E90Post
 


The Tire Rack
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > For Help with NCSExpert Errors



Reply
 
Thread Tools Search this Thread
      06-27-2018, 09:04 PM   #265
adam_c
Private
Canada
8
Rep
77
Posts

Drives: e92 328i
Join Date: May 2018
Location: Calgary, AB

iTrader: (0)

Quote:
Originally Posted by jsanchez335 View Post
The profiles should already be configured to manipulate codes and to factory default. No need to clutter your NCS. You can even rename those and call them whatever you want.
Great thanks
Appreciate 0
      06-28-2018, 02:17 PM   #266
ka_rai
Enlisted Member
7
Rep
48
Posts

Drives: F20 118D
Join Date: May 2012
Location: france

iTrader: (0)

hi friends

i have doubt about remove $524 from VO in E70

ncsexpert read fine VIN


but after puch back to check "get code" i have error ( check my screen ) from ncsexpert


if i test with INPA 5.06 to read CAS
i have error ( check my screen from INPA )


i think i need upload my INPA or :dunno:
I have daten 60.1 but error say my SGBD version 17.014 and mine SGBD is version 12.000

so how solve this trouble , anybody have idea ?
Appreciate 0
      07-10-2018, 09:13 PM   #267
adam_c
Private
Canada
8
Rep
77
Posts

Drives: e92 328i
Join Date: May 2018
Location: Calgary, AB

iTrader: (0)

Alright my first coding adventure has failed and I don't know now, hoping someone can help as I can no longer do anything

Setup
bimmergeeks cable
bimmergeeks standard bmw tools
ncs expert using manipulation profile from bimmergeeks

Scenario
Wanted to code window roll up with fob

Steps
Loaded NCS Expert, chose "Manipulation" profile
Downloaded the trc file and modified the line KOMFORTSCHLIESSUNG_FB to aktiv
Saved the file as .MAN
Reloaded NCS Expert in coding mode, tried uploading the changes and...
Received the following error
Name:  error 1.PNG
Views: 3229
Size:  9.1 KB

Exited out of NCS Expert
Tried reloading and reading loading the CAS module (or any module) and now receive this error)
Name:  error 2.PNG
Views: 3471
Size:  9.3 KB


After everything, I also noticed that my VIN was off by 1 digit, should have ended in 2 but it ended in 1 inside of NCS Expert


If I open my TRC file in NCS Dummy, I'm also getting this error
[E] 20:24:23 An error occurred while reading "C:\NCSEXPER\WORK\FSW_PSW.TRC": Unresolved function keyword "CODIERUNG_ERFOLGT". Make sure chassis and module match those of the trace file.

Last edited by adam_c; 07-10-2018 at 09:26 PM..
Appreciate 0
      07-20-2018, 06:08 PM   #268
davemonfl
Private
14
Rep
71
Posts

Drives: 2008 328i w/sport package 6sp
Join Date: Sep 2017
Location: Sarasota FL

iTrader: (0)

Quote:
Originally Posted by d1saster View Post
Can't read 2URAD module. All other modules coded correctly. SP Daten 50.2, NCSExper 4.0.1, Standard Tools 2.12. While coding job is active it gives me this info: RAD2.C03, A_E65MMI.IPO, RAD2.PRG. The car is X1 e84 September 2013, Professional Radio. I suspect it is something to do with the MOST communication and Pin 7/8.

Error.log
[16:22:42.012] [2013-10-29] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65MMI.IPS/IPO) CDHapiResultText 1
[16:22:42.012] [2013-10-29] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RAD2

[16:22:42.122] [2013-10-29] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[16:22:42.122] [2013-10-29] [SERIE] SG antwortet nicht CODIERDATEN_LESEN
I know it was a while ago but did you ever resolve your issue? I have the exact same error. I was able to add $644 to VO for CAS and NFRM and do an FA_WRITE but when I try to do SG_CODIEREN to 2URAD I always get that error.
__________________
2008 328i with Sport Package, 6 speed
2007 Porsche Cayman 5 speed
Appreciate 0
      07-22-2018, 09:24 AM   #269
davemonfl
Private
14
Rep
71
Posts

Drives: 2008 328i w/sport package 6sp
Join Date: Sep 2017
Location: Sarasota FL

iTrader: (0)

Error when trying to do SG_CODIEREN to 2URAD

After adding a hands free mic and BT antenna to my 2008 328i with tel prep I am trying to activate the bluetooth.

I was able to add $644 to VO for CAS and NFRM and do an FA_WRITE succesfully but when I try to do SG_CODIEREN to 2URAD I always get the error below. Do I need to use a different cable or something?

[17:48:36.469] [2018-07-21] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65MMI.IPS/IPO) CDHapiResultText 1
[17:48:36.469] [2018-07-21] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RAD2

[17:48:36.585] [2018-07-21] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[17:48:36.585] [2018-07-21] [SERIE] SG antwortet nicht SG_CODIEREN
__________________
2008 328i with Sport Package, 6 speed
2007 Porsche Cayman 5 speed
Appreciate 0
      08-04-2018, 12:04 PM   #270
Lucios
New Member
1
Rep
6
Posts

Drives: Bmw 320d E90 Restyling
Join Date: Aug 2018
Location: Italy

iTrader: (0)

Help me!

I am not able to read the NFRM module to revert it back to stock after screwing something up. NCS expert returns me an error that I will post in the attachments. Thank you guys in advance.
Attached Images
 
Attached Files
File Type: txt ERROR.txt (2.6 KB, 146 views)
Appreciate 0
      08-28-2018, 03:04 PM   #271
Dr.Rockso
Enlisted Member
8
Rep
33
Posts

Drives: 2007 335i, 2011 335d
Join Date: Apr 2018
Location: a whales vagina

iTrader: (0)

Well looks like I posted the main section without seeing this sticky was here, so I'll try again.

I have NCS expert setup correctly I think, but I am having issues reading from my NFRM module. I can connect to the vehicle, read the vin, select chassis and NFRM from the f3 menu, but when I go to read module data I get an error. I have a 2011 335D, and recently downloaded NCS expert from bimmergeeks. Are there any updates I need to do to the software?

I keep getting this error message in log:
[11: 52: 22.065] [2018-08-28] [SERIES] 2021 Error LFCDHDIA.CPP (A_PL2FRX.IPS / IPO) CDHapiResultText 1
[11: 52: 22.065] [2018-08-28] [SERIES] Data transfer to SG disrupted IFH-0010: Data transfer interface / control unit faulty FRM_70

[11: 52: 22.185] [2018-08-28] [SERIES] 2021 Error COAPI2.CPP coapiRunCabd 6
[11: 52: 22.185] [2018-08-28] [SERIES] Data transfer to SG interfered with CODE_DATA_READ

Trying a simple coding job of turning up voltage on my angel eye bulbs.

Thank you for the help, this whole process has been a bit frusterating
Appreciate 0
      09-23-2018, 05:10 PM   #272
jojojijijojo
Private
11
Rep
80
Posts

Drives: E90
Join Date: Sep 2018
Location: usa

iTrader: (0)

Guys,
I need some help here.
When I bought my 2006 E90, it does not produce any chimes sounds, no seatbelt alert, no door sound, no turn signals tick tocks, nothing. It does play radio however with no problem.
I have NCS expert and I tried to reset the kombi to default settings, but still no sounds. What could be the issue? Thank you.

PS: I wanted to create a new thread but I couldn't, what a bummer.
Appreciate 0
      10-02-2018, 05:06 AM   #273
Seanman
Registered
0
Rep
3
Posts

Drives: 2006 bmw 325xi
Join Date: Oct 2018
Location: Ohio

iTrader: (0)

Cappl

Hello
I am trying to program a logic 7 radio into a bmw that has just the hifi system in it. When I try to read the cappl in ncs expert I get error coappi 2000 object file not found ccc_app.c06.
Any help will be great.
Appreciate 0
      07-12-2020, 02:15 AM   #274
ioversteer
Registered
0
Rep
3
Posts

Drives: E90s
Join Date: Jul 2020
Location: Santa Cruz

iTrader: (0)

(Disclaimer, i haven't used NCS Expert in a long time) I'm trying to run NCS Expert and i am getting stuck after entering my chassis number. The option to "choose ecu" is just missing. The box to enter my chassis number pops up when i hit chassis "F2" but after i hit E89 and OK that window goes away and is not replaced with the "choose ecu" window. Any idea why this is happening?
Appreciate 0
      09-12-2020, 07:51 PM   #275
lexae
Private First Class
5
Rep
144
Posts

Drives: 2006 330xi 6-speed iDrive
Join Date: Jun 2012
Location: Toronto

iTrader: (5)

coding COMBOX issue

Hi there. How are you all doing today?
I am adding a combox to my car. The car does not seem to want to recognize that the module is there. When I code MEDIA with NFSexpert this is the error message that I get.
[20:57:42.843] [2020-09-12] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
[20:57:42.843] [2020-09-12] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht CMEDIAR

[20:57:42.952] [2020-09-12] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[20:57:42.952] [2020-09-12] [SERIE] SG antwortet nicht CODIERINDEX_LESEN

[20:57:45.586] [2020-09-12] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
[20:57:45.586] [2020-09-12] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht CMEDIAR

[20:57:45.696] [2020-09-12] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[20:57:45.696] [2020-09-12] [SERIE] SG antwortet nicht SG_CODIEREN


Any suggestions would be appreciated.

Thank you!
Appreciate 0
      04-18-2021, 07:04 PM   #276
Savage_Doze
New Member
Savage_Doze's Avatar
3
Rep
17
Posts

Drives: 2009 335i e90
Join Date: Apr 2021
Location: Canada

iTrader: (0)

Similar errors here as well.

2000 Error. LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
Fehler in EDIABAS oder in SG-Beschreibungsdatei SYS-0010: Job "INITIALISIERUNG' fehlerhaft CID_90
2000 Error COAPI2.CPP coapiRunCabd 6
Fehler in EDIABAS oder in SG-Beschreibungsdatei CODIERINDEX_LESEN
2000 Error COAPI.CPP coapiReadCodierIndexFromSg 5
Fehler in EDIABAS oder in SG-Beschreibungsdatei CODIERINDEX_LESEN: A_E65R
2000 Error LFCDHDIA.CPP (A_E65R.IPS/IP0) CDHapiResultText 1
Fehler in EDIABAS oder in SG-Beschreibungsdatei SYS-00l0: Job "INITIALISIERUNG' fehlerhaft CID_90
2000 Erroe COAPI2.CPP coapiRunCabd 6
Fehler in EDIABAS oder in SG-Beschreibungsdatei CODIERDATEN_LESEN
Appreciate 0
      09-15-2021, 12:43 PM   #277
wortel55
New Member
Netherlands
0
Rep
20
Posts

Drives: BMW 318i LCI E91
Join Date: Aug 2021
Location: Netherlands

iTrader: (0)

Faulty Vin code

Hello I´am Bern from holland. Drive a 318i e91 LCI: I´am new to coding with BMW.
Installed, all the files with Bimmergeeks, Updated the Daten files. When I start NCS choose profil I got these possibility's, Default profile, Factory reset, feature coding, NCS Dummy profile. On al 4 the these 4 choices the vin number is not automatically red .
https://hosting.photobucket.com/imag...=278&crop=fill
So filled in. the vin code Manual. In an earlier preview, in ncs I just looked in the program but with the obd connected. Then it gave the message wrong vincode. After that I saw somewhere that I had to ad a "W" after my vincode I thought it was strange. But I still had to do in manually , always entering vincode with the W I did get into the program. Finally i was able to read FRM. changed the trc file and set bixenon_LH to active. Saved it as man file. Then written in frm. That all went well. ; at least it was coded. When I wanted to see if it worked with my bi xenon it still flickered.https://hosting.photobucket.com/imag...=278&crop=fill

Back in NCS again had to write vin itself again and gives " vincode faulty". I don't get it anymore. Somebody Help Please, What do I do?
I also have a file "SYSDATEN.TRC" and it has a completely different vin number in it. how is that possible.https://hosting.photobucket.com/imag...=278&crop=fill

How do I get back to factory setting and start all over. I also saw that inpa, the two black dots were gone there any more. were White.

Last edited by wortel55; 09-15-2021 at 12:49 PM.. Reason: miss typing
Appreciate 0
      09-19-2021, 03:14 AM   #278
NesoX
Private
5
Rep
60
Posts

Drives: F31
Join Date: Jan 2019
Location: Germany

iTrader: (0)

Update ur Sp-data and try again
Appreciate 0
      10-18-2021, 10:38 AM   #279
wortel55
New Member
Netherlands
0
Rep
20
Posts

Drives: BMW 318i LCI E91
Join Date: Aug 2021
Location: Netherlands

iTrader: (0)

Quote:
Originally Posted by NesoX View Post
Update ur Sp-data and try again

I did and it works oke now. Thanks!
Appreciate 0
      10-22-2021, 12:45 PM   #280
NesoX
Private
5
Rep
60
Posts

Drives: F31
Join Date: Jan 2019
Location: Germany

iTrader: (0)

Quote:
Originally Posted by wortel55 View Post
I did and it works oke now. Thanks!
u are welcome
Appreciate 0
      01-31-2022, 08:08 PM   #281
orca4wd
Private
3
Rep
69
Posts

Drives: X1, Z3M
Join Date: Sep 2016
Location: Oregon

iTrader: (0)

Quote:
Originally Posted by adam_c View Post
Alright my first coding adventure has failed and I don't know now, hoping someone can help as I can no longer do anything

Setup
bimmergeeks cable
bimmergeeks standard bmw tools
ncs expert using manipulation profile from bimmergeeks

Scenario
Wanted to code window roll up with fob

Steps
Loaded NCS Expert, chose "Manipulation" profile
Downloaded the trc file and modified the line KOMFORTSCHLIESSUNG_FB to aktiv
Saved the file as .MAN
Reloaded NCS Expert in coding mode, tried uploading the changes and...
Received the following error
Attachment 1859117

Exited out of NCS Expert
Tried reloading and reading loading the CAS module (or any module) and now receive this error)
Attachment 1859118


After everything, I also noticed that my VIN was off by 1 digit, should have ended in 2 but it ended in 1 inside of NCS Expert


If I open my TRC file in NCS Dummy, I'm also getting this error
[E] 20:24:23 An error occurred while reading "C:\NCSEXPER\WORK\FSW_PSW.TRC": Unresolved function keyword "CODIERUNG_ERFOLGT". Make sure chassis and module match those of the trace file.

Hi Adam. I'm getting similar error messages after I had ECU flashed by dealer on an emission recall. I have updated sp-daten to v69 which is the latest, somehow, still can't read/write the CAS or NFRM modules. Wonder if you have a solution, please share?
Appreciate 0
      07-13-2022, 10:22 AM   #282
AntonovJR
Registered
0
Rep
1
Posts

Drives: BMW E39, BMW E87
Join Date: Jul 2022
Location: Sofia, Bulgaria

iTrader: (0)

Hello guys,
I have this issue on E87 when trying to code the car that now has cruise control $540. DSC module is reaching from INPA. Its updated and etc.

Please advice.
Attached Images
 
Appreciate 0
      09-13-2022, 03:29 PM   #283
SPDSKTR
New Member
2
Rep
6
Posts

Drives: 2009 BMW E91 328i
Join Date: Sep 2022
Location: Birmingham, AL

iTrader: (0)

I'm dealing with the same thing and it's driving me to my wits' end. I'm about ready to just pay someone to help me flash the 330i software onto my 328i (did the three-stage intake manifold swap).
Appreciate 0
      10-16-2022, 02:02 PM   #284
320iowner
Registered
0
Rep
1
Posts

Drives: E90 320i
Join Date: Oct 2022
Location: Wales

iTrader: (0)

When trying to execute a read data job from FRM for Rad2, im getting this error.

I have never used NCSexpert before..

[17:40:03.979] [2022-10-15] [SERIE] 2041 Error CDH.C CDHCheckIdent 3
[17:40:03.979] [2022-10-15] [SERIE] Falscher SG-Codierindex A_E65R: CODIERINDEX = 02h RAD2.C03: CODIERINDEX = 03

[17:40:04.085] [2022-10-15] [SERIE] 2041 Error COAPI2.CPP coapiRunCabd 6
[17:40:04.085] [2022-10-15] [SERIE] Falscher SG-Codierindex CODIERDATEN_LESEN

================================================== ==============================(2)
[17:41:35.684] [2022-10-15] [SERIE] 2041 Error CDH.C CDHCheckIdent 3
[17:41:35.684] [2022-10-15] [SERIE] Falscher SG-Codierindex A_E65R: CODIERINDEX = 02h RAD2.C03: CODIERINDEX = 03

[17:41:35.789] [2022-10-15] [SERIE] 2041 Error COAPI2.CPP coapiRunCabd 6
[17:41:35.789] [2022-10-15] [SERIE] Falscher SG-Codierindex CODIERDATEN_LESEN
Appreciate 0
      10-16-2022, 05:49 PM   #285
PichaDis11
Colonel
PichaDis11's Avatar
United_States
295
Rep
2,201
Posts

Drives: E90 N52
Join Date: Mar 2013
Location: NY

iTrader: (3)

Quote:
Originally Posted by 320iowner View Post
When trying to execute a read data job from FRM for Rad2, im getting this error.

I have never used NCSexpert before..

[17:40:03.979] [2022-10-15] [SERIE] 2041 Error CDH.C CDHCheckIdent 3
[17:40:03.979] [2022-10-15] [SERIE] Falscher SG-Codierindex A_E65R: CODIERINDEX = 02h RAD2.C03: CODIERINDEX = 03

[17:40:04.085] [2022-10-15] [SERIE] 2041 Error COAPI2.CPP coapiRunCabd 6
[17:40:04.085] [2022-10-15] [SERIE] Falscher SG-Codierindex CODIERDATEN_LESEN

================================================== ==============================(2)
[17:41:35.684] [2022-10-15] [SERIE] 2041 Error CDH.C CDHCheckIdent 3
[17:41:35.684] [2022-10-15] [SERIE] Falscher SG-Codierindex A_E65R: CODIERINDEX = 02h RAD2.C03: CODIERINDEX = 03

[17:41:35.789] [2022-10-15] [SERIE] 2041 Error COAPI2.CPP coapiRunCabd 6
[17:41:35.789] [2022-10-15] [SERIE] Falscher SG-Codierindex CODIERDATEN_LESEN
I believe you cannot read/code rad2 with kdcan cable.
__________________
Retrofits: 322, 609, 6FL, 6NR, 6VC, 2TB..
Upgrades: Bilstein B8 Eibach Spring kit
Appreciate 0
      01-28-2023, 04:51 PM   #286
trippleM
New Member
0
Rep
11
Posts

Drives: bmw 330i e90
Join Date: Jan 2023
Location: California

iTrader: (0)

Could guys tell me where the issues is and what i need to resolve issue? Im trying to code in a new frm module on ncs expert. But this is the only coding that i get error with! Please help guys
Attached Images
  
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:57 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST