|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Differences between injectors with index 12
|
|
01-29-2023, 01:37 PM | #1 |
Enlisted Member
4
Rep 31
Posts |
Differences between injectors with index 12
Hi, I have bought 2 injectors with index 12 - the part number: 1353 7585261-12.
I have noticed that there are differences in other numbers - on the metallic material: E0 vs C0 - next to the QR code: 593201 vs 580237, 140926 vs 170316 What those numbers mean ? Moreover one metallic ring looks different. I guess that those injectors may have different production year. It is possible to identify the production year based on the above numbers ? Last edited by Irbis; 01-29-2023 at 01:43 PM.. |
01-29-2023, 04:48 PM | #2 |
Second Lieutenant
154
Rep 214
Posts |
593 201 vs 580 237 are the measured flow characteristics of that particular injector. These values need to be programmed into the DME when you install the injectors. These will be unique to each injector. That's all I know.
|
Appreciate
1
feuer4275.50 |
01-30-2023, 07:01 AM | #3 |
Brigadier General
2001
Rep 3,731
Posts |
That metallic ring is an injector decoupler ring. They all need to have those...if they are missing, you will need to buy some more.
https://www.fcpeuro.com/products/bmw...AaAonnEALw_wcB Also....make sure you replace all of the tip seals on the injectors with new ones before you install them. https://www.fcpeuro.com/products/bmw...oaAqebEALw_wcB
__________________
2007 335i, BMS DCI, BMS Chargepipe w/Tial BOV, ARM Catless Downpipes, silicone inlets, Bilstein B12 Prokit Suspension, Whiteline subframe bushings, Front/Rear M3 control arms, G-Plus FMIC, Stage 2 LPFP, Custom E40 tune by Justin (V8Bait), xHP stage 3 transmission flash, RB Two Turbos....10.90 @ 128mph
|
Appreciate
0
|
Bookmarks |
|
|