e85 bluetooth content analyzers and installation kits!

str8shot · 07-31-2015, 09:29 AM

BIMMERPOST / Classifieds

Asking Price:

USD 20.00

Location:

✓ Will Ship

Item Interest

What you see here is my ethanol content analyzer (ECA) solution. This is 100% compatible with the Fuel-it brand sensor installation kits at a fraction of the cost.

This will allow you to read the data stream from a standard continental flex fuel sensor and view the data in several different ways.

All ECA's feature interlocking connectors, a new 5 volt power supply, are prewired for upgradeability (Bluetooth and the digital display can be added after purchase) and feature upgradeable firmware via USB.

Packages are:

Package A - Standard ECA; $80.00 shipped - my analyzer with a 0-5 volt output lead for use with JB4 (or any other display / ECU that uses a 0-5v input). This will display your ethanol content over pin 15 of the JB4 harness (typically used for meth flow). You can then view your ethanol content via gauge high jacking, over the JB4 mobile app, and it will be logged as well. Includes a full 8 foot 3-wire harness, using OEM style GT150 female connector for the continental sensor (completely weather sealed), loomed in factory style protection, with a interlocking connector on the ECA end. Also includes 5 zip ties to secure the harness.

Package B - Bluetooth enabled ECA; $105.00 shipped - the same analyzer and harness as above, plus the addition of a Bluetooth radio (Android compatible only). This will allow you to view your fuel ethanol content and fuel temperature on your Android smartphone or tablet via free smartphone / tablet app I've written (available at the Google Play store), or any of the above methods. V2 of the app should be available in early 2016, which will include blend calculators and a revised interface. Perfect for MDH, Cobb or JB4 users using meth.

Add on A - digital LED display add on; $30.00 - Add a fully digital red stand alone LED readout. Can be added after the fact, and does not require JB4 or an Android device. This LED display is compatible with either of the above ECAs by simply plugging in the harness and placing it where you'd like. Shipping is free when ordered with package A or B, or $6.90 if ordered separately to the continental US. Perfect for MDH, Cobb or JB4 users using meth.

Add on B - Bluetooth module; $35.00 - For non-bluetooth analyzers shipped 12-10-15 and on. Add a bluetooth module to your non-bluetooth ECA, to upgrade to the bluetooth capability and functionality of Package B. Includes a clear heat shrink tubing and a zip tie to bundle to the ECA. Shipping is $6.90 to the continental US. Perfect for MDH, Cobb or JB4 users using meth.

PM me if you'd like to order or for international shipping rates, and I'll provide paypal info for payment.

Here is the standard ECA:

Modular connectors:

Bluetooth enabled ECA:

New 5 volt power supply:

8 foot harness with GT150 sensor connector and removable JB4 0-5v output lead with serial pin:

Add on B - Bluetooth module:

Add on A - Digital LED display:

Three simultaneous outputs (0-5v JB4, Bluetooth and digital LED) driven at once:

Here is a screenshot of JB4 mobile displaying ethanol content using JB4 pin 15:

Here's a picture of JB4 mobile next to ethanol content on the fuel gauge (gauge hijacking in JB4):

Here is a screenshot of the Bluetooth app displaying ethanol content and fuel temperature:

Harness connected to the continental sensor:

Harness run across the engine using the empty channel in the cowl wire carrier:

ECA installed and running in the DME box:

blisstik · 07-31-2015, 02:07 PM

Confused by the part that says we need to provide our own sensor?

str8shot · 07-31-2015, 02:37 PM

Quote:

Originally Posted by blisstik

Confused by the part that says we need to provide our own sensor?

They're so cheap and you can get them just about anywhere, so I figured I'd let you get your own.

I could provide an option to include one, but it'd raise the cost by the cost of the sensor. Roughly ~60 dollars.

jmb85 · 07-31-2015, 04:33 PM

This is great!

str8shot · 09-02-2015, 03:57 PM

Updated with revised pricing, and screen shot of my new dedicated app.

dreyo27 · 09-09-2015, 03:35 PM

Seems like a cool kit, and a great price. Are there any necessary adapters to attach the sensor to the fuel line?
Free bump...
And found these sensors for as little at 50$ here
http://www.ebay.com/itm/13577394-New...df71ea&vxp=mtr

str8shot · 09-10-2015, 10:00 AM

Quote:

Originally Posted by dreyo27

Seems like a cool kit, and a great price. Are there any necessary adapters to attach the sensor to the fuel line?
Free bump...
And found these sensors for as little at 50$ here
http://www.ebay.com/itm/13577394-New...df71ea&vxp=mtr

Yes, you need a replacement fuel line that adds the female fittings to install the sensor inline.

You can use one of the fuel-it sensor install kits, or I can make a one off factory fuel line.

dreyo27 · 09-14-2015, 08:41 PM

Quote:

Originally Posted by str8shot

Yes, you need a replacement fuel line that adds the female fittings to install the sensor inline.

You can use one of the fuel-it sensor install kits, or I can make a one off factory fuel line.

Can you PM me the price for that? how big is it is it? possible to ship?

ATTN · 09-14-2015, 09:43 PM

Whats the difference between this and what Fuel it is creating?

str8shot · 09-15-2015, 08:36 AM

Quote:

Originally Posted by ATTN

Whats the difference between this and what Fuel it is creating?

The biggest difference is cost - the JB4 only analyzer I'm selling is $40.95 shipped vs $129 for the fuel-it analyzer.

Also, my analyzer is upgradeable via USB. I have 4 extra leads for future expansion. This could include triggers based on content to kick on another fuel pump, etc.

Note that both my ECA and the fuel it ECA still require the sensor install kit.

I'm recommending their ES-1 installation kit, just because it's hard for me to touch it cost wise. I will still modify factory fuel lines for those that wish to keep factory appearance in one-off situations.

str8shot · 09-15-2015, 08:39 AM

Quote:

Originally Posted by dreyo27

Can you PM me the price for that? how big is it is it? possible to ship?

For an e90 - the factory fuel line is about 7 feet.

Here's a picture of one I modified for a LCI 335i with the two female fittings installed and the sensor installed between them:

I'll modify your fuel line for $20. You can either send me your existing one, or I can purchase a brand new one. You'll pay actual cost for the female fittings, the fuel line, and shipping. I'll just add $20 to the price.

str8shot · 09-25-2015, 08:23 AM

Sold a kit with the digital meter.

Came out nicely and will look good in the glove box.

Gauge in action:

MMMCOOKIES55 · 09-25-2015, 10:15 AM

Can't wait for mine

str8shot · 10-02-2015, 04:32 PM

Shipped a couple more kits in all flavors (bluetooth, JB4 only, and with the gauge).

Tried out the red gauge - it looks pretty sharp. It's going to look pretty rad behind the buyers vent:

str8shot · 10-02-2015, 04:33 PM

Quote:

Originally Posted by MMMCOOKIES335...

Can't wait for mine

You should have it Monday. The red gauge is really cool. I like it better than the blue one.

maristgrad09 · 10-02-2015, 05:14 PM

What if the person is running meth? Can the wire be plugged into another port in the dme?

str8shot · 10-02-2015, 05:43 PM

Quote:

Originally Posted by maristgrad09

What if the person is running meth? Can the wire be plugged into another port in the dme?

If you're running meth, the only option right now is the bluetooth interface, or the stand alone gauge.

Is your meth scaled 0-5v?

I'm working on a way to flip between the two - but you'd never be able to input both into JB4 unless they open up another input.

I'm also prototyping a sway to display your E content in the dash. That should be coming in the next few weeks.

dreyo27 · 10-07-2015, 03:48 PM

I will take a basic esa bluetooth and harness please. PM me your paypal info and how fast can you ship it out, thanks.

str8shot · 10-08-2015, 05:49 PM

Two more kits shipped out!

ECA with gauge, and an ECA for use with the P3 vent gauge.

Red looks sharp. Way better than blue IMO.

str8shot · 11-25-2015, 08:56 AM

Thanksgiving bump!

krommmy · 11-25-2015, 12:07 PM

I have a 335i 2007 coupe and jb4, what do I need to have those gauge read outs?

thank you

str8shot · 11-25-2015, 06:05 PM

Quote:

Originally Posted by krommmy

I have a 335i 2007 coupe and jb4, what do I need to have those gauge read outs?

thank you

If you don't have meth, you can get the basic package and run the gauges through JB4 (gauge hijacking, via JB4 mobile, or via JB4 for windows).

If you want to run JB4 as well as a gauge, I have a new one coming out shortly that will facilitate that as well.

07-31-2015, 09:29 AM	#1
str8shot Lieutenant 107 Rep 471 Posts Drives: N54 Montego Blue 135i Join Date: Mar 2012 Location: Wisco iTrader: (1)	e85 bluetooth content analyzers and installation kits! BIMMERPOST / Classifieds Asking Price: USD 20.00 Location: ✓ Will Ship Item Interest What you see here is my ethanol content analyzer (ECA) solution. This is 100% compatible with the Fuel-it brand sensor installation kits at a fraction of the cost. This will allow you to read the data stream from a standard continental flex fuel sensor and view the data in several different ways. All ECA's feature interlocking connectors, a new 5 volt power supply, are prewired for upgradeability (Bluetooth and the digital display can be added after purchase) and feature upgradeable firmware via USB. Packages are: Package A - Standard ECA; $80.00 shipped - my analyzer with a 0-5 volt output lead for use with JB4 (or any other display / ECU that uses a 0-5v input). This will display your ethanol content over pin 15 of the JB4 harness (typically used for meth flow). You can then view your ethanol content via gauge high jacking, over the JB4 mobile app, and it will be logged as well. Includes a full 8 foot 3-wire harness, using OEM style GT150 female connector for the continental sensor (completely weather sealed), loomed in factory style protection, with a interlocking connector on the ECA end. Also includes 5 zip ties to secure the harness. Package B - Bluetooth enabled ECA; $105.00 shipped - the same analyzer and harness as above, plus the addition of a Bluetooth radio (Android compatible only). This will allow you to view your fuel ethanol content and fuel temperature on your Android smartphone or tablet via free smartphone / tablet app I've written (available at the Google Play store), or any of the above methods. V2 of the app should be available in early 2016, which will include blend calculators and a revised interface. Perfect for MDH, Cobb or JB4 users using meth. Add on A - digital LED display add on; $30.00 - Add a fully digital red stand alone LED readout. Can be added after the fact, and does not require JB4 or an Android device. This LED display is compatible with either of the above ECAs by simply plugging in the harness and placing it where you'd like. Shipping is free when ordered with package A or B, or $6.90 if ordered separately to the continental US. Perfect for MDH, Cobb or JB4 users using meth. Add on B - Bluetooth module; $35.00 - For non-bluetooth analyzers shipped 12-10-15 and on. Add a bluetooth module to your non-bluetooth ECA, to upgrade to the bluetooth capability and functionality of Package B. Includes a clear heat shrink tubing and a zip tie to bundle to the ECA. Shipping is $6.90 to the continental US. Perfect for MDH, Cobb or JB4 users using meth. PM me if you'd like to order or for international shipping rates, and I'll provide paypal info for payment. Here is the standard ECA: Modular connectors: Bluetooth enabled ECA: New 5 volt power supply: 8 foot harness with GT150 sensor connector and removable JB4 0-5v output lead with serial pin: Add on B - Bluetooth module: Add on A - Digital LED display: Three simultaneous outputs (0-5v JB4, Bluetooth and digital LED) driven at once: Here is a screenshot of JB4 mobile displaying ethanol content using JB4 pin 15: Here's a picture of JB4 mobile next to ethanol content on the fuel gauge (gauge hijacking in JB4): Here is a screenshot of the Bluetooth app displaying ethanol content and fuel temperature: Harness connected to the continental sensor: Harness run across the engine using the empty channel in the cowl wire carrier: ECA installed and running in the DME box: __________________ 08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers Last edited by str8shot; 02-24-2016 at 10:05 AM..
	Appreciate 0 Tweet Quote

07-31-2015, 02:07 PM	#2
blisstik Lieutenant Colonel 151 Rep 1,677 Posts Drives: E92 Join Date: Jul 2009 Location: California iTrader: (14)	Confused by the part that says we need to provide our own sensor?
	Appreciate 1 swishersweets764.50 Quote

07-31-2015, 04:33 PM	#4
jmb85 Second Lieutenant 12 Rep 290 Posts Drives: 335i Coupe Join Date: Sep 2012 Location: Miami, FL iTrader: (4)	This is great!
	Appreciate 0 Quote

09-02-2015, 03:57 PM	#5
str8shot Lieutenant 107 Rep 471 Posts Drives: N54 Montego Blue 135i Join Date: Mar 2012 Location: Wisco iTrader: (1)	Updated with revised pricing, and screen shot of my new dedicated app. __________________ 08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
	Appreciate 0 Quote

09-09-2015, 03:35 PM	#6
dreyo27 First Lieutenant 92 Rep 322 Posts Drives: 2007 335i e92 Join Date: Aug 2015 Location: Sacramento CA iTrader: (3)	Seems like a cool kit, and a great price. Are there any necessary adapters to attach the sensor to the fuel line? Free bump... And found these sensors for as little at 50$ here http://www.ebay.com/itm/13577394-New...df71ea&vxp=mtr
	Appreciate 0 Quote

09-14-2015, 09:43 PM	#9
ATTN Major 96 Rep 1,031 Posts Drives: 335 E92 DCT Join Date: Jun 2013 Location: Sydney, Australia iTrader: (3) Garage List 2009 BMW 335i [10.00]	Whats the difference between this and what Fuel it is creating? __________________ Certified Australian
	Appreciate 0 Quote

09-25-2015, 08:23 AM	#12
str8shot Lieutenant 107 Rep 471 Posts Drives: N54 Montego Blue 135i Join Date: Mar 2012 Location: Wisco iTrader: (1)	Sold a kit with the digital meter. Came out nicely and will look good in the glove box. Gauge in action: __________________ 08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
	Appreciate 0 Quote

09-25-2015, 10:15 AM	#13
MMMCOOKIES55 Major 350 Rep 1,376 Posts Drives: '17 M3 ZCP/ '16 ATS-V Join Date: Oct 2009 Location: Apex, NC iTrader: (3)	Can't wait for mine
	Appreciate 0 Quote

10-02-2015, 04:32 PM	#14
str8shot Lieutenant 107 Rep 471 Posts Drives: N54 Montego Blue 135i Join Date: Mar 2012 Location: Wisco iTrader: (1)	Shipped a couple more kits in all flavors (bluetooth, JB4 only, and with the gauge). Tried out the red gauge - it looks pretty sharp. It's going to look pretty rad behind the buyers vent: __________________ 08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
	Appreciate 0 Quote

10-02-2015, 05:14 PM	#16
maristgrad09 Major 245 Rep 1,236 Posts Drives: Orange e92 m3 FBO+E85 Join Date: May 2010 Location: Setauket, NY iTrader: (2) Garage List 2007 335i [0.00] 2007 335i [0.00]	What if the person is running meth? Can the wire be plugged into another port in the dme? __________________ 2007 e90 335i: Single Turbo 700whp (Sold) 2009 e82 135i: Jb4 Only (Sold) 2010 e92 M3: Macht Schnell Intake, AA Pulley, IPE F1 Full Exhaust, 100% e85, RK Tunes Custom Tune (400whp)
	Appreciate 0 Quote

10-07-2015, 03:48 PM	#18
dreyo27 First Lieutenant 92 Rep 322 Posts Drives: 2007 335i e92 Join Date: Aug 2015 Location: Sacramento CA iTrader: (3)	I will take a basic esa bluetooth and harness please. PM me your paypal info and how fast can you ship it out, thanks.
	Appreciate 0 Quote

10-08-2015, 05:49 PM	#19
str8shot Lieutenant 107 Rep 471 Posts Drives: N54 Montego Blue 135i Join Date: Mar 2012 Location: Wisco iTrader: (1)	Two more kits shipped out! ECA with gauge, and an ECA for use with the P3 vent gauge. Red looks sharp. Way better than blue IMO. __________________ 08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
	Appreciate 0 Quote

11-25-2015, 08:56 AM	#20
str8shot Lieutenant 107 Rep 471 Posts Drives: N54 Montego Blue 135i Join Date: Mar 2012 Location: Wisco iTrader: (1)	Thanksgiving bump! __________________ 08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
	Appreciate 0 Quote

11-25-2015, 12:07 PM	#21
krommmy Second Lieutenant 29 Rep 296 Posts Drives: Mtreee Join Date: Aug 2015 Location: NY iTrader: (0)	I have a 335i 2007 coupe and jb4, what do I need to have those gauge read outs? thank you
	Appreciate 0 Quote