[HP Autosport]

Originally Posted by Ctebbs5

I have stock springs in the rear and would like to raise it a bit. What options as far as spring spacers do I have for stock springs?

These are meant to be used with 60 or 65mm ID springs. You best option using OE springs is springs from another model that will give you slightly higher ride height. For example, if you have a coupe or sedan, convertible rear springs will give you a higher ride height.

[John_01]

I'm about to have the HPA perches installed in my car. Do you recommend that they be glued to the body of the car, or is there anything apart from the springs to locate them?

[714-Bimmer]

Any spacer options to raise the rear just a bit, maybe .75 or an inch??

I don't really want to go to a coilover just yet because I hear they will usually slam the car and I don't want that. I want some space... maybe .5 in the front and .75 in the rear.. I want to get meatier tires.

Thanks,
Mark

[feuer]

Originally Posted by 714-Bimmer

Any spacer options to raise the rear just a bit, maybe .75 or an inch??

I don't really want to go to a coilover just yet because I hear they will usually slam the car and I don't want that. I want some space... maybe .5 in the front and .75 in the rear.. I want to get meatier tires.

Thanks,
Mark

Yes, coil/spring pads from older 3-series. Search the threads.