[wrrush]

ok so my windows were sticking down in the rear doors both of them. so i replaced both of them, did the 30 seconds up and the 30 seconds down and it worked for 48 hours then the windows stuck down again. they go up for 2 mm and then stick back down

a window warning emblem flashed on the dash but nothing i can see in my carly diagnostics as a code. after the emblem turned on i could get the windows back up but they would go up every 2 inches and stop. so i have just left them up

i have a 2007 335xi e90 with 120k miles on it. im just frustrated bc i like all my windows to work. thank you in advance for any help

[Joe@TopGearSolutions]

Does this happen with driver and rear switches?

[wrrush]

yes this happens with both windows in the back. drivers side and passenger side. thats why i replaced both regulators

[Joe@TopGearSolutions]

Originally Posted by wrrush

yes this happens with both windows in the back. drivers side and passenger side. thats why i replaced both regulators

What I meant does this happen whether you use the switch in the back or on the drivers door?

You could try using INPA for the windows to relearn the travel.

[wrrush]

Oh yes, it does the same thing whether I am using the button on the drivers door, or the actual windows door switch itself, I thought the same thing that maybe it was the switches, I will give INPA a try thank you