|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
WTS N54 335i Manual Swap Kit out of 08 335i 8 bolt crank
|
|
02-23-2022, 12:53 AM | #1 |
Private First Class
32
Rep 190
Posts |
WTS N54 335i Manual Swap Kit out of 08 335i 8 bolt crank
Located 08901 Nj. Here I have a transmission manual swap kit for e9x and possibly e8x? in good condition. Was pulled out of a unknown mileage 08 335i w bad motor and smashed on the passenger side. The clutch is still oem and decent condition. The car was bone stock. Here is the list of things you will get. • Transmission w slave, fork, pin and bolts • Flywheel with bolts • Clutch and pressure plate w bolts • Pedal assy w master clutch cylinder including the cables for brake and safety ( check pics ) • Shifter assembly with shifter rod and pins. ( Id do shifter rebuild kit ) • MSD81 ecu • Front portion of the driveshaft w hardware • Trans mount with good bushings • Clutch lines from firewall with grommet and clips and all the pins and hardware. • Reverse light cable. I pulled it from the ecu connector, so all you gotta do is click the pin back into the connector and attach the ground with all the other grounds that there is. • Shifter rubber grommet and center console pad. This kit is complete with almost all of the hardware included and ready to be swapped. Dont bother me please with anything lower than my asking price. FIRM! Thank you for checking out! Prefer local! 1cholic is fastest way to reach on ig
__________________
|
Bookmarks |
|
|