|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
DIY: How to setup BMW Standard Tools 2.12 w/Windows 10 x64 (64-bit)
|
|
04-15-2017, 07:42 AM | #155 |
Ballin' out of control.
520
Rep 1,289
Posts |
Yes, that's correct.
__________________
Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms
|
Appreciate
0
|
05-04-2017, 01:09 PM | #156 |
Private First Class
33
Rep 145
Posts |
I have a 6 month old white board K+DCAN cable I bought off of Amazon 6 months ago. I checked the PID and chips and it is supposed to be legit. Pin 7 & 8 are NOT bridged.
I am running Windows 10 64 bit and I am wondering what is the minimum install to test the cable. I was hoping it was d-can and drivers. Every time I run d-can, the red light on the cable goes out and it says cable not found. I need to reset by unplugging. I ran obdsetup and adjusted the registry key so everything runs perfect. I set com port and latency to 1. My working theory it is a communication problem between the computer and cable. What is the quickest way to test? Can I run a serial utility and send commands?
__________________
2008 E90 335i Jet Black Black Dakota Brushed Aluminum
Steptronic Cold Premium Sport Comfort Nav Logic 7 How to import a BMW into Canada without getting rear ended |
Appreciate
0
|
07-16-2017, 09:24 AM | #157 |
Registered
2
Rep 3
Posts |
3 Days and counting.....
Hi All - Thanks for this detailed instruction. This car coding issue is new to me. I've been working on this for days primarily just to change my E92 battery and not pay the dealer/local shop an extra $200+. Anyway, trying really hard to follow the instructions carefully (to avoid the dreaded ) and I'm almost done.
My biggest problem is that all of the images in the post don't display for me and I'm relying solely on the text. Where the picture should be I get, "Please update your account to enable 3rd party hosting........www. photobucket.com/p500" Second issue is that I can't find anyway to use cmd.exe in windows 10 64 bit. Hence, I've been using PowerShell. It seems to work fine, but the "/V" command doesn't work and I've just been omitting that code when copying. Are the "/V" and other "/?" commands necessary? Next issue is this step: Go to the E89\DATEN directory and execute the LADEN.BAT script. Code: C:\>cd /d X:\E89\DATEN X:\E89\DATEN>laden.bat Since I can't see the images (Photobucket.com/P500 problem), I'm likely missing something important. "X" has always referenced the location where the rar files were extracted. PowerShell is giving me a "The term "laden.bat" is not recognized......" error? I was able to run Laden.bat inside of File Explorer but the screen flashed so fast that I couldn't see what occurred. Anyway, I when it completed the dialog box closed and never gave me an option to "Continue." I don't really understand what this step is for.....what now? Lastly, regarding the below coding: The renaming was fine, but I'm having trouble finding these file locations. The entire instructions were rather specific regarding the file paths until I got to this point. i.e. where is the "NCSEXPER.EXE" that I'm supposed to copy to C:\NCSEXPER\BIN? Where is the source for "copy *.PFL" OR "copy INFO.GER INFO.ENG" Edit: I think I figured it out. Are these sources from the original saved files to USB from the first install....USB X:\NCSEXPER32 X:\NCS EXPER PROFILES, ETC.? Example: Code: rename C:\NCSEXPER\BIN\NCSEXPER.EXE NCSEXPER.OLD rename C:\NCSEXPER\CFGDAT\NCSEXPER.TXT NCSEXPER.GER copy NCSEXPER.EXE C:\NCSEXPER\BIN /v copy NCSEXPER.TXT C:\NCSEXPER\CFGDAT /v Copy the NCS Expert profiles to the C:\NCSEXPER\PFL folder. Example: Code: copy *.PFL C:\NCSEXPER\PFL /v Copy the NFS INFO.GER file to avoid a nuisance error in WinKFP. Example: Code: cd C:\EC-APPS\NFS\DATA\GDATEN copy INFO.GER INFO.ENG /v Anyway, great write-up and very much appreciated. Thank you. Last edited by Daver610; 07-16-2017 at 11:13 AM.. |
Appreciate
0
|
07-16-2017, 10:14 AM | #158 | |
Ballin' out of control.
520
Rep 1,289
Posts |
Quote:
I don't know anything about it or its functionality, but a virtual machine image is available here: http://www.e90post.com/forums/showthread.php?t=1220039
__________________
Alpina B3 Flash/BMS OCC/ER CP/ETS 5/HKS BOV/M3 Control Arms
|
|
Appreciate
0
|
07-16-2017, 02:37 PM | #159 |
Registered
2
Rep 3
Posts |
Not totally worthless
Many, many thanks. It's all working and I never did get the images in the instruction figured out. Thank goodness for some old DOS coding memories which I haven't used in 30 years. These instruction were so good that a relative newbie could successfully complete getting INPA running with only the text instructions.....WELL DONE! Thank you
|
Appreciate
1
808AWD325xi519.50 |
08-24-2017, 01:47 AM | #161 |
Private First Class
26
Rep 143
Posts |
OP should of just made a PDF File version just upload it to google drive and share here... that's pretty silly we can't view the pics because of stupid photo bucket policy (or what ever photo client it was uploaded to)
|
Appreciate
0
|
10-11-2017, 04:04 AM | #163 |
New Member
0
Rep 13
Posts |
Hello!
So i`m trying to code folding mirrors,but with no sucess,with my bmw 530d e61 2006. My NCS expert FOLDER is downloaded from link,where guys from another forum told,that it is working fine. (already tried diffrent version,same error appears). My steps are:Open NCS expert,load profile (revtor,or expertmode) ,press F1,then F3,choose CAS,and get error : "FOLLOWiNG FEATURE IS INVALID FOR: FA$510 " So basicly i cant read my car,cant make FSW file,can anyone know whats the problem? INPA is working fine. NCS version is: 3.1.0 Daten is updated to V60,my car have V53.5 The TRC and MAN files in "work" folder are empty,and the size of them is 0 bytes Can someone help me? |
Appreciate
0
|
10-17-2017, 04:18 PM | #164 | |
Major
263
Rep 1,173
Posts |
Quote:
|
|
Appreciate
0
|
10-18-2017, 07:09 AM | #165 | |
New Member
0
Rep 13
Posts |
Quote:
Now i updated the NCS version,the error is litle bit diffrent. But anyways,i cant read VO,create my cars FSW file. The error now is like this,and if i press OK,therte is only my FG,the FA is blank |
|
Appreciate
0
|
11-02-2017, 11:17 AM | #166 |
Registered
0
Rep 1
Posts |
not sure if there is an easy fix to this
Thank you so much for the help on this post. I have one issue holding me up and was hoping that there is a fix for it. I installed everything as instructed but when I get into NCS Expert and read my car the F4 button to Process ECU is not available. If anyone has an idea that would address this issue any help would be greatly appreciated.
|
Appreciate
0
|
02-13-2018, 11:23 AM | #168 |
Registered
0
Rep 4
Posts |
Everything works perfectly for my e92 but how would I add another chassis on the same computer? I'm trying to work on an e46 also so would I just redo the whole second part of the tutorial (After you reinstall windows again) with the spdaten files for the e46? Or will that mess up all the files I already have for my e92?
|
Appreciate
0
|
03-28-2018, 07:17 PM | #170 | |
Registered
0
Rep 1
Posts |
Quote:
I am French so forgive me for my mediocre English, this is a Google translation! I read with great attention and interest your post because I was hoping to finally find an answer to my problem, maybe you can help me! I have a BMW E39 530D touring 7/2002 with automatic gearbox, I was forced to replace the electronic part of my ABS / ASC because the former was HS, now I have to code with the VIN of my car ! It's been a month since I browse the forums, tutorials, videos, whether on French sites, English and German, alas I still have not been able to solve my problem, certainly I understand some things better, but I do not did not find the solution because when I use INPA and I choose E39, I do not have the menu "functionals jobs" as if it was an E90, so I can not read the data AIF / UIF I have tried all the solutions that you quote in your post, but I do not have access to some because I have an E39. My BMW VIN is WBADP81010GW41446. I tried with INPA, NCS expert, WnKfp, NCS Dummy, Tools 32 ... nothing to do I can not find the number ZB, the part number that INPA gave me is 6756342 but impossible to find in SP DATEN that I have, I tried several versions of DATEN, nothing to do I think the module is "ASC5_7.C09", that the IPO file is "A_ASC5.IPO" and that the program is "C_ASC5.PRG", I think 2 ECU are concerned "G832 or 10G832" and " MG526 or 10MD526 ", but even with all this information, I can not code the second hand module with my VIN number. The help that I ask you is: How can I do to find the number ZB? Thanks |
|
Appreciate
0
|
05-13-2018, 09:48 AM | #172 |
Major
413
Rep 1,178
Posts |
I followed and completed the installation steps to the letter. I was able to connect to the car with INPA, i selected shift+f8 for E89 then selected engine MSS60 for s65 (M3) for my car then a popup warned me in german that said something about versions did not pass. Then the next menu was ALL in german. It seemed to work but the selections seemed to be completely different than an another user bmw E90 demo youtube video. I initially wanted to access the PM -IBS menu (F5) under status (F5) that i saw in the youtube video but the german looked nothing like everything seemed different. But i was able to recognize 'fehler lesen' read codes so it's communicating with the car. I have SP Daten 50-2 from the tutorial.. Is this a failure of this tutorial that only the first menu was in english ?? I thought i went through the extra pain so the menus would be in english.
|
Appreciate
0
|
12-08-2018, 08:40 AM | #175 |
Lieutenant Colonel
470
Rep 1,659
Posts
Drives: 2022 WRX World Rally Blue
Join Date: Apr 2009
Location: Somewhere
|
Your PM box is FULL!!
__________________
Rick
|
Appreciate
0
|
12-08-2018, 10:54 PM | #176 |
Lieutenant Colonel
1458
Rep 1,912
Posts |
Get this outdated POS install off the forum.
BMW Standard Tools: https://mega.nz/#F!zw5V0IrD!08GgdgH0AtxZcWh62_76xA Follow the instructions in the folder. It takes me 10 minutes to install this. |
Appreciate
4
|
Bookmarks |
Tags |
bmw standard tools, coding, diy, inpa, winkfp |
|
|