[Thermobaric]

I've had these marks on my boot lip spoiler for a while and I was hoping to try and get rid of them but I think the clear coat has been sanded too far. Am I looking at a respray/replacement? I have touch up paint and clear coat pen and a bottle too.

Those little grey spots are clear coat bubbles somehow. They just appeared a few weeks ago out of the blue. I've had the car for 18 months or so and no paint work done on the lip.

[08njSTEP]

Yup, through the clear. The base will start oxidizing as soon as clear is gone. Needs to be primed or sealed and recolored/clear. The primer/sealer is required to seal the edge of clear. Usually the best bet is prime and sand to prevent a ring showing.

[Rialas]

Never polish or sand near any edges. So easy to go through.