I set parameters OC3 and GK/OC3/POL to nicht_aktiv
Execute
Turn car off
Disconnect occupancy sensor plug
Turn car on and run INPA
Clear error codes through Functional Jobs and Karosserie > Airbag MRS5
Shut car off and wait 5 minutes

This is what worked for me. I read so many threads online and was getting frustrated. Just start fresh with the latest daten files and go from there. Good luck.

Last edited by nuron; 06-10-2017 at 01:16 PM..
Appreciate 0
      09-11-2017, 06:04 AM   #86
bfleming
First Lieutenant
96
Rep
398
Posts

Drives: Merc, VW, Porsche, Suzuki
Join Date: Dec 2016
Location: Herts, UK

iTrader: (0)

Garage List
I'm going to add my experience to this. Setting both OC3 parameters to nicht-aktiv & changing SBR_BEIFAHRER_1 to nicht_aktiv, then unplugging the occupancy sensor & clearing the codes worked perfectly.
SBR_BEIFAHRER_1 is the seat belt reminder for the passenger, which needs to be disabled as the module assumes there's someone sitting in the seat & they should be buckled up.
This was on a 2010 E90 LCI (euro spec).
Appreciate 0
      02-03-2018, 08:07 AM   #87
madskillzE90
Private First Class
United_States
25
Rep
167
Posts

Drives: E90 AWD
Join Date: Mar 2014
Location: Goodyear AZ

iTrader: (1)

I am also working on this issue with my 2006 e90.

Air bag light is on with one code passenger seat sensor.


I went through steps in NCS expert and Dummy

My airbag lights are still on
Code passenger seat sensor not coming up
But now I have a Tell Tale Lamp code???? Im lost lol

Last edited by madskillzE90; 02-03-2018 at 11:12 AM..
Appreciate 0
      02-03-2018, 08:21 AM   #88
Adieu
First Lieutenant
73
Rep
349
Posts

Drives: 335d
Join Date: Jun 2016
Location: socal

iTrader: (0)

Quote:
Originally Posted by madskillzE90 View Post
I am also working on this issue with my e90. I will post my results hopefully soon.
Disconnect unnecessary airbags stick 2.2 ohm resistors in their connectors.
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:13 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST