[VccE92m3]

I recently replaced a bad rocker arm but in doing so ever since i originally took of the valve cover it has not been able to start. I have ista and it’s not throwing any codes that would hinder its ability to turn over. It’s getting spark and fuel, I have tried many different things but cannot seem to find the problem. Anyone know some possibilities?

[dmckmc]

had a fuse in the e-box/dme box blow when I changed a valve cover resulting in a no start. there is a small, 5-fuse holder in the dme box, i can't remember which one blew but easy to see. not sure what i did or didn't do to cause it. likely ground or powered something that shouldn't have been.

battery has to be disconnected before removing any grounds (fuel injector) or gremlins will creep in.

[VccE92m3]

Originally Posted by dmckmc

had a fuse in the e-box/dme box blow when I changed a valve cover resulting in a no start. there is a small, 5-fuse holder in the dme box, i can't remember which one blew but easy to see. not sure what i did or didn't do to cause it. likely ground or powered something that shouldn't have been.

battery has to be disconnected before removing any grounds (fuel injector) or gremlins will creep in.

Yeah one of the fuses blew but it has been replaced and still no start