Project Daft 335 | WTCC Widebody Time Attack Build Thread

Aus335iguy · 03-29-2019, 03:44 PM

Quote:

Originally Posted by sirdaft1

Quote:

Originally Posted by Aus335iguy

This getting out of hand now mate........just the way I like things

Nothing to see here, just a FBO 335

Just DCI's, Downpipes, Cooler and a tune huh?

:

sirdaft1 · 03-29-2019, 09:43 PM

Quote:

Originally Posted by Aus335iguy

Just DCI's, Downpipes, Cooler and a tune huh?

:

Just a JB4!

sirdaft1 · 03-29-2019, 09:57 PM

Quote:

Originally Posted by mrnuke

sirdaft1 are you able to get a bit more pics of the front bumper bar/custom radiator housing/support please? Just bought a wrecked e92 n52 and looking at ideas for mounting custom rad/oil cooler and this solution looks interesting how its all tied in. Can't quite see if the radiator mount is welded to the frame horns or if it is just off the custom bumper bar?

The custom mounts are tied into the front of the frame rails making them completely removable. Here are a few more pics of the setup...

mrnuke · 04-01-2019, 01:54 PM

Quote:

Originally Posted by sirdaft1

The custom mounts are tied into the front of the frame rails making them completely removable. Here are a few more pics of the setup...

Thank you VERY much!

sirdaft1 · 04-01-2019, 09:29 PM

Quote:

Originally Posted by mrnuke

Thank you VERY much!

You’re welcome! Hope it’s helpful!

ajsmithvmi · 04-26-2019, 10:26 AM

Did you end up driving last weekend at Autobahn?

berns · 10-21-2019, 11:48 AM

Any updates on this thing?

sirdaft1 · 10-21-2019, 11:38 PM

Quote:

Originally Posted by berns

Any updates on this thing?

Still VERY alive and well! This forum has thinned out over time due to FB and IG... but most updates I provide are on IG. TLDR: pushed hard to have her ready by start of season. Build list way too long for timeline. Shop got swamped with race season. Pushed build back to off season which is now right around the corner. Will be complete this offseason and expect to be back on track the start of next year.

We have amassed a few more folks involved and a few more fun parts since last update. I’ll work on adding more details on these shortly!

ajsmithvmi · 10-22-2019, 10:07 AM

What's your IG ?

sirdaft1 · 10-26-2019, 01:01 PM

Quote:

Originally Posted by ajsmithvmi

What's your IG ?

@Daft335

And since it’s been a while since I’ve provided an update... picked up some fresh suspension. JRZ 3 Way Motorsports Series 12 dampers w/ Staubli quick disconnect fittings.

And if you’re wondering about the brand new MCS’s that we hadn’t even run yet (proper question!), those were valved for a non to low aero setup/softer spring rate. But since we’ll be running all the downforces, these are valved to run a much stiffer spring and lots of downforce. That said the MCS’s + Eibach springs are for sale here.

Some JRZ eye candy...

Cloud9blue · 12-27-2019, 10:13 PM

Haven't been active on the forums for a while, but rather disappointed to see this still hasn't roll out of the shop yet. What's the timeline you guys are working with now?

sirdaft1 · 05-08-2020, 09:41 PM

Hey all! I haven't been active on this forum in a long time as it seems most folks have moved over to FB groups. However I miss the forum feel. That said, for those who are still active on here... after nearly 3 years of being built... she's 99.76848484% complete! Just fired her up and revved her for the first time last night!

Disregard ugly wheel mode... she has some fresh E88's ready to go on when she rolls out of the shop. I'm not sure where I last left off but we have her built to run full aero - an AJ Hartman CF rear diffuser with vented rear wheels, AJ Hartman rear wing and a Klaus Composites front splitter. We also installed the 3-way JRZ Motorsport suspension, a sidepiped oval exhaust to make clearance for the custom driveshaft/reduce heat for the eventual flat bottom flooring, installed the AiM dash + GPS unit, custom aluminum dash, Sparco Circuit II halo race seat, safety netting & padding, finished the completely slimmed down wiring harness (which was a MAJOR project... in hindsight, would have been easier to convert to standalone), custom mounted 335d coolant tank relocation, buttoned up of the SpeedTech ST kit with custom Vibrant clamped plumbing, finished the install of the tubular front end with custom ducting... and I'm sure plenty more.

And aside from a few tiny items, the remaining things on the list are to order a custom driveshaft from DSS to fit the M3 DCT 3.15 LSD conversion, uprights for the wing, alignment/corner balance, dyno, code out any of the wonky factory nannies and get her dialed in on track. The bummer is... after all this time... it doesn't look like any of the tracks will be open due to this lockdown!

But I did just get an email from MVP about an early August open trackday at Autobahn.... **GASP**

sirdaft1 · 05-08-2020, 10:26 PM

And a few photos from the other night!

Aus335iguy · 05-10-2020, 04:49 AM

That thing is off it's head!
Nicely done mate

PORTMOODY · 05-10-2020, 05:28 AM

what does it weigh?

GORDON.M3 · 05-12-2020, 10:18 PM

Crazy build, the amount of custom work and fab that has gone into this project is amazing.

Well done.

sirdaft1 · 05-12-2020, 10:30 PM

Quote:

Originally Posted by Aus335iguy

That thing is off it's head!
Nicely done mate

LOL thanks brother!

Quote:

Originally Posted by PORTMOODY

what does it weigh?

We haven’t weighed it yet... we have some idea of what to expect... but will find out soon

Quote:

Originally Posted by GORDON.M3

Crazy build, the amount of custom work and fab that has gone into this project is amazing.

Well done.

Thanks man, appreciated. Definitely a labor of love that’s not for the faint of heart!

Also... I did a stop by the shop tonight and fired her up again. Sweet Moses.. I don’t think the sound of this single turbo side pipe will ever get old!

Aus335iguy · 05-13-2020, 05:22 AM

Clearly a street car with emissions and noise compliance in mind

:

beanster64 · 05-27-2020, 02:31 AM

very comprehensive build, well done... was there a reason for not choosing a coupe as a shell instead of a 4 door model?

sirdaft1 · 05-27-2020, 06:01 PM

Quote:

Originally Posted by beanster64

very comprehensive build, well done... was there a reason for not choosing a coupe as a shell instead of a 4 door model?

Thanks! Supposedly there’s more rigidity in the 4 door version, but with this level of cage it really doesn’t matter. Ultimately it was personal preference. Love the proportions of the e90.

Compactive · 07-20-2020, 11:07 AM

DM sent

sirdaft1 · 07-25-2020, 01:00 AM

Quote:

Originally Posted by Compactive

DM sent

Just shot you back a DM

04-26-2019, 10:26 AM	#358
ajsmithvmi Professional Hack 96 Rep 379 Posts Drives: 2009 135i Join Date: Dec 2017 Location: St Louis iTrader: (5)	Did you end up driving last weekend at Autobahn? __________________ MCS 1WNR Dampers \| Ground Control Camber Plates \| E90 M3 front control arms\| E90 M3 front tension arm w/ Turner monoball bearings \| E90 M3 Steering rack conversion \| SPL Adjustable Outer Tie Rod Ends \| M3 Rear Camber Arms \| SPL Adjustable Rear Toe Arms \| M3 Front Caliper Conversion \| 275/35/18 Toyo RA1s \| 18x9.5ET22 Apex EC-7’s \| mFactory LSD \| AIM EVO4S with GS Dash \| New for 2020: LS1 Swap!
	Appreciate 0 Quote

10-21-2019, 11:48 AM	#359
berns Captain 1564 Rep 672 Posts Drives: '07 E90 335i Join Date: Feb 2013 Location: Los Angeles, CA iTrader: (1)	Any updates on this thing? __________________ BRG M3 Clubsport Build 600hp 1M-clone Time Attack build
	Appreciate 0 Quote

10-22-2019, 10:07 AM	#361
ajsmithvmi Professional Hack 96 Rep 379 Posts Drives: 2009 135i Join Date: Dec 2017 Location: St Louis iTrader: (5)	What's your IG ? __________________ MCS 1WNR Dampers \| Ground Control Camber Plates \| E90 M3 front control arms\| E90 M3 front tension arm w/ Turner monoball bearings \| E90 M3 Steering rack conversion \| SPL Adjustable Outer Tie Rod Ends \| M3 Rear Camber Arms \| SPL Adjustable Rear Toe Arms \| M3 Front Caliper Conversion \| 275/35/18 Toyo RA1s \| 18x9.5ET22 Apex EC-7’s \| mFactory LSD \| AIM EVO4S with GS Dash \| New for 2020: LS1 Swap!
	Appreciate 0 Quote

12-27-2019, 10:13 PM	#363
Cloud9blue Brigadier General 711 Rep 3,251 Posts Drives: around the potholes Join Date: Aug 2008 Location: NY/NJ/MA iTrader: (13)	Haven't been active on the forums for a while, but rather disappointed to see this still hasn't roll out of the shop yet. What's the timeline you guys are working with now? __________________ 09 BMW E92 335i: Top Mount EFR 7670 / Dinan / AP Racing / Wavetrac / TC Kline [Full Mod List] 07 BMW R1200S: Shine Yellow / Akrapovic / Ohlins 19 Volvo V90 T6: R-Design / Bowers & Wilkins / Polestar Optimization
	Appreciate 0 Quote

05-08-2020, 09:41 PM	#364
sirdaft1 Brigadier General 2203 Rep 3,336 Posts Drives: X5 & E90 WTCC Widebody Racecar Join Date: Feb 2013 Location: Chicago West Burbs iTrader: (9) Garage List 2007 E90 WTCC Wideb ... [9.50] 2012 BMW X5 xDrive35i [9.00]	Hey all! I haven't been active on this forum in a long time as it seems most folks have moved over to FB groups. However I miss the forum feel. That said, for those who are still active on here... after nearly 3 years of being built... she's 99.76848484% complete! Just fired her up and revved her for the first time last night! Disregard ugly wheel mode... she has some fresh E88's ready to go on when she rolls out of the shop. I'm not sure where I last left off but we have her built to run full aero - an AJ Hartman CF rear diffuser with vented rear wheels, AJ Hartman rear wing and a Klaus Composites front splitter. We also installed the 3-way JRZ Motorsport suspension, a sidepiped oval exhaust to make clearance for the custom driveshaft/reduce heat for the eventual flat bottom flooring, installed the AiM dash + GPS unit, custom aluminum dash, Sparco Circuit II halo race seat, safety netting & padding, finished the completely slimmed down wiring harness (which was a MAJOR project... in hindsight, would have been easier to convert to standalone), custom mounted 335d coolant tank relocation, buttoned up of the SpeedTech ST kit with custom Vibrant clamped plumbing, finished the install of the tubular front end with custom ducting... and I'm sure plenty more. And aside from a few tiny items, the remaining things on the list are to order a custom driveshaft from DSS to fit the M3 DCT 3.15 LSD conversion, uprights for the wing, alignment/corner balance, dyno, code out any of the wonky factory nannies and get her dialed in on track. The bummer is... after all this time... it doesn't look like any of the tracks will be open due to this lockdown! But I did just get an email from MVP about an early August open trackday at Autobahn.... GASP
	Appreciate 1 Nardoninety166.00 Quote

05-08-2020, 10:26 PM	#365
sirdaft1 Brigadier General 2203 Rep 3,336 Posts Drives: X5 & E90 WTCC Widebody Racecar Join Date: Feb 2013 Location: Chicago West Burbs iTrader: (9) Garage List 2007 E90 WTCC Wideb ... [9.50] 2012 BMW X5 xDrive35i [9.00]	And a few photos from the other night!
	Appreciate 0 Quote

05-10-2020, 04:49 AM	#366
Aus335iguy Colonel 650 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	That thing is off it's head! Nicely done mate __________________ When you doppelkaplung you doppel your fun.
	Appreciate 1 sirdaft12202.50 Quote

05-10-2020, 05:28 AM	#367
PORTMOODY Captain 141 Rep 635 Posts Drives: Coal Roller Join Date: Mar 2014 Location: Vancouver, BC iTrader: (1)	what does it weigh?
	Appreciate 1 sirdaft12202.50 Quote

05-12-2020, 10:18 PM	#368
GORDON.M3 Brigadier General 1421 Rep 3,001 Posts Drives: E92 M3 • F25 X3 M-Sport Join Date: Dec 2013 Location: LAX/YYZ/NRT iTrader: (11)	Crazy build, the amount of custom work and fab that has gone into this project is amazing. Well done. __________________ INSTAGRAM: GORDON.M3 North American Mr12Volt Carplay/Android Auto Distributor DINAN \| EVOSPORT \| VAC \| ARP \| RD SPORT \| NEEZ \| EIBACH \| CSF \| IND \| BILSTEIN \| KLASSEN \| BREMBO \| ENDLESS \| BBS \| BPM SPORT \| PROJECT MU \| EVENTURI
	Appreciate 1 sirdaft12202.50 Quote

05-13-2020, 05:22 AM	#370
Aus335iguy Colonel 650 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	Clearly a street car with emissions and noise compliance in mind : __________________ When you doppelkaplung you doppel your fun.
	Appreciate 1 sirdaft12202.50 Quote

05-27-2020, 02:31 AM	#371
beanster64 New Member 2 Rep 8 Posts Drives: E92 335i Join Date: Mar 2020 Location: UK iTrader: (0)	very comprehensive build, well done... was there a reason for not choosing a coupe as a shell instead of a 4 door model?
	Appreciate 0 Quote

07-20-2020, 11:07 AM	#373
Compactive Enlisted Member 12 Rep 43 Posts Drives: 09 335i, 95 318ti Join Date: Jun 2014 Location: 20904 iTrader: (0)	DM sent
	Appreciate 0 Quote