|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
[DIY] Electric Power Steering Conversion
|
|
01-18-2024, 12:25 AM | #23 |
Enlisted Member
25
Rep 43
Posts |
Even without coding EPS should work. If coding was right, check in Inpa if you can connect with EPS module. If not, check your CAN, and power supply wiring if you did everything right. If nothing works, there is probability that EPS module is faulty.
|
Appreciate
0
|
01-18-2024, 05:42 AM | #25 |
Enlisted Member
25
Rep 43
Posts |
Check if everything is alright with power supply (maybe there is power missing - just loud thinking), even coding will not resolve heavy steering. Last thing coming to my mind is broken rack - from mechanical side. What year is your car? Maybe there is something going with activating FSC codes?
|
Appreciate
0
|
01-19-2024, 06:35 PM | #29 |
Enlisted Member
25
Rep 43
Posts |
Maybe check the coding year, because I see that you have 0910, I see also that you have CIC installed, I do have it also, and I'm running 0909 without issues, maybe that is the case?
|
Appreciate
0
|
02-12-2024, 07:52 PM | #32 |
Registered
0
Rep 1
Posts |
Hi, i have been wanting to solve the heavy steering issue on my e46 for a long while. do you by any chance know whether the conversion will work on an e46 especially the coding part? or if will it work if i juct connect the power supply and the green wire to ignition (as from what i found that is the ignition wire)?
Thanks |
Appreciate
0
|
02-14-2024, 03:37 AM | #33 |
Enlisted Member
25
Rep 43
Posts |
I don't think that this will work due to different mechanicals of e46 and different electronics - EPS is working with plenty of other devices like DSC or SZL, and without communication between modules nothing will work probably.
|
Appreciate
0
|
02-19-2024, 10:55 AM | #34 | |
Registered
0
Rep 2
Posts |
Quote:
Can this conversion be done on e61 525d (2005)? hate my hydraulic power steering |
|
Appreciate
0
|
04-02-2024, 12:47 AM | #35 |
Registered
0
Rep 1
Posts |
Hi Ivan, quick question What belt did you use to run the pulleys after removing power steering rack and pump? Or did you keep the pump in place? If so how do you keep it so the pump stays lubricated? Thanks
|
Appreciate
0
|
04-22-2024, 01:26 PM | #36 |
Enlisted Member
25
Rep 43
Posts |
I recommend to check on realoem or something similar what belt was used on your car, when it was equipped with CO2 package. If you need help, reach me out!
|
Appreciate
0
|
05-06-2024, 10:08 AM | #37 | |
Private
9
Rep 66
Posts |
Quote:
How did you setup the Pulley and Belt Drive ? Did you removed the Power Steering Pump ? And how does your belt drive look now ? |
|
Appreciate
0
|
Bookmarks |
|
|