*OFFICIAL Michigan Chat & Meet Thread*

NoGuru · 05-31-2018, 09:10 AM

Quote:

Originally Posted by ph335

Looking to get walnut blast done in sterling heights area. Anyone know a guy on this side of town

Curt takes a while to get back but I hear he does really good work.
PM him http://www.e90post.com/forums/showthread.php?t=1055194

markhamr · 06-07-2018, 02:31 PM

Need some help/advice guys. On my drive to work this morning (after a few slow miles and before I got on the highway), I got a yellow light warning today warning "engine hot, drive moderately". This was the second time in a week I got the warning after a few slow miles after a cold start. Also, this may or may not be related, but I've noticed the past few times when I eject the key that something has continued to run for about 10 seconds afterwards.

Anyone able to help me scan error codes? I work in Southfield and live in Royal Oak. I ordered the Schwaben scan tool from ECS this morning, but won't have it for several days. I want to see if the codes will tell me what it is (from my research, likely thermostat or water pump).

Any other recommendations on how I should approach? I'm going to check the coolant level before I leave work today. Also, I've researched DIY for thermostat/water pump and considering this option (~$500 parts) vs dealership or indy >$1k.

WayneK · 06-07-2018, 03:15 PM

Quote:

Originally Posted by WayneK

Anyone in S.E. Michigan able to help code a battery from flooded to AGM and change the AH? I picked up a Foxwell scan tool since it reportedly could do this but I believe it was bad information.

The e93 is out of the garage for the spring/summer and still need to register the new battery. I was going to buy icarly but see they now charge annually which is annoying. Anyone nearby that could help out? I work in northville/plymouth - live bloomfield twp.

Thanks!

WayneK · 06-07-2018, 03:19 PM

Quote:

Originally Posted by markhamr

Any other recommendations on how I should approach? I'm going to check the coolant level before I leave work today. Also, I've researched DIY for thermostat/water pump and considering this option (~$500 parts) vs dealership or indy >$1k.

Sure sounds like its the water pump... I'd check your coolant level asap. DIY isn't that bad but can take a little time (I've only done it once).

markhamr · 06-07-2018, 07:01 PM

Quote:

Originally Posted by WayneK

Quote:

Originally Posted by markhamr

Any other recommendations on how I should approach? I'm going to check the coolant level before I leave work today. Also, I've researched DIY for thermostat/water pump and considering this option (~$500 parts) vs dealership or indy >$1k.

Sure sounds like its the water pump... I'd check your coolant level asap. DIY isn't that bad but can take a little time (I've only done it once).

Thanks. Checked the coolant level and it's just about up to the "max" level on the yellow marker (i had to research how to read, as i expected something that floated rather than being fixed within the reservoir). So I'll drive home slow tonight and see if i can borrow a car until i get the code reader

C2YT · 06-08-2018, 07:29 AM

Anyone going to the BMW Cars and Coffee in the morning at Erhard BMW?

NoGuru · 06-08-2018, 08:37 AM

Quote:

Originally Posted by C2YT

Anyone going to the BMW Cars and Coffee in the morning at Erhard BMW?

I might, but I really need the time to install Flex Fuel and diff brace.
Well see how my night goes.

C2YT · 06-13-2018, 09:08 AM

Was a little wet, but still a cool event. Very happy I went! Where are all of you located? I work at Tenneco in Monroe, 99% sure I'm the only e9x in the area...

NoGuru · 06-13-2018, 09:40 AM

Quote:

Originally Posted by C2YT

Was a little wet, but still a cool event. Very happy I went! Where are all of you located? I work at Tenneco in Monroe, 99% sure I'm the only e9x in the area...

Yeah, I got stuck doing the Flex Fuel install. She pulls like a freight train now.

I am in Waterford.

UMich_335i · 06-13-2018, 10:41 AM

I work at Ford in Dearborn but live up in Royal Oak.

jessE91hernandez · 06-13-2018, 02:09 PM

Hey everyone. New to the forum. I'm in the Grand Rapids and would like to get out to some shows. I just discovered this MI forum, and glad that I did! Anyone have suggestions of where I should go to have coilovers installed? I've never done real suspension work before and don't exactly have the time or tools to do it..

2009 E91 xdrive

4 Doors · 06-13-2018, 03:56 PM

Quote:

Originally Posted by NoGuru

Quote:

Originally Posted by C2YT

Was a little wet, but still a cool event. Very happy I went! Where are all of you located? I work at Tenneco in Monroe, 99% sure I'm the only e9x in the area...

Yeah, I got stuck doing the Flex Fuel install. She pulls like a freight train now.

I am in Waterford.

I used to live in Waterford. Out in KZoo now. Also to above, let me know where you are thinking of going for coilovers as I would love to do mine also.

NoGuru · 06-14-2018, 07:23 AM

Going to UCM's 2nd Annual Kensington Car show this weekend, Saturday from 1 to 6pm.
Let me know if you want to caravan or meet there?

2240 W Buno Rd, Milford, MI, 48380

Blaster400 · 06-16-2018, 11:32 AM

Anyone local interested in a nice drag radial setup?

Apex ARC-8 17x9.5 ET35 wheels (Anthracite) with Hoosier 275/40/17 drag radials.

Like new condition. $500.

4 Doors · 06-16-2018, 11:43 PM

Quote:

Originally Posted by Blaster400

Anyone local interested in a nice drag radial setup?

Apex ARC-8 17x9.5 ET35 wheels (Anthracite) with Hoosier 275/40/17 drag radials.

Like new condition. $500.

This is a square setup, correct? Also, these are relatively wide and do not fit stock sport suspension, correct? I would prefer to put my Pilot Sports on the wheels, but don't think they would fit.

Blaster400 · 06-17-2018, 07:36 AM

Quote:

Originally Posted by 4 Doors

This is a square setup, correct? Also, these are relatively wide and do not fit stock sport suspension, correct? I would prefer to put my Pilot Sports on the wheels, but don't think they would fit.

It’s only two wheels/tires. It’s a perfect setup for drag racing. The Hoosier drag radials make a huge difference. Just swap your DD rear wheels/tires for these and you can launch hard.

They fit stock suspension no problem.

4 Doors · 06-17-2018, 08:46 AM

Quote:

Originally Posted by Blaster400

Quote:

Originally Posted by 4 Doors

This is a square setup, correct? Also, these are relatively wide and do not fit stock sport suspension, correct? I would prefer to put my Pilot Sports on the wheels, but don't think they would fit.

It's only two wheels/tires. It's a perfect setup for drag racing. The Hoosier drag radials make a huge difference. Just swap your DD rear wheels/tires for these and you can launch hard.

They fit stock suspension no problem.

Sorry, I overlooked the drag setup portion.

mashimarho · 06-18-2018, 03:27 AM

Quote:

Originally Posted by Blaster400

Anyone local interested in a nice drag radial setup?

Apex ARC-8 17x9.5 ET35 wheels (Anthracite) with Hoosier 275/40/17 drag radials.

Like new condition. $500.

I heard you moved on.... Is this true?

Blaster400 · 06-20-2018, 02:18 PM

Quote:

Originally Posted by mashimarho

I heard you moved on.... Is this true?

Sad but true. It was a good 11 year run but it’s finally time to move on. Sean it looks like you are the last holdout of original owners.

I’m still exploring options for my next ride. Stay tuned...

mashimarho · 06-21-2018, 12:35 AM

Quote:

Originally Posted by Blaster400

Sad but true. It was a good 11 year run but it’s finally time to move on. Sean it looks like you are the last holdout of original owners.

I’m still exploring options for my next ride. Stay tuned...

This seems to be quite true. Very few of us remain. I'm next... Who knows what's around the corner.

I can't wait to see what's in store for you next!

NoGuru · 06-28-2018, 07:13 AM

Heading to Cars and Coffee and M1 this Saturday. If anyone wants to meet just before and head in, let me know?

NoGuru · 07-17-2018, 02:42 PM

Saw a black 335is in Pontiac yesterday. Anyone on here?

06-07-2018, 02:31 PM	#2620
markhamr New Member 0 Rep 18 Posts Drives: 2011 e90 335i xdrive m sport Join Date: Feb 2018 Location: Royal Oak, Michigan iTrader: (0)	Need some help/advice guys. On my drive to work this morning (after a few slow miles and before I got on the highway), I got a yellow light warning today warning "engine hot, drive moderately". This was the second time in a week I got the warning after a few slow miles after a cold start. Also, this may or may not be related, but I've noticed the past few times when I eject the key that something has continued to run for about 10 seconds afterwards. Anyone able to help me scan error codes? I work in Southfield and live in Royal Oak. I ordered the Schwaben scan tool from ECS this morning, but won't have it for several days. I want to see if the codes will tell me what it is (from my research, likely thermostat or water pump). Any other recommendations on how I should approach? I'm going to check the coolant level before I leave work today. Also, I've researched DIY for thermostat/water pump and considering this option (~$500 parts) vs dealership or indy >$1k.
	Appreciate 0 Quote

06-08-2018, 07:29 AM	#2624
C2YT Private First Class 68 Rep 159 Posts Drives: 2011 e90 335i Join Date: Dec 2017 Location: Taylor, MI iTrader: (0)	Anyone going to the BMW Cars and Coffee in the morning at Erhard BMW?
	Appreciate 0 Quote

06-13-2018, 09:08 AM	#2626
C2YT Private First Class 68 Rep 159 Posts Drives: 2011 e90 335i Join Date: Dec 2017 Location: Taylor, MI iTrader: (0)	Was a little wet, but still a cool event. Very happy I went! Where are all of you located? I work at Tenneco in Monroe, 99% sure I'm the only e9x in the area...
	Appreciate 0 Quote

06-13-2018, 10:41 AM	#2628
UMich_335i Lieutenant 25 Rep 414 Posts Drives: 2009 e90 335i Join Date: Aug 2013 Location: Atlanta, GA iTrader: (0) Garage List 2009 BMW 335i [0.00]	I work at Ford in Dearborn but live up in Royal Oak. __________________ 2009 e90 335i \| AT \| AG M590 \| Conti DW \| KW V1 \| Lux \| Akebono e50 PTF Protune \| Cobb FMIC \| aFe DCI \| VRSF DPs \| ER CP \| Tial BOV \| Alpina Flash \| Fuel-It Stg1 \| RB PCV \| Cobb Exhaust
	Appreciate 0 Quote

06-13-2018, 02:09 PM	#2629
jessE91hernandez New Member 8 Rep 11 Posts Drives: 2009 328i xdrive Touring Join Date: Feb 2018 Location: Grand Rapids, MI iTrader: (0)	Hey everyone. New to the forum. I'm in the Grand Rapids and would like to get out to some shows. I just discovered this MI forum, and glad that I did! Anyone have suggestions of where I should go to have coilovers installed? I've never done real suspension work before and don't exactly have the time or tools to do it.. 2009 E91 xdrive Attached Images
	Appreciate 0 Quote

06-14-2018, 07:23 AM	#2631
NoGuru Major 772 Rep 1,418 Posts Drives: 335is Join Date: Apr 2017 Location: MI iTrader: (0) Garage List 2021 Chevy Silverad ... [0.00] 2002 Jeep Cherokee [0.00] 2014 CTS [0.00] 2011 335is [0.00]	Going to UCM's 2nd Annual Kensington Car show this weekend, Saturday from 1 to 6pm. Let me know if you want to caravan or meet there? 2240 W Buno Rd, Milford, MI, 48380 __________________ 2011 335is DCT BQ Tuning / BMS CAI / VRSF kittyless DP's / Synapse BOV and charge pipe / 7" VRSF Race FMIC / Walbro 535 and 450 on BMP4 / E90 tune / Diff Brace / PR Coils / Relocation Inlets / DAW Stage3+ Turbos / MMP port injection / xHP Stage 3 / FPR and -6 fuel lines
	Appreciate 0 Quote

06-16-2018, 11:32 AM	#2632
Blaster400 Captain 127 Rep 865 Posts Drives: BMW X3 35i, Porsche Macan S Join Date: Jul 2012 Location: Scottsdale AZ iTrader: (3) Garage List 2018 Porsche Macan S [0.00] 2012 BMW X3 35i [0.00]	Anyone local interested in a nice drag radial setup? Apex ARC-8 17x9.5 ET35 wheels (Anthracite) with Hoosier 275/40/17 drag radials. Like new condition. $500. __________________ MOTIV 750 ST \| MOTIV PI \| 100% E85 \| Fuel-it Stage 4 LPFP \| MOTIV Boost Box + MHD Protune \| Quaife \| Öhlins \| Brembo \| Akrapovic
	Appreciate 0 Quote

06-28-2018, 07:13 AM	#2639
NoGuru Major 772 Rep 1,418 Posts Drives: 335is Join Date: Apr 2017 Location: MI iTrader: (0) Garage List 2021 Chevy Silverad ... [0.00] 2002 Jeep Cherokee [0.00] 2014 CTS [0.00] 2011 335is [0.00]	Heading to Cars and Coffee and M1 this Saturday. If anyone wants to meet just before and head in, let me know? __________________ 2011 335is DCT BQ Tuning / BMS CAI / VRSF kittyless DP's / Synapse BOV and charge pipe / 7" VRSF Race FMIC / Walbro 535 and 450 on BMP4 / E90 tune / Diff Brace / PR Coils / Relocation Inlets / DAW Stage3+ Turbos / MMP port injection / xHP Stage 3 / FPR and -6 fuel lines
	Appreciate 0 Quote

07-17-2018, 02:42 PM	#2640
NoGuru Major 772 Rep 1,418 Posts Drives: 335is Join Date: Apr 2017 Location: MI iTrader: (0) Garage List 2021 Chevy Silverad ... [0.00] 2002 Jeep Cherokee [0.00] 2014 CTS [0.00] 2011 335is [0.00]	Saw a black 335is in Pontiac yesterday. Anyone on here? __________________ 2011 335is DCT BQ Tuning / BMS CAI / VRSF kittyless DP's / Synapse BOV and charge pipe / 7" VRSF Race FMIC / Walbro 535 and 450 on BMP4 / E90 tune / Diff Brace / PR Coils / Relocation Inlets / DAW Stage3+ Turbos / MMP port injection / xHP Stage 3 / FPR and -6 fuel lines
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search