[The_DDub]

I got my NFRM and went through it. I'd like to up the voltage on my AEs. I found PWM_SL_V set to wert_02. Can anyone provide some insight? I will open up NCS Dummy to see what other values are there too.

[Pseudo Nim]

Originally Posted by The_DDub

I got my NFRM and went through it. I'd like to up the voltage on my AEs. I found PWM_SL_V set to wert_02. Can anyone provide some insight? I will open up NCS Dummy to see what other values are there too.

Hey - do you have factory installed paddleshift bychance? Could you dump your complete VO if you do?

[rubdom]

Originally Posted by Pseudo Nim

Hey - do you have factory installed paddleshift bychance? Could you dump your complete VO if you do?

I have paddle shift factory installed. How do I dump my VO for you?

[Pseudo Nim]

Originally Posted by rubdom

I have paddle shift factory installed. How do I dump my VO for you?

Load the 'expert' profile and go into your coding as if you were going to be editing some function. Click 'BACK'. You should have a button called 'Enter FA'. Click that; it will ask for your chassis; click OK, it will show you a VIN prompt; click OK. You will get a new box that says "ENTER FA". In there are ALL of your VO items. There's no way to copy/paste it, so press ALT+PrintScreen to capture the current window, paste it into a jpeg file, then scroll down and repeat until you went through all the options. Then click CANCEL and back out of there.

Appreciate it very much, thanks!

[edit] here is the PDF of the operation.

[rubdom]

Originally Posted by Pseudo Nim

Load the 'expert' profile and go into your coding as if you were going to be editing some function. Click 'BACK'. You should have a button called 'Enter FA'. Click that; it will ask for your chassis; click OK, it will show you a VIN prompt; click OK. You will get a new box that says "ENTER FA". In there are ALL of your VO items. There's no way to copy/paste it, so press ALT+PrintScreen to capture the current window, paste it into a jpeg file, then scroll down and repeat until you went through all the options. Then click CANCEL and back out of there.

Appreciate it very much, thanks!

[edit] here is the PDF of the operation.

Here are all the screen shots. Hope this helps!

[Pseudo Nim]

Originally Posted by rubdom

Here are all the screen shots. Hope this helps!

Thank you very much! Now to analyse how this compares to mine.

[outie]

Originally Posted by Pseudo Nim

Thank you very much! Now to analyse how this compares to mine.

Looks like it's this one actually:
W 2XA MFUNK_LENKRAD MFUNK_LENK_NEU //Sport-Lederlenk.+Schaltwip.+Multif.

$2XA (X is not a placeholder. It's exactly that.)

I guess 7XA is for M3.

[Pseudo Nim]

Promising. So I will add this, then I'll code PADDLES to wert_01 in EGS, let's see what happens, hehe.

[The_DDub]

Originally Posted by Pseudo Nim

Hey - do you have factory installed paddleshift bychance? Could you dump your complete VO if you do?

Sorry bud, I have a 328i E90, no factory paddle shifters for me. I don't think it was even an option. It is on the 328i LCI E90s though.

Who has coded their AEs to run at higher voltages than 12v?

[Pseudo Nim]

Originally Posted by rubdom

Here are all the screen shots. Hope this helps!

ok ... I must sadly report lack of success so far. I added $2XA to CAS and NFRM and coded PADDLES to wert_01 in EGS..... and lost DS and M again. Doh!!!

Could you post your complete dump of FSW_PSW.TRC? I wonder what else is the difference. I'll compare VOs and individual settings. If you have individual per-module dumps, that's even better, but a single dump of FSW_PSW is good enough too I'll PM you my email if you don't mind.

Thanks again.

[outie]

Originally Posted by Pseudo Nim

ok ... I must sadly report lack of success so far. I added $2XA to CAS and NFRM and coded PADDLES to wert_01 in EGS..... and lost DS and M again. Doh!!!

Could you post your complete dump of FSW_PSW.TRC? I wonder what else is the difference. I'll compare VOs and individual settings. If you have individual per-module dumps, that's even better, but a single dump of FSW_PSW is good enough too I'll PM you my email if you don't mind.

Thanks again.

Not sure if you coded out your original steering wheel from the VO. If not you can try that too. $240? $255?

[leceur]

I have a major issue and could really use some help, PLEASE!
I have been modifying files and adding things to the VO without any problems.
I did some coding on someone else's car yesterday and now have the following problem. I can still code modules liek before (amde some changes to CAPPL without problems).
Now I need to remove 2 devices and add 1 to the VO. When I read the car however I get the FA number of the car I coded yesterday, so not my car??? I can change the FA to mine, but when I press back I get:

ERROR! Modul: CVT_PROC.C, ProcNr: 02, LineNr: 10, ErrorNr: 106.
       CIC_C03_CDM_just

ERROR! Modul: COAPI.CPP, Proc: coapiGetFswPswFromAsw, LineNr: 02, ErrorNr: 1000
COAPI-1000: error

I have completely deleted the NCS Expert folders and re-installed them but nothing helps. How can it read the wrong FA code......?
PLEASE help as I need to add $672 for my DENSION gateway 500 to work.
Thanks!

[DESI4life10]

Originally Posted by Pseudo Nim

ok ... I must sadly report lack of success so far. I added $2XA to CAS and NFRM and coded PADDLES to wert_01 in EGS..... and lost DS and M again. Doh!!!

Could you post your complete dump of FSW_PSW.TRC? I wonder what else is the difference. I'll compare VOs and individual settings. If you have individual per-module dumps, that's even better, but a single dump of FSW_PSW is good enough too I'll PM you my email if you don't mind.

Thanks again.

Dont convert the paddle like to wert_01

Keep it at default which i believe is wert_00 and just install the VO. Gotta take it one step at a time so you can see where things changes.

[DESI4life10]

Originally Posted by rubdom

Here are all the screen shots. Hope this helps!

Thanks rubdom for posting this. Will compare it to the list I have.

[DESI4life10]

Originally Posted by Pseudo Nim

ok ... I must sadly report lack of success so far. I added $2XA to CAS and NFRM and coded PADDLES to wert_01 in EGS..... and lost DS and M again. Doh!!!

Could you post your complete dump of FSW_PSW.TRC? I wonder what else is the difference. I'll compare VOs and individual settings. If you have individual per-module dumps, that's even better, but a single dump of FSW_PSW is good enough too I'll PM you my email if you don't mind.

Thanks again.

I wonder if there is a different vo code used for the transmission with shifters?

I will look at rubdom VO and see what the difference is.

[Pseudo Nim]

Originally Posted by DESI4life10

I wonder if there is a different vo code used for the transmission with shifters?

I will look at rubdom VO and see what the difference is.

Cool, thx. Btw: I did remove the existing steering from mine (255), and I did do one step at a time, testing in between. Sequence was:

- edit CAS, remove 255, add 2XA, turn off ignition, turn back on, test (no shift in D/DS)
- edit NFRM, do above, still nothing
- code EGS,lost shift
- pt it bask, shifts are back by console shifter only, no paddles.


I guess let's compare VOs.

Btw: I discovered that you CAN get a text dump of the VO - when you view it in that window above, a file called "FA.TRC" is created alongside FSW_PSW that contains the complete VO.

[DESI4life10]

Checked rubdom VO and $2XA is the only code that talks about paddles.

$704 is there but that is Sport suspension.

[rubdom]

Originally Posted by Pseudo Nim

ok ... I must sadly report lack of success so far. I added $2XA to CAS and NFRM and coded PADDLES to wert_01 in EGS..... and lost DS and M again. Doh!!!

Could you post your complete dump of FSW_PSW.TRC? I wonder what else is the difference. I'll compare VOs and individual settings. If you have individual per-module dumps, that's even better, but a single dump of FSW_PSW is good enough too I'll PM you my email if you don't mind.

Thanks again.

I can send to you when I get to work no problem. I'll email you.

[onebadmofo]

Hey guys, I have quite a collection of FRM dumps from all kind of cars, is that something you might be interested in?

[Pseudo Nim]

Originally Posted by onebadmofo

Hey guys, I have quite a collection of FRM dumps from all kind of cars, is that something you might be interested in?

Sure! If you have a pair of as close as possible cars, one with paddles, one without, I'd love to get that as well, that together with rubdom's dump would give me more to go on.

[DESI4life10]

Originally Posted by onebadmofo

Hey guys, I have quite a collection of FRM dumps from all kind of cars, is that something you might be interested in?

That would be sweet. Thanks

[onebadmofo]

Alright, they're on my coding laptop at home, I'll post em once I get home.