[BOBDAMAGE]

I’ve been silent in the community for some time now and I’ve been noticing that there are many that have the issue of having to go out to purchase a windows machine to do their coding and diagnostics. This post is not to say that I’m the only one that has achieved this, however, there is no one place that I’ve seen the information outlined in any great detail. I’ll provide all the links for everything used to achieve what I have with the BMW Standard tools along with ISTA 4.28.13 running on my M1 MacBook Air.

STEP 1: - SETTING UP YOUR VIRTUAL PLATFORM

• Download parallels. If you want to pay for the program that’s up to you. Personally i downloaded it here: https://1337x.to/torrent/5401456/Par...macOS-haxNode/
• To crack the software it will require you to install the “.sh” file using the terminal. You can follow the instructions in the read me file in the crack folder to perform the install. Ensure that you copy the crack folder to your computer from the mounted drive!!!
• Install any windows version of your choosing. I went with Windows 11 Pro that was provided with the parallels install

STEP 2: - INSTALLING BMW STANDARD TOOLS

• Download the “VRRTuning_2021_BMWTOOLPACK” from https://drive.google.com/file/d/1pz5...N7mBMxys_/view
• Install the BMW Standard Tools package in the first folder by running as administrator. I claim no glory for this and VRRTuning did an awesome job in providing this package along with a video on how to install the full software.
• You may run into the error of not having .NET 3.5 installed. If so, follow these steps:
• Hit command
• Type Windows features
• Check the box that says .NET Framework 3.5 (includes .NET 2.0 and 3.0)
• Hit OK and it should install
• At this point you should be able to now install your package

STEP 3: - K+DCAN DRIVERS

• Plug your cable into your computer. You will need a USB-A to USB-C connector. The cable i bought came with one.
• Open device manager and you should see that your device is detected but uninstalled. You can find the driver here: https://ftdichip.com/wp-content/uplo...tributable.zip
• Ensure that after downloading the driver you’ve extracted it to the C:/ drive
• You’ll have to install the driver twice!
• Right click on the D CAN device under ports and update the driver locally from your C:/ drive. It should install the USB Controller. Then do the same again for the USB Serial that pops up in yellow.
• At this point you should be able to open INPA and see that your cable works!
• A good quick test is to just do a reinitialisation of your sunroof if equipped or activate some function like lights or so on with INPA. Read you SGDB info to make sure all modules are being read and okay.

STEP 4: - INSTALL ISTA AND PSDZ DATA

• Installation of these programs are explained fully in the video linked above by VRRTUNING.
• Installation of ISTA is quite straightforward and does take quite some time. On my M1 it took about 30 mins to install.
• For full installation you’ll need at least 369GB of space available.

NB: YOU WILL GET AN ERROR WHEN INTIALLY RUNNING NCS EXPERT. YOU MUST CREATE THE FSW_PSW.MAN FILE TO AVERT THIS PROBLEM!!!

Obviously there’s more to have updated and installed along the way with the options you choose such as what SP Datens are used and so forth. That is all covered in the linked video so it has not been stated here. The platform is smooth and lag free and personally I’ve had no issues in coding or doing any form of diagnostics thus far.

Hopefully this helps all the M1/M2 users out there that don’t want to use a windows laptop to do their coding and diagnostics or it be that they’re rarely even doing so and don’t want to buy a windows laptop that they’ll rarely ever use. If you have any questions or issues feel free to PM me.

[hadi_e46]

Hey, for some reason whenever I try to read out my car in ista, it says this error "The vehicle could not be identified successfully. Check vehicle interface and 'PAD active'." it said online to change a value in ediabas.ini from REMOTE to STD:OBD. I did that but I still get the error when reading out the car

[BOBDAMAGE]

Originally Posted by hadi_e46

Hey, for some reason whenever I try to read out my car in ista, it says this error "The vehicle could not be identified successfully. Check vehicle interface and 'PAD active'." it said online to change a value in ediabas.ini from REMOTE to STD:OBD. I did that but I still get the error when reading out the car

You may not have selected the correct ediabas folder. Sometimes when installing ISTA Standlaone it creates its own ediabas folder in the EC-APPS folder in ISTA. You’d need to configure that one for it to work properly.

[BOBDAMAGE]

So there are those that have PM'd me and also been having some issues doing a setup of their own. I'm starting a video series on YouTube to document everything done at my shop using the M1 MacBook Air.

Here's a video link to provide insight on what to do to get things installed and up and running as has been stated before in the post with instructions:

If you have any questions or concerns, feel free to reach out!

[knsvr]

Originally Posted by hadi_e46

Hey, for some reason whenever I try to read out my car in ista, it says this error "The vehicle could not be identified successfully. Check vehicle interface and 'PAD active'." it said online to change a value in ediabas.ini from REMOTE to STD:OBD. I did that but I still get the error when reading out the car

Here's how I solved this both on M1 Mac with Parallels and Win-based laptop:

1. Go to HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\I SPI\Rheingold in regedit
2. Change the BMW.Rheingold.OnlineMode value from False to True

To mention, I've installed ISTA, Ediabas and Standard Tools from sources that differ from ones mentioned in the OP — and I have not had BLP base extracted to ISTA folder the first time I've encountered the same issue as you. Wanted to save some disk space since manuals noted BLP (and the big boy SDP) as worthy only for the F-Series programming, however, my initial task was E65 coding.

I've ended up adding BLP and changing the Registry Editor value mentioned above to finally let ISTA connect to the vehicle.

Also, big thanks to BOBDAMAGE for putting everything together. Thought I would be stuck with old Windows laptop every time I need to connect to my car.

[Andy198712]

Do you think this will work on my older 2013 model Mac book pro?