E90Post
 


Studio RSR
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > AUDIO/VIDEO + BLUETOOTH + Electronics/Alarm/Software > broken FRM3 connector tab/driver window switch issue



Reply
 
Thread Tools Search this Thread
      09-08-2020, 04:02 PM   #1
Seaneezy
New Member
8
Rep
24
Posts

Drives: 2010 e90 335i
Join Date: Nov 2016
Location: San Francisco, CA

iTrader: (0)

broken FRM3 connector tab/driver window switch issue

Was trying to install my recoded FRM3 and applied too much pressure to the top 51-pin connector (X14261) that I broke the locking tab/pin/clip off of the connector. Now the connector is pretty much stuck in there. Being impatient I put in the other connectors to see if the module worked anyways. Turn signals and lights work, and every window switch works except for the driver's window which is obviously the most important seeing as my A/C is not holding pressure and its regularly 105F+ in northern california atm.

Looking at https://www.bmwgm5.com/Footwell_Module_Connections.htm , I notice there are 5 pins regarding the drivers power window for the specific connector I broke the tab for. To check these pins I need to get the connector off.

So my questions are:
How can I get this connector off safely?
Is there a P/N for a replacement connector/locking tab or should I scour ebay for a used one?
Appreciate 0
Reply

Bookmarks

Tags
broken, connector, driver, e90, frm, switch, window

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:55 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST