|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
MHD 2+ log help
|
|
02-10-2024, 08:34 PM | #1 |
New Member
3
Rep 29
Posts |
MHD 2+ log help
Hey guys, wondering if someone can look at my log, I picked this car up a while ago and am just trying to work out some kinks and determine if shes healthy or not. Im new to reading logs so any help would be much appreciated.
Its on v1.84 91 oct All new aluminum piping VRSF 7.5 in intercooler Colder plugs Catless and straight piped Precision 2.5 lpfp This log is from MHD only, i was running it with a jb4 bef but my car was not happpy with that setup, always throwing codes, sputtering, dying. With MHD only it runs much better. Anyone experience this before and whats your preffered setup? https://datazap.me/u/sleeper90/log-1...-26-27&mark=69 This log is from my prior MHD BEF setup https://datazap.me/u/sleeper90/log-1...25-26-27-28-29 Im new to logs but the car doesnt feel like it %100, if you guys see anything id appreciate the input. Thanks! Last edited by sleeeper90; 02-10-2024 at 08:59 PM.. |
02-13-2024, 10:28 AM | #2 |
First Lieutenant
307
Rep 394
Posts |
logs look fine.
The heavy enrichment on throttle input is normal-ish. MHD probably does this to prevent tip-in knock. The boost spike when letting off is also pretty typical if you don't have an aftermarket BPV/BOV. |
Appreciate
0
|
Bookmarks |
|
|