[warlockuy]

Help to activate usb menu in radio professional 2011

Hello I retrofit mulf2hi and radio professional 2011.
I have bluetooth calls working, the new gongs, the aux works perfect.
But I couldn't get the usb menu to appear on the radio.
He already has $6fl loaded in vo but it didn't appear.

My car is from 2006.
I saw that it could be that you have to change the build date. but i'm not sure since all the rest works.
Could someone give me a help?
Thanks

[ctuna]

http://www.**************/showthread...ighlight=mulf2

http://www.e90post.com/forums/showthread.php?t=1126467

http://www.e90post.com/forums/showthread.php?t=1181654

(ttp://www.**************/showthread.php?11367-E61-2006-530i-6FL-USB-Aud)io-Retrofit-Success&highlight=mulf2) from website b m w c o d i n g

Yes you have change the build date while coding 6FL in .

[warlockuy]

Originally Posted by ctuna

http://www.**************/showthread...ighlight=mulf2

http://www.e90post.com/forums/showthread.php?t=1126467

http://www.e90post.com/forums/showthread.php?t=1181654

(ttp://www.**************/showthread.php?11367-E61-2006-530i-6FL-USB-Aud)io-Retrofit-Success&highlight=mulf2) from website b m w c o d i n g

Yes you have change the build date while coding 6FL in .

I saw in some forum treads, that this could cause me to lose the aux? Or nothing should happen with the change of the build date and activate the usb?
I would like to keep all the functionalities.

And the question is if this from the build date, shouldn't mulf2 not work? because it is only the usb that I can not get it to work
Thank you

[ctuna]

If you read the threads there is no Mulf 2 hi offered in the 2006 year that causes
it not to accept programming for the Mulf 2 Hi . The explications are in those threads
and also on the coding sub forum if you read and look for them .
Adding this stuff has been done before.

To add to the confusion there where some Euro CD73 radios that came with USB
built into the Radio.

[warlockuy]

Originally Posted by ctuna

If you read the threads there is no Mulf 2 hi offered in the 2006 year that causes
it not to accept programming for the Mulf 2 Hi . The explications are in those threads
and also on the coding sub forum if you read and look for them .
Adding this stuff has been done before.

To add to the confusion there where some Euro CD73 radios that came with USB
built into the Radio.

I only ask one more please, if the communication was not being made with the mulfhi2, why does the bluetooth work?

I don't ask you to tell me the steps, only if you explain that to me so I can understand a little more.
It is not the same to make it work with a recipe, than to understand it and for future retrofits to have a clearer reason why.

If mulf2hi does not communicate, how can it be able to download its configuration with ncs expert?

Maybe what happens is communicated but does not show all its configuration until I put the new build date?

I clarify it is to learn and understand, I would greatly appreciate it if you take a few minutes to help me learn.

I saw your links and a lot more from other forums and places, and all of them are similar step by step, none of them explain things to you.

These data would not be from mulf2? If you don't communicate where you are taking them from?

Atach 2rad and mulf2
very very thanks

[ctuna]

If you read both those files it show usb is disabled in both the the radio and mulf.
Do a text search for usb and in all instances where it comes up it says nicht acktiv.

You can try to edit and rewrite those files just keep a copy of the originals or
you can try to add 6FL to the Vo then program the two modules.

(after changing the production date )
Mulf will not communicate most likely due to the production date.
http://www.e90post.com/forums/showthread.php?t=687463


DPD
wert_01
TEL_BUCH_ASYNC_CONTROL
most_control_channel
UNICODE
nicht_aktiv
A2DP_EIN_AUS
nicht_aktiv
API_EIN_AUS
nicht_aktiv
API_IPOD_COM_TYPE
ipod_two_wire_seriel
API_IPOD_EIN_AUS
nicht_aktiv
API_MTP_EIN_AUS
nicht_aktiv
API_TWO_USB
nicht_aktiv
API_USB_EIN_AUS
nicht_aktiv
BT_EIN_AUS
aktiv


RAD22_CROSSOVER_B
e90_stereo
M_GROUP_C_32
l7_dspl_off_hk_amp
RAD22_MDRIVE
nicht_aktiv
SPRACHE_SVS
spanisch
SECOND_USB
nicht_aktiv
SDARS_DTC
exbox

You could have a Radio that has built in bluetooth and usb or you could have a
TCU I can't tell what your hardware is and it's different in Europe.

http://www.e90post.com/forums/showthread.php?t=687463

[warlockuy]

Thank you so much.
What I see is that I don't have the same lines as other people.
This may be because of the build date.
I can change that menu without problems, so I was wondering if they really would not be commenting, change the language of the call assistant and other things that I found.
But I can't find other usb lines.
Those are the api ones, which I think are not the ones to change to aktiv.
And the usb one is for a second usb.
The radio is an 11-11 from a 328 from the USA.
I bought it on ebay
I leave an attached image
Today I leave the car in the workshop, it's time to do the distribution, and some mechanical things.

Then I'll look at the build date issue.
As I explained above I am new, it gives me a bit of a thing to break everything.
But I will follow the step by step to cheat the date of the car.
Thank you.

[ctuna]

You should be able to read all the modules with Inpa Functional jobs F3 and F4

No idea where MVD is you should at least identify your country as it makes
a difference in the car configurations .

To many variations to have exact knowledge on every module.
But the year and the sound system and head unit should be identified
at a minimum.

If you notice it says BT aktiv and the two usb lines are not .
I would just change those usb lines to aktiv first.

[warlockuy]

Originally Posted by ctuna

You should be able to read all the modules with Inpa Functional jobs F3 and F4

No idea where MVD is you should at least identify your country as it makes
a difference in the car configurations .

To many variations to have exact knowledge on every module.
But the year and the sound system and head unit should be identified
at a minimum.

If you notice it says BT aktiv and the two usb lines are not .
I would just change those usb lines to aktiv first.

I am from Uruguay, mvd is Montevideo


My car default code multimedia

644 Prep. For. Mob. Ph. Bluet. Interf.
645 645 Radio Control Us
663 663 Radio Bmw Professional
694 694 Preparation For Cd Changer

When I bought it, the mulf was burned, that's why I bought the mulf2 hi

In the modules you can see the ulf2 hi
I left it attached.
I don't see a usb aktiv
only those that hit him previously
that's why it seems weird to me.

Now it is in the workshop, when they return it to me
I will set the builddate and reload the $6fl
Let's see if it appears

API_TWO_USB
nicht_aktiv
API_USB_EIN_AUS
nicht_aktiv

SECOND_USB
nicht_aktiv



no see "USB aktiv"

Thanks

[ctuna]

Do you know any German ? nicht = not and aktiv = active not active = turned off.
So if you carefully remove the the nicht you have aktiv = turned on .
If you have anything with the term nicht aktiv is turned off.


ULF2 hi is the mulf 2 hi so the car see's it. Line 55 in your diag printout.
Those usb entry's came right out of the files you sent.

Open them with a text editor.

Use a search function with usb or just scool throuth the files till you find
the entry's

I assume those files where from your car.

You could try just making the usb lines active in both the radio and mulf first.
that might work and you wouldn't have to mess with the production date.

Then use ncsexpert as described in coding section to edit and save to man files.
Make backups of your initial trace and man files . Just for the radio and the mulf

Additionally the wire harness may need to be modified.

https://www.e90post.com/forums/showthread.php?t=1582007

Please read the entire above thread.

[warlockuy]

Originally Posted by ctuna

Do you know any German ? nicht = not and aktiv = active not active = turned off.
So if you carefully remove the the nicht you have aktiv = turned on .
If you have anything with the term nicht aktiv is turned off.


ULF2 hi is the mulf 2 hi so the car see's it. Line 55 in your diag printout.
Those usb entry's came right out of the files you sent.

Open them with a text editor.

Use a search function with usb or just scool throuth the files till you find
the entry's

I assume those files where from your car.

You could try just making the usb lines active in both the radio and mulf first.
that might work and you wouldn't have to mess with the production date.

Then use ncsexpert as described in coding section to edit and save to man files.
Make backups of your initial trace and man files . Just for the radio and the mulf

Additionally the wire harness may need to be modified.

https://www.e90post.com/forums/showthread.php?t=1582007

Please read the entire above thread.

My English is translate.
sorry

The lines that I have to pass to you, no matter German or English, are not the ones to activate the USB.

USB_RAD2 AKTIV should appear or not

It doesn't appear on my list.
It only appears to activate the second usb.
And activate the programming api.

They are not the correct lines to activate it.

API_TWO_USB
nicht_aktiv
API_USB_EIN_AUS
nicht_aktiv

SECOND_USB
nicht_aktiv

The same when they give it to me I change them but they are not the ones that I should activate according to the 100 forums that I read.

the one that should appear in the mulf2 is

USB_RAD2

like the following example.
Maybe I put it in the file and everything explodes hahaha

WASCHEN_WENN_HS_AUF
active
WISCHEN_WENN_HK_AUF
active
WISCHEN_WENN_HS_AUF
active
KMK_ZUSCHALTSCHWELLE
niedrig
USB_RAD2
active
IGR_CODIERUNG_0A
active
IGR_HERSTELLER_0A
active
TWO_MICROPHONES_ULF2
wert_01
C09_ASL
wert_00

[ctuna]

I have never done this change myself .
And I tried to help you but you are not being helpful at all.
You don't seem to understand much about BMW programming
and I understand just enough to get the things done that I need
done.
In programming you cannot just put in any word you want and
expect it to do what you want . It only understands limited and
exact syntax. Like if you spell active it will not understand that
if you spell activ instedead of the German aktiv used by BMW it
won't understand that.
Sorry if you can't understand English but you will have to understand
English German and quirks of programming languages to get
stuff done correctly .
I have already spent more time than I wanted to trying to help you
you are going to have to get through the rest of this by doing
your self learning.

[warlockuy]

Originally Posted by ctuna

I have never done this change myself .
And I tried to help you but you are not being helpful at all.
You don't seem to understand much about BMW programming
and I understand just enough to get the things done that I need
done.
In programming you cannot just put in any word you want and
expect it to do what you want . It only understands limited and
exact syntax. Like if you spell active it will not understand that
if you spell activ instedead of the German aktiv used by BMW it
won't understand that.
Sorry if you can't understand English but you will have to understand
English German and quirks of programming languages to get
stuff done correctly .
I have already spent more time than I wanted to trying to help you
you are going to have to get through the rest of this by doing
your self learning.

The one who is not understanding is you
THERE IS NO LINE that should say usb_rad2
In my file.
It is not aktiv or activ
That line is not in my file
There are the ones that I put in the text

The line that should be in that file according to that of the rest of the world is

USB_RAD2

in my file does not exist

I already know that it is in German or English what you like.
But what you do not understand is that the line to activate does not appear

The ones that I pass you are not, I already did it.
Thank you so much

[ctuna]

Then you have the wrong files or they are not compatible with your hardware.
Or a combination of the two.
You should take this to the coding subforum
Also NCSDummy may help you do the changes to the files without syntax error's

[warlockuy]

Originally Posted by ctuna

Then you have the wrong files or they are not compatible with your hardware.
Or a combination of the two.

That's a possibility, maybe over the weekend I'm going to put the buildate mask on it to see if it appears, the same thing happens in a Russian forum and when putting on the mask the option appeared