|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Retrofited E9X Steptronic Gear shifter
|
|
08-07-2010, 07:05 PM | #1 |
Major
88
Rep 1,404
Posts |
Retrofited E9X Steptronic Gear shifter
Finally, I have installed the modified Steptronic gear selector into my '07 335i Coupe. This project started when after purchasing this modified shifter from another forum member, only to realize later, the wiring and plugs are completely screwed up. The seller had no idea how to provide me answers of how to install it (he claimed to be an electrical engineer).
I found Rodger via After Market Bulbs Shop who sells retrofit kits of the SMG shifter for the E9X. I figured Rodger is more than capable enough to figure out a solid solution of merging the BMW 6 series Steptronic shifter wiring harness to the existing wiring harness of the Steptronic E9X. As you can tell from the pictures, it works brilliantly. The shifter is easy to shift, throws no codes, no issues, and no wiring harness pinching that may cause a short. Rodger has created a more compact circuit board than seen by Nacho26. It took only a 3-4 minutes to install. Sweet and easy. If you have any technical questions, Rodger E90post's forum name is Schulrog or go to http://www.motivemods.com/category-s/307.htm
__________________
Name: Blanca | 07 E92 | AW-Blk | ZSP | Alcon BBK | M3 Bits | VM RR Links | Koni | UUC Sways | V5 | Dinan CAI | ETS IC | Fge DV | ER CP | Cyba | Raden. Exh | Mod Step | Trunk Drawer | Perf LED Wheel | Illum Dr Sills | IS Shifter | Parrot | Philps D1S | 6000k fog | MTECH RR | CSL Trunk | Aero | Roof Spoiler | PSS on BBS RS-GT 19s
Last edited by Thumperx; 08-10-2010 at 01:03 PM.. |
08-07-2010, 08:07 PM | #2 |
No 55mph
1621
Rep 8,476
Posts |
Looks awesome
Did you cut down your shift lever as is stated on his site? Mebbe you could talk Rodger into doing Group Buy with discounts at 5 or 10 buyers?
__________________
F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
|
Appreciate
0
|
08-07-2010, 09:39 PM | #4 |
First Lieutenant
56
Rep 392
Posts
Drives: 2017 Tacoma TRD Pro
Join Date: Jul 2010
Location: Pasadena, CA
|
Looks great!
PS: your trim is beautiful. that's not stock is it? |
Appreciate
0
|
08-07-2010, 09:59 PM | #5 |
Major General
422
Rep 8,003
Posts
Drives: '08 E90 335i, '99 E36 M3
Join Date: Apr 2009
Location: Houston, TX & Atlanta, GA
|
Looks good!
|
Appreciate
0
|
08-07-2010, 11:28 PM | #7 | |
Major
88
Rep 1,404
Posts |
Quote:
My direction (and follow up suggestion to Rodger) is the place a ABS or neoprene pad between the wire loom and the stalk to prevent any shorting. I'm not sure to the consequences when returning the leased car if the stalk has been cut. I believe it will be the decision for the owner whether to cut or not. The group buy is good idea, as long there's enough interest. Ultimately, it's up to Rodger. I just happen to be first one to get one.
__________________
Name: Blanca | 07 E92 | AW-Blk | ZSP | Alcon BBK | M3 Bits | VM RR Links | Koni | UUC Sways | V5 | Dinan CAI | ETS IC | Fge DV | ER CP | Cyba | Raden. Exh | Mod Step | Trunk Drawer | Perf LED Wheel | Illum Dr Sills | IS Shifter | Parrot | Philps D1S | 6000k fog | MTECH RR | CSL Trunk | Aero | Roof Spoiler | PSS on BBS RS-GT 19s
Last edited by Thumperx; 08-07-2010 at 11:45 PM.. |
|
Appreciate
0
|
08-07-2010, 11:36 PM | #8 |
Major
88
Rep 1,404
Posts |
Thanks, the shifter boot is from the Performance Accessory Line and Popular Gray veneer wood trim panels.
For those who don't know, this shifter is available on the 2011 335 IS model with textured aluminum “glacier” trim and dark silver finish .
__________________
Name: Blanca | 07 E92 | AW-Blk | ZSP | Alcon BBK | M3 Bits | VM RR Links | Koni | UUC Sways | V5 | Dinan CAI | ETS IC | Fge DV | ER CP | Cyba | Raden. Exh | Mod Step | Trunk Drawer | Perf LED Wheel | Illum Dr Sills | IS Shifter | Parrot | Philps D1S | 6000k fog | MTECH RR | CSL Trunk | Aero | Roof Spoiler | PSS on BBS RS-GT 19s
Last edited by Thumperx; 08-07-2010 at 11:55 PM.. |
Appreciate
0
|
08-10-2010, 01:01 PM | #11 |
Major
88
Rep 1,404
Posts |
Hmm if you got one, I would glad to install it.
__________________
Name: Blanca | 07 E92 | AW-Blk | ZSP | Alcon BBK | M3 Bits | VM RR Links | Koni | UUC Sways | V5 | Dinan CAI | ETS IC | Fge DV | ER CP | Cyba | Raden. Exh | Mod Step | Trunk Drawer | Perf LED Wheel | Illum Dr Sills | IS Shifter | Parrot | Philps D1S | 6000k fog | MTECH RR | CSL Trunk | Aero | Roof Spoiler | PSS on BBS RS-GT 19s
|
Appreciate
0
|
08-10-2010, 03:16 PM | #12 |
Brigadier General
179
Rep 3,923
Posts |
looks good i wanted this at one time but now have the performance shifter. what i would really like is to have the gear numbers come up in the dash so instead of having just D it shows what gear you are in as it does when its in manual mode anyone know if this is possible.
|
Appreciate
0
|
08-10-2010, 09:30 PM | #14 | |
Major
88
Rep 1,404
Posts |
Quote:
__________________
Name: Blanca | 07 E92 | AW-Blk | ZSP | Alcon BBK | M3 Bits | VM RR Links | Koni | UUC Sways | V5 | Dinan CAI | ETS IC | Fge DV | ER CP | Cyba | Raden. Exh | Mod Step | Trunk Drawer | Perf LED Wheel | Illum Dr Sills | IS Shifter | Parrot | Philps D1S | 6000k fog | MTECH RR | CSL Trunk | Aero | Roof Spoiler | PSS on BBS RS-GT 19s
|
|
Appreciate
0
|
08-11-2010, 05:41 PM | #16 |
Colonel
112
Rep 2,589
Posts |
looks good but $370 is a bit much for a knob. DIY.
|
Appreciate
0
|
08-13-2010, 11:20 AM | #17 |
Major
88
Rep 1,404
Posts |
I was at the dealer yesterday to pick up a part, and they had a 335IS on the front lot. I checked out the height of the shifter, and yes it was shorter than mine by at least 1/2 to 3/4. I 'm still deciding whether to cut the stalk or not, but I do like the new shifter gaiter though.
__________________
Name: Blanca | 07 E92 | AW-Blk | ZSP | Alcon BBK | M3 Bits | VM RR Links | Koni | UUC Sways | V5 | Dinan CAI | ETS IC | Fge DV | ER CP | Cyba | Raden. Exh | Mod Step | Trunk Drawer | Perf LED Wheel | Illum Dr Sills | IS Shifter | Parrot | Philps D1S | 6000k fog | MTECH RR | CSL Trunk | Aero | Roof Spoiler | PSS on BBS RS-GT 19s
|
Appreciate
0
|
08-13-2010, 11:53 AM | #18 |
Brigadier General
179
Rep 3,923
Posts |
|
Appreciate
0
|
08-13-2010, 01:38 PM | #19 |
Lieutenant
34
Rep 527
Posts |
if there is a gb count me in as well but is there a shift lock on the knob or its like the smg knobs where you can accidently push the knob into r or w/e
but this with a alcantara manual boot will look amazing! thats the look im going to go for =D
__________________
11 E90 ///M ZCP
12 Range Rover Autobiography 06 Porsche Cayenne S 09 E92 335xi M-sport SOLD 08 E90 328xi Gone but will never be forgotten! |
Appreciate
0
|
08-13-2010, 08:19 PM | #20 | |
Captain
40
Rep 720
Posts |
Quote:
I'm going to do this mod after OSS and m-tech front.. |
|
Appreciate
0
|
08-14-2010, 03:27 AM | #21 |
First Lieutenant
14
Rep 318
Posts |
The 370 isn't just for the knob. It's for the knob, harness and custom built circuit board to make all this work. Also, the harness fits perfectly under the baseplate so there are no tangled wires and functionality is 100% guaranteed
|
Appreciate
0
|
Bookmarks |
|
|