[eyehategod]

Nothing super special going on here. Just bought it a couple of months ago, no tuning done yet. Sitting on VMR v710's with 12mm spacers in the rears, 235/30/19 front 275/35/19 rear with the fenders rolled. Then I had endlinks and a control arm replaced, along with a KW V1 coilover kit and some new DBA 4000 rotors for the front (still need em for the rear). Standard stuff, but she's mine

[mike@x-ph.com]

Looks good

[dublin14]

Sweet! Just curious what offset you have?

I have Niche M147's coming - 19×8.5 et35 - 19×10 et40 on v1 coilovers 235 fronts - 275 rears. Firehawk indy 500s plus an M3 front end kit.

Are you getting any rub at all?

Btw... Paint those calipers silver even with a clear finish ro really set off the nice wheels and rotors.

[eyehategod]

Originally Posted by dublin14

Sweet! Just curious what offset you have?

I have Niche M147's coming - 19×8.5 et35 - 19×10 et40 on v1 coilovers 235 fronts - 275 rears. Firehawk indy 500s plus an M3 front end kit.

Are you getting any rub at all?

Btw... Paint those calipers silver even with a clear finish ro really set off the nice wheels and rotors.

Yeah I plan to order some silver paint for the calipers! Good call on that.
The offset for these wheels is wrong since I bought them used, so I'm running:

VMR v710
F: 19x8.5 et 35, 235/35/r19
R: 19x9.5 et 45, 275/30/r19

I bought 12mm spacers for the rears bringing the offset down to 33 in the rear. With a 275 tire in the rear I was getting rub with the back end tucked pretty much all the way in, so I did have my fenders rolled. Front is fine, but I'm running reverse rake for now because I don't want my front end lower than your average curb.

[King Rudi]

Nice ride man!

[Sales@wheelsdc.com]

Nice