[Cbozz]

let me see what headlights you put in it!

[davidzf]

solve now? for I have the same problem,keep flash with engine on -_-...

[davidzf]

wel
1:headlight:jump pin6 to 5,and do not forget connect the GND.

2:NCSexpert:add VO522,coding a blank MAN file to the module.

3:enjoy your bi-xenon headlight!!!

[Dziqsek_]

Hes it will work ( ive made to my car prelci halogen to lci xenon) but angel eyes are on full bright all the time and they do not dimm when xenons are on.

[davidzf]

try this：

serch for "PWM_SL_1_FKT_SL_TFL"

make sure it is “wert_7"

[davidzf]

I also have a new damm problem

My right side AE is shut now

I had ISTA run by ICOM,it report short circuit

Is my NFRM module dead? or just locked?

[kokignatov]

Originally Posted by davidzf

I also have a new damm problem

My right side AE is shut now

I had ISTA run by ICOM,it report short circuit

Is my NFRM module dead? or just locked?

If you're NFRM is dead i guess there wont be any exterior lights at all..

[Dziqsek_]

Originally Posted by davidzf

try this：

serch for "PWM_SL_1_FKT_SL_TFL"

make sure it is “wert_7"

I have prelci on frm2 and dont have this command

[davidzf]

Originally Posted by *******_

I have prelci on frm2 and dont have this command

update to frm3,which support xenon&AHL xenon

[Dziqsek_]

I know that, but despite of changing to frm3 and coding it i also need some rewiring to make it work right ?

[Cbozz]

Originally Posted by rayguy24

I'm in here too. Just reading your progress and waiting patiently for all my parts to arrive. Keep it up!

hahah, I am as well!!

[E90PAT]

Good thread. Deis4life, youre an incredible guy

[Dziqsek_]

Originally Posted by davidzf

update to frm3,which support xenon&AHL xenon

My frm supported xenons but no ahl ( my lci headlamps are not ahl ones) , buying frm3 is going easy i want to work on my frm2 i know its possible since e8x and e9x working on frm2 also and have AE dimm with xenons

[Alex_WLY]

Originally Posted by davidzf

I also have a new damm problem

My right side AE is shut now

I had ISTA run by ICOM,it report short circuit

Is my NFRM module dead? or just locked?

hello from romania!

i have a E90 320d 2007 with xenon and few days ago update the car to LCI xenon without AHL.
OEM lighting module was FRM 2.now i have FRM 3 and everything working normaly,but the angel eyes from right is off and daylight it's not working from front.the taillights are on when i start the engine.and i have two errors like @uweric5985

[Dziqsek_]

Update it with your vin using winkfp then use ncs to set t to default values, or maybe you need to do some rewire. Your AE get dimm when you turn on xenons ?

Btw. Brana castle kicks ass !!

[Alex_WLY]

Originally Posted by *******_

Update it with your vin using winkfp then use ncs to set t to default values, or maybe you need to do some rewire. Your AE get dimm when you turn on xenons ?

it's possible to not working right angel eyes because the coding was wrong?
today was coded FRM3.after coding the right angel eyes not working.

this is the coding list

frm3 e90 WLY TRC

[Dziqsek_]

I will check it in about an hour now i have to bath my week old son

[Alex_WLY]

Originally Posted by *******_

I will check it in about an hour now i have to bath my week old son

about an hour ago i pun on my car FRM 2 and the angel eyes it's working.so it's not an electrical problem....it's from coding.

FRM2 it's not coded for LCI.anyway i want to coding FRM 3 because it's much better and have more function.

[Dziqsek_]

You send whole car data, i need only FRM

[Alex_WLY]

Originally Posted by *******_

You send whole car data, i need only FRM

the coding was not maked by me....i just ask to find answers for my problems.this is what i recived from the guy who coded my car..

with FRM 3 angel eyes dimm on low beam?or will light at high power?thnks

[Dziqsek_]

With FRM3 they should dimm ( very strong - barely visible) with frm2 they are on full power all the time

[Alex_WLY]

Originally Posted by *******_

With FRM3 they should dimm ( very strong - barely visible) with frm2 they are on full power all the time

ok.
so the frm 3 it's ideal for LCI headlights.but few people can code it.
btw i have LCI from rear also.there everything worke's ok.when i start the engine,with FRM 3 taillight's are on.....just from front daylight not working.