[GRUESOM3]

New hood emblem. Scored a new oem
On eBay for 26$ couldn't go wrong. Of course I like to add a little strip of 3m double sided tape for extra security. The old Chinese one started fading. Here's a comparison side by side. What a difference.

[OLI77]

Originally Posted by bmdubya1198

Replaced this disgusting OFHG. It's always satisfying to find something like this that has visibly failed! Usually I replace gaskets and they look perfectly fine.

I hear you! How much coolant did you bleed out? Was it 1 gallon or more than that? I have to do this job and I am wondering.

[IllSic_Design]

Originally Posted by OLI77

I hear you! How much coolant did you bleed out? Was it 1 gallon or more than that? I have to do this job and I am wondering.

Less than 1 gallon if only removing the two hose connections, 1 at OFH and 1 at cylinder head.

[nsjames]

well since I discovered some rust in the fender it's time to find it and kill it all.

tailgate.


packed with mud


the top piece is terrifying to remove. lots of bending things way passed my comfort limit.


then it was post car wash cruise

[bmdubya1198]

Originally Posted by OLI77

I hear you! How much coolant did you bleed out? Was it 1 gallon or more than that? I have to do this job and I am wondering.

Surprisingly, I only lost a few ounces. I just clamped off the upper radiator hose and pulled it off the OFH. I left the other hose connected.
I was going to drain the coolant too, but after searching I realized it probably wasn't necessary.

[colorado.e9x]

Went for a nice mountain drive with a mix of going slow and enjoying the scenery and getting a little antsy in the twisties. Got a little too carried away going down the mountain, though. Built up some speed pretty quickly just coasting which resulted in a speeding ticket. Live and learn.

[Kev0]

Wrapped the non functional P button on the shifter with matte black 3m wrap.

[feuer]

Originally Posted by Kev0

Attachment 2324750

Wrapped the non functional P button on the shifter with matte black 3m wrap.

I just installed this same shifter lever. I wonder why they didn’t make that part properly. Wasn’t going to be to difficult considering they already had wires and board there for the other shift lights.

[F13.KENN]

Getting my new firehawk indy 500s put on the rear today. Cant wait to finally have more confidence with how the car handles.

Currently have cheap federal tires that have no sidewall reinforcement at all and are super flimsy. On the highway or any speed above 60mph the car feels like it doesnt have a sway bar in the rear and reacts super sluggish

[mecheng77]

Originally Posted by colorado.e9x

Got tired of my radio display being completely dead. Installed a new-to-me radio and matching climate control from a 2010. Wow what a difference I've been living with the dead display for over two years!

Edit: Coded LCI gongs as well.


Also does anyone know how to fix this service light? Pretty sure its for the cabin air filter. I reset it when I replaced it, not sure why its acting up now. It wont reset.

Originally Posted by colorado.e9x

Got tired of my radio display being completely dead. Installed a new-to-me radio and matching climate control from a 2010. Wow what a difference I've been living with the dead display for over two years!

Edit: Coded LCI gongs as well.


Also does anyone know how to fix this service light? Pretty sure its for the cabin air filter. I reset it when I replaced it, not sure why its acting up now. It wont reset.

Can you tell me what line to change for the lci gongs?

[mecheng77]

Originally Posted by colorado.e9x

Anyone know how to make the dash not so reflective? The previous owner treated everything in the interior with only armorall and after two years it's still shiny. After about a year of wiping with Adams interior detailer it helps a little but not enough

Originally Posted by colorado.e9x

Anyone know how to make the dash not so reflective? The previous owner treated everything in the interior with only armorall and after two years it's still shiny. After about a year of wiping with Adams interior detailer it helps a little but not enough

This is what the guys in this detailing forum recommended me. It smells great and has a matte finish


nextzett Cockpit Premium, 16.9 Oz. (500 ML) https://www.amazon.ca/dp/B0002Z2MZ4/..._rWO0EbTPSB23P

[Clammy]

Originally Posted by mecheng77

Can you tell me what line to change for the lci gongs?

In Kombi module:

HU_VERBAUT_C08 --> radiostufe_3_4

Cheers!

[colorado.e9x]

Originally Posted by mecheng77

Can you tell me what line to change for the lci gongs?

you have to recode your kombi module:
Just change the value HU_VERBAUT_C08 to radiostufe_3_4

[mecheng77]

Originally Posted by colorado.e9x

you have to recode your kombi module:
Just change the value HU_VERBAUT_C08 to radiostufe_3_4

Originally Posted by Clammy

In Kombi module:

HU_VERBAUT_C08 --> radiostufe_3_4

Cheers!

Originally Posted by colorado.e9x

you have to recode your kombi module:
Just change the value HU_VERBAUT_C08 to radiostufe_3_4

Thanks guys. Do I need to change my head unit? I have the logic 7

[mecheng77]

I switched to a silicone elbow. I'm impressed with the mod, during normal driving you don't notice a difference the car is still nice and silent.

When you drive spirited the throttle response is improved and it sounds slightly better on the top end but never loud or annoying the change is slight

[Bmw_Crazy]

Originally Posted by Kev0

Took her out for a cruise. Been like 3 weeks since I've driven her. Here's some night shots of the new cluster and blacklines sequential taillights.

Attachment 2321140
Attachment 2321141
Attachment 2321139

Nice cluster ! Explain😀

[colorado.e9x]

Originally Posted by mecheng77

Thanks guys. Do I need to change my head unit? I have the logic 7

Sure thing. And you'll need an LCI head unit to do this. It'll just disable gongs entirely if you try to code it on a Pre LCI.

[Smgs1992]

Finally got around to installing my waterpump and thermostat. Wasn't as bad as I anticipated. Definitely a few tight spots though.

[Kev0]

Originally Posted by Bmw_Crazy

Nice cluster ! Explain😀

Bought a plug n play coded one from a guy who custom make them on IG. He had different gauge faces in stock at the time ready to ship so i chose that one. M3 needles, led lights and f80 style font. I'm not on IG anymore so i forgot his IG. He's out of Florida.

[Bmw_Crazy]

Originally Posted by Kev0

Bought a plug n play coded one from a guy who custom make them on IG. He had different gauge faces in stock at the time ready to ship so i chose that one. M3 needles, led lights and f80 style font. I'm not on IG anymore so i forgot his IG. He's out of Florida.

Attachment 2325828
Attachment 2325829

Looks great 👍

[Wingnutts]

Originally Posted by Kev0

Bought a plug n play coded one from a guy who custom make them on IG. He had different gauge faces in stock at the time ready to ship so i chose that one. M3 needles, led lights and f80 style font. I'm not on IG anymore so i forgot his IG. He's out of Florida.

Attachment 2325828
Attachment 2325829

LMB335IS is his name here. He is working on a custom gauge for my 335is currently.

[Soden82]

Valve cover and gasket done today. Definitely easier 2nd time around. Took me 2.5-3 hours taking my time and running to a friends house to get some tools I didn't own. Now no vacuum leaks!