Replaced AFS Active Steering module- need help winkfp

ihernandez7910 · 01-07-2016, 03:12 AM

Hello . Hopefully i can get some assistance or direction.

Patient: 2008 bmw 335i w/active steering

I replaced my damaged AFS module- active steering control module. The original was causing dsc,brake,tpm malfunctios it was completly dead. Not responding.... So i bought a used one. Worked but after driving a bit malfuntions would trigger

When I used INPA to read module status...the AFS module showed VIN yyyyyyyyyyy instead of my vehicles vin.

Being fluent with ncs expert I got the balls to usw WINKFP to,update and writte vin to my module.

I imported all the data,ecu,sgdat files from sp daten v53.

Though i had it all figured out ..

Well the flashing failed. After reading a bit further I found that i had not matched the production date zb nunber to the module family afs90.

When going back to,reflash i found that my zb number was not available as one of the options.

Zb number not found message

Does anyone know,how,I can solve this?

cryptomit · 01-07-2016, 04:19 AM

What zusb number did you choose? Based on what? Did you try comfort mode?

ihernandez7910 · 01-07-2016, 04:27 AM

i used zusb #6782284

my afs module called for zusb #6782283 which i could,not,find as an option in winkfp when selecting module afs90 family module.

step 1: hit f1 comfort mode
step:2 updatedusb --selected zusb #6782284 . (only option it showed)

step 3: entered vin

step 4: hit done

step 5: hit prog zb update

cryptomit · 01-07-2016, 04:31 AM

and it failed at the beginning? Or started flashing correctly?

ihernandez7910 · 01-07-2016, 04:33 AM

it started flashing. it was all great. untill right at about 100%. i got errors.

ihernandez7910 · 01-07-2016, 05:24 AM

these are the errors i got after 100% flash

2089 PABD 06FLash Programmieren 2544 Switching Programming mode failed 10FLASH.DIAGNOSE

2086 PABD 06Flash Programmieren 3352 Signature check Failed 10FLASH, FLASH_SIGNATUR

2086 Error COAPI2.cco CoapiRunCabd 6 Signature Check Failed SG-PROGRAMMIEREN

2086 Error CoapiKfProgSgD2 19 Signature Check Failed

cryptomit · 01-07-2016, 07:09 AM

Your cable is setup correctly?

Is AFS working ok now, or it stopped at all?

ihernandez7910 · 01-07-2016, 10:42 AM

my cable works well with inpa. ncs expert. readd/writtes.

i was fairly comfertable with coding

so I tried winkfp since i felt i had everything in line.

the afs module is not working . but its not,bricked. it still responds

808AWD325xi · 01-07-2016, 11:43 AM

Quote:

Originally Posted by ihernandez7910

[...]
I imported all the data,ecu,sgdat files from sp daten v53.

Though i had it all figured out ..
[...]

It looks like it failed authentication and signature verification.

Something may have gone awry when you imported the daten...do you have a file named SGIDC.AS2 in the C:\EC-APPS\NFS\DATA\GDATEN folder?

Quote:

Originally Posted by ihernandez7910

i used zusb #6782284

my afs module called for zusb #6782283 which i could,not,find as an option in winkfp when selecting module afs90 family module.

step 1: hit f1 comfort mode
step:2 updatedusb --selected zusb #6782284 . (only option it showed)

step 3: entered vin

step 4: hit done

step 5: hit prog zb update

ZB number 6782284 is correct:

Code:

;SG-TYP: AFS90
;ZB-NR  TYP-NR  HW-NR  IX SW-NR     AM          PIN S CS
6782284,0000000,6782284,A,6782284DA,0FFFFFFFFFD,000,1 7

To verify, launch INPA and identify all installed modules...E90 -> Select E90 -> Functional Jobs -> <F2> Identification. The Part No. should be 6782284 which aligns with the HW number above.

ihernandez7910 · 01-07-2016, 11:59 AM

Quote:

Originally Posted by 808AWD325xi

Quote:

Originally Posted by ihernandez7910

[...]
I imported all the data,ecu,sgdat files from sp daten v53.

Though i had it all figured out ..
[...]

It looks like it failed authentication and signature verification.

Something may have gone awry when you imported the daten...do you have a file named SGIDC.AS2 in the C:\EC-APPS\NFS\DATA\GDATEN folder?

Quote:

Originally Posted by ihernandez7910

i used zusb #6782284

my afs module called for zusb #6782283 which i could,not,find as an option in winkfp when selecting module afs90 family module.

step 1: hit f1 comfort mode
step:2 updatedusb --selected zusb #6782284 . (only option it showed)

step 3: entered vin

step 4: hit done

step 5: hit prog zb update

ZB number 6782284 is correct:

Code:

;SG-TYP: AFS90
;ZB-NR  TYP-NR  HW-NR  IX SW-NR     AM          PIN S CS
6782284,0000000,6782284,A,6782284DA,0FFFFFFFFFD,000,1 7

To verify, launch INPA and identify all installed modules...E90 -> Select E90 -> Functional Jobs -> <F2> Identification. The Part No. should be 6782284 which aligns with the HW number above.

InPa does call zusb #6782284

and i do have the following files in apps/nfs/data/gdaten

historie.bsu
hwnr.da2
info.ger
kfconf10
npv
prgifsel
sgidc
sgidd
swtconf0

how can i verify that those are the ones associsted to the e89 daten...?

808AWD325xi · 01-07-2016, 02:26 PM

Quote:

Originally Posted by ihernandez7910

InPa does call zusb #6782284

and i do have the following files in apps/nfs/data/gdaten

historie.bsu
hwnr.da2
info.ger
kfconf10
npv
prgifsel
sgidc
sgidd
swtconf0

how can i verify that those are the ones associsted to the e89 daten...?

I'm not aware of a way to do it.

ihernandez7910 · 01-07-2016, 03:04 PM

does anyone know what the correct configurstions "ini options" are?

808AWD325xi · 01-07-2016, 04:49 PM

Quote:

Originally Posted by ihernandez7910

does anyone know what the correct configurstions "ini options" are?

I suggest the following modifications:

Uncheck Test Checksum
Uncheck Force program programming in comfort mode
Uncheck activate Bootsectorupdate
Uncheck UIF write after data
Uncheck UIF write after program
Uncheck UIF write in comfort mode
Change the Base directory for working directories of WinKFPT to ..\

ihernandez7910 · 01-07-2016, 05:38 PM

Quote:

Originally Posted by 808AWD325xi

I suggest the following modifications:

Uncheck Test Checksum
Uncheck Force program programming in comfort mode
Uncheck activate Bootsectorupdate
Uncheck UIF write after data
Uncheck UIF write after program
Uncheck UIF write in comfort mode
Change the Base directory for working directories of WinKFPT to ..\

okay i will give this a "go"

ihernandez7910 · 01-08-2016, 12:00 AM

Quote:

Originally Posted by ihernandez7910

okay i will give this a "go"

I made the changes and the option to enter vin was no longer available

I'm at a loss here... Have tried everything ....

808AWD325xi · 01-08-2016, 10:25 AM

Quote:

Originally Posted by ihernandez7910

I made the changes and the option to enter vin was no longer available

I'm at a loss here... Have tried everything ....

If you want to be prompted for the VIN, you will need to turn on UIF writes.

Check UIF write after data
Check UIF write after program
Check UIF write in comfort mode

If the module has been successfully flashed and you just want to write the VIN, you can also use Tool32 to do so.

C:\EDIABAS\ECU\AFS_90.PRG:

Code:

		<JOBNAME>C_FG_LESEN</JOBNAME>
		<JOBCOMMENT>Fahrgestellnummer lesen</JOBCOMMENT>
		<JOBCOMMENT>Standard Codierjob</JOBCOMMENT>
		<JOBCOMMENT>KWP2000: $1A ReadECUIdentification</JOBCOMMENT>
		<JOBCOMMENT>$90 Vehicle Identification Number</JOBCOMMENT>

Code:

		<JOBNAME>C_FG_SCHREIBEN</JOBNAME>
		<JOBCOMMENT>Fahrgestellnummer schreiben</JOBCOMMENT>
		<JOBCOMMENT>Standard Codierjob</JOBCOMMENT>
		<JOBCOMMENT>KWP2000: $3B WriteDataByLocalIdentifier</JOBCOMMENT>
		<JOBCOMMENT>$90 Vehicle Identification Number</JOBCOMMENT>

ihernandez7910 · 01-09-2016, 11:33 PM

Quote:

Originally Posted by 808AWD325xi

If you want to be prompted for the VIN, you will need to turn on UIF writes.

Check UIF write after data
Check UIF write after program
Check UIF write in comfort mode

If the module has been successfully flashed and you just want to write the VIN, you can also use Tool32 to do so.

C:\EDIABAS\ECU\AFS_90.PRG:

Code:

		<JOBNAME>C_FG_LESEN</JOBNAME>
		<JOBCOMMENT>Fahrgestellnummer lesen</JOBCOMMENT>
		<JOBCOMMENT>Standard Codierjob</JOBCOMMENT>
		<JOBCOMMENT>KWP2000: $1A ReadECUIdentification</JOBCOMMENT>
		<JOBCOMMENT>$90 Vehicle Identification Number</JOBCOMMENT>

Code:

		<JOBNAME>C_FG_SCHREIBEN</JOBNAME>
		<JOBCOMMENT>Fahrgestellnummer schreiben</JOBCOMMENT>
		<JOBCOMMENT>Standard Codierjob</JOBCOMMENT>
		<JOBCOMMENT>KWP2000: $3B WriteDataByLocalIdentifier</JOBCOMMENT>
		<JOBCOMMENT>$90 Vehicle Identification Number</JOBCOMMENT>

Okay. I am just familiarizing my self with tool32. It doesn't look all that difficult. I will give this a try.

Thanks . I will report back.

808AWD325xi · 01-09-2016, 11:58 PM

Quote:

Originally Posted by ihernandez7910

Okay. I am just familiarizing my self with tool32. It doesn't look all that difficult. I will give this a try.

Thanks . I will report back.

Best of luck and report back, thanks.

robinasu · 06-01-2020, 02:30 PM

Did you ever resolve this?

I am having a "2089 - ERROR_ECU_SECURITY_ACCESS_DENIED_SECURITY_ACCESS_R EQUESTED" error and cannot flash a module.

Dfbpurcell · 07-30-2022, 10:17 PM

Did you ever resolve this? I have been getting a lot of DSC codes, brake light etc after installing a used AFS rack.

01-07-2016, 03:12 AM	#1
ihernandez7910 Banned 101 Rep 229 Posts Drives: 08 E90 335i 6 spd MT Join Date: Sep 2014 Location: Everett, WA iTrader: (0) Garage List 2008 BMW 335 [0.00]	Replaced AFS Active Steering module- need help winkfp Hello . Hopefully i can get some assistance or direction. Patient: 2008 bmw 335i w/active steering I replaced my damaged AFS module- active steering control module. The original was causing dsc,brake,tpm malfunctios it was completly dead. Not responding.... So i bought a used one. Worked but after driving a bit malfuntions would trigger When I used INPA to read module status...the AFS module showed VIN yyyyyyyyyyy instead of my vehicles vin. Being fluent with ncs expert I got the balls to usw WINKFP to,update and writte vin to my module. I imported all the data,ecu,sgdat files from sp daten v53. Though i had it all figured out .. Well the flashing failed. After reading a bit further I found that i had not matched the production date zb nunber to the module family afs90. When going back to,reflash i found that my zb number was not available as one of the options. Zb number not found message Does anyone know,how,I can solve this?
	Appreciate 0 Tweet Quote

01-07-2016, 04:19 AM	#2
cryptomit Captain 93 Rep 713 Posts Drives: 320d 2012 Join Date: Dec 2013 Location: AS iTrader: (0)	What zusb number did you choose? Based on what? Did you try comfort mode? __________________ Click "Appreciate" if I helped you.
	Appreciate 0 Quote

01-07-2016, 04:27 AM	#3
ihernandez7910 Banned 101 Rep 229 Posts Drives: 08 E90 335i 6 spd MT Join Date: Sep 2014 Location: Everett, WA iTrader: (0) Garage List 2008 BMW 335 [0.00]	i used zusb #6782284 my afs module called for zusb #6782283 which i could,not,find as an option in winkfp when selecting module afs90 family module. step 1: hit f1 comfort mode step:2 updatedusb --selected zusb #6782284 . (only option it showed) step 3: entered vin step 4: hit done step 5: hit prog zb update
	Appreciate 0 Quote

01-07-2016, 04:31 AM	#4
cryptomit Captain 93 Rep 713 Posts Drives: 320d 2012 Join Date: Dec 2013 Location: AS iTrader: (0)	and it failed at the beginning? Or started flashing correctly? __________________ Click "Appreciate" if I helped you.
	Appreciate 0 Quote

01-07-2016, 04:33 AM	#5
ihernandez7910 Banned 101 Rep 229 Posts Drives: 08 E90 335i 6 spd MT Join Date: Sep 2014 Location: Everett, WA iTrader: (0) Garage List 2008 BMW 335 [0.00]	it started flashing. it was all great. untill right at about 100%. i got errors.
	Appreciate 0 Quote

01-07-2016, 05:24 AM	#6
ihernandez7910 Banned 101 Rep 229 Posts Drives: 08 E90 335i 6 spd MT Join Date: Sep 2014 Location: Everett, WA iTrader: (0) Garage List 2008 BMW 335 [0.00]	these are the errors i got after 100% flash 2089 PABD 06FLash Programmieren 2544 Switching Programming mode failed 10FLASH.DIAGNOSE 2086 PABD 06Flash Programmieren 3352 Signature check Failed 10FLASH, FLASH_SIGNATUR 2086 Error COAPI2.cco CoapiRunCabd 6 Signature Check Failed SG-PROGRAMMIEREN 2086 Error CoapiKfProgSgD2 19 Signature Check Failed Last edited by ihernandez7910; 01-07-2016 at 05:32 AM..
	Appreciate 0 Quote

01-07-2016, 07:09 AM	#7
cryptomit Captain 93 Rep 713 Posts Drives: 320d 2012 Join Date: Dec 2013 Location: AS iTrader: (0)	Your cable is setup correctly? Is AFS working ok now, or it stopped at all? __________________ Click "Appreciate" if I helped you.
	Appreciate 0 Quote

01-07-2016, 10:42 AM	#8
ihernandez7910 Banned 101 Rep 229 Posts Drives: 08 E90 335i 6 spd MT Join Date: Sep 2014 Location: Everett, WA iTrader: (0) Garage List 2008 BMW 335 [0.00]	my cable works well with inpa. ncs expert. readd/writtes. i was fairly comfertable with coding so I tried winkfp since i felt i had everything in line. the afs module is not working . but its not,bricked. it still responds
	Appreciate 0 Quote

01-07-2016, 03:04 PM	#12
ihernandez7910 Banned 101 Rep 229 Posts Drives: 08 E90 335i 6 spd MT Join Date: Sep 2014 Location: Everett, WA iTrader: (0) Garage List 2008 BMW 335 [0.00]	does anyone know what the correct configurstions "ini options" are? Attached Images
	Appreciate 0 Quote

06-01-2020, 02:30 PM	#19
robinasu Private First Class 14 Rep 132 Posts Drives: 2012 E70 BMW X5d Join Date: Oct 2019 Location: Man Jose, CA iTrader: (0)	What happened here? Did you ever resolve this? I am having a "2089 - ERROR_ECU_SECURITY_ACCESS_DENIED_SECURITY_ACCESS_R EQUESTED" error and cannot flash a module.
	Appreciate 0 Quote

07-30-2022, 10:17 PM	#20
Dfbpurcell Private 16 Rep 76 Posts Drives: E90 335i N54 Join Date: Jan 2022 Location: NZ iTrader: (0)	Did you ever resolve this? I have been getting a lot of DSC codes, brake light etc after installing a used AFS rack.
	Appreciate 0 Quote