Meth Kits AEM vs Snow with MHD

NRigs · 12-06-2018, 09:24 AM

Does anyone have either of these kits with the controller with MHD? What percent mixture water and meth are you using? Do you have a custom tune or are you using an OTS map?

Any info helps. Thanks!

NRigs · 12-18-2018, 12:56 PM

Anyone?

Pladi · 12-18-2018, 01:33 PM

MHD has nothing to do with controlling your METH kit. Although i dont have a meth kit installed on my BMW i did on my mazdaspeed. Aquamist one.

The meth controller will adjust that amount mased on ur boost/MAP sensor or MAF, as well as for direct injected PWM of injector. Those are some of the popular modes.

So as long as you spray in conjunction with one of those parameters or a combination of 2 you should be good. This control is done from the meth controller. It reads ur DME info. ( Case of aquamist controller)

You can than tune with this but the tune does not "control the meth". It will work together with it.

Idk if i was clear enough.

NRigs · 12-18-2018, 02:30 PM

Quote:

Originally Posted by Pladi

MHD has nothing to do with controlling your METH kit. Although i dont have a meth kit installed on my BMW i did on my mazdaspeed. Aquamist one.

The meth controller will adjust that amount mased on ur boost/MAP sensor or MAF, as well as for direct injected PWM of injector. Those are some of the popular modes.

So as long as you spray in conjunction with one of those parameters or a combination of 2 you should be good. This control is done from the meth controller. It reads ur DME info. ( Case of aquamist controller)

You can than tune with this but the tune does not "control the meth". It will work together with it.

Idk if i was clear enough.

Yes, that is clear. Thank you for the info. I am interested to see if anyone is using these two particular kits though. To be more specific; connected to just one nozzle through the charge pipe and which nozzle size are people using, are people using an OTS MHD map or custom map, and what mixture of water meth is being used. Is 50/50 the best and safest that is geared towards both power and cooling?

Turbod · 12-18-2018, 05:24 PM

I had the AEM controller with the BMS Cooling Mist kit while running MHD. I didn't tune the car differently with methanol but also think I may have had an issue with the flow since I didn't see as much benefit as when I was running the FSB on the JB4. At the time I was running about 50/50 mix.

Pladi · 12-18-2018, 09:16 PM

Ant speak for specific kits and nozzles. But the biggest benefit of running these kits is to advance timing. That gives u torque. Thats why meth kits are so popular with diesel cars. Meth and water are soo good at supressing knock. You have to have a custom tune to take advantage of this supression.

12-06-2018, 09:24 AM	#1
NRigs Lieutenant 94 Rep 321 Posts Drives: 2011 BMW 335xi Join Date: Feb 2017 Location: Ma iTrader: (0)	Meth Kits AEM vs Snow with MHD Does anyone have either of these kits with the controller with MHD? What percent mixture water and meth are you using? Do you have a custom tune or are you using an OTS map? Any info helps. Thanks! __________________ Current: 2011 BMW 335xi \| Wedge Tuned \| Meth \| VRSF DP \| VRSF 5" Intercooler \| VRSF Chargepipe \| BMS Intake \| xHP Stg 3 Totaled:2014 Audi A4 CTS K04 APR Tuned
	Appreciate 0 Tweet Quote

12-18-2018, 12:56 PM	#2
NRigs Lieutenant 94 Rep 321 Posts Drives: 2011 BMW 335xi Join Date: Feb 2017 Location: Ma iTrader: (0)	Anyone? __________________ Current: 2011 BMW 335xi \| Wedge Tuned \| Meth \| VRSF DP \| VRSF 5" Intercooler \| VRSF Chargepipe \| BMS Intake \| xHP Stg 3 Totaled:2014 Audi A4 CTS K04 APR Tuned
	Appreciate 0 Quote

12-18-2018, 01:33 PM	#3
Pladi Lieutenant Colonel 718 Rep 1,753 Posts Drives: 2011 335i xdrive Join Date: Nov 2017 Location: Waterloo, ON Canada iTrader: (0)	MHD has nothing to do with controlling your METH kit. Although i dont have a meth kit installed on my BMW i did on my mazdaspeed. Aquamist one. The meth controller will adjust that amount mased on ur boost/MAP sensor or MAF, as well as for direct injected PWM of injector. Those are some of the popular modes. So as long as you spray in conjunction with one of those parameters or a combination of 2 you should be good. This control is done from the meth controller. It reads ur DME info. ( Case of aquamist controller) You can than tune with this but the tune does not "control the meth". It will work together with it. Idk if i was clear enough.
	Appreciate 0 Quote

12-18-2018, 05:24 PM	#5
Turbod Major 396 Rep 1,210 Posts Drives: 2014 E84 X1 35i M Sport Join Date: Mar 2015 Location: Oregon iTrader: (0)	I had the AEM controller with the BMS Cooling Mist kit while running MHD. I didn't tune the car differently with methanol but also think I may have had an issue with the flow since I didn't see as much benefit as when I was running the FSB on the JB4. At the time I was running about 50/50 mix. __________________ 2011 E92 335i \| 11.7@125 SOLD 2017 Camaro SS \| 12.7@114 SOLD 2019 Audi TT RS \| 10.5@130 SOLD 2020 F97 X3M \| 11.0@123 2023 G80 M3 xDrive
	Appreciate 0 Quote

12-18-2018, 09:16 PM	#6
Pladi Lieutenant Colonel 718 Rep 1,753 Posts Drives: 2011 335i xdrive Join Date: Nov 2017 Location: Waterloo, ON Canada iTrader: (0)	Ant speak for specific kits and nozzles. But the biggest benefit of running these kits is to advance timing. That gives u torque. Thats why meth kits are so popular with diesel cars. Meth and water are soo good at supressing knock. You have to have a custom tune to take advantage of this supression.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search