[dtm@heart]

I know you're gonna get a load of torque with the titan motor, but how are you gonna compensate for the low rev range? Do you know what trans are you going to go with yet?

[Mark Fatlace]

I have a friend that's done it. Low Rev Range isn't a problem at all. As far as tranny, G35 Tranny.

Originally Posted by dtm@heart

I know you're gonna get a load of torque with the titan motor, but how are you gonna compensate for the low rev range? Do you know what trans are you going to go with yet?

[PlannBee]

Thats pretty flush.
Glad you went with a squared setup on your wife's xi. A staggered fitment wouldnt be too ideal.
Go with the 25mm spacer!
Then your wife would be gangsta!
Tell me how many ladies out there are riding on a hellaflush fitment? lol

[catch]

perfect fitment!

[BOOSTED4DR]

Yo wagon is sickk ...

[Derek Zoolander]

Reverse rake kills it, but nice work.
Even though you're 9.5" all around, your tire size ratios are very different (unless you meant 30 series rear, not 35). Are you concerned about this with the xDrive at all?
Does anyone know if E91 rear fenders are the same as E90s?

[dtm@heart]

Mark did you roll or pull front fenders? Seriously considering trying to do a 19x9.5 +22 square on my daily e90. Do you think it's worth it? It looks worth it...

[Mahhvinn]

Great stuff Mark! I knew you were going to make the wagon hellaflush, sooner or later. hahah.

[BKV122]

Looks sweet!
I love seeing wagons modded

[e90LCI]

[dtm@heart]

Originally Posted by e90David

when is it going to be done? a hellaflush wagon would be sick!

http://fatlace.com/hellaflush/theflushness/bmw-e91.html

[shragon]

Originally Posted by dtm@heart

http://fatlace.com/hellaflush/theflushness/bmw-e91.html

+1

read that yesterday

[remmib]

Originally Posted by dtm@heart

http://fatlace.com/hellaflush/theflushness/bmw-e91.html

Well, ET-3 and 265 tires looks non drivable from that pics. Looks like the fender sits on top of the tire.

And in those pics the different between ET7 and ET-3 looks huge, but that could be the angle of the ET7 pics.

[Mark Fatlace]

Ok, so here's the final setup where I feel comfortable with and I have no issues rubbing, etc. For those of you figuring out offsets and wheel sizing you can refer to this but please use it knowing my style is definitely different than most. The rear can fit with 1mm clearance but if you do get a flat tire, you'd better stop cause the tire will screw up your fender. I've never had this issue with my tires/wheels on my drift car and never had a blowout so just take precaution.

I tried 3 setups in various ways. 15mm, 20mm, 25mm H&R Spacers and two size tires from Toyo's T1R line. 265/35/19 & 255/35/19.

Front
19x9.5 +22 with 235/35/19 = fits. No fender rolling needed. If you're too slammed, then you may have an issue trying to get out of a driveway that's mega steep but with this M3 bumper that sits mighty high off the ground, you can probably just go straight out instead of doing the super crawl out of the driveway maneuver.

Rear
25mm + 265/35/19 = doesnt fit. major pull needed. square tire, no stretch.
25mm + 255/35/19 = doesnt fit but can. more than minor pull. semi stretch
25mm + 235/35/19 = fits. Flatten sidewall with fender roller. With this setup , you're going to be running same tire size as up front. Nothing wrong with it and it's definitely suggested with an Xi so if you're running an Xi, go for it.

20mm +255/35/19 = does fit but you'll need to massage that rear fender with fender roller. semi stretch
15mm +255/35/19 = fits great. flaten sidewall with fender roller. semi stretch.

Final choice. 15mm w/ 255/35/19. (this means the final rim size is 19x9.5 +7)

I'm not too worried about xdrive. Tire Height is what is most concerned with driving an Xi. With this setup, theyre almost at the same height with the front being 25.5 and the rear being 26 overall diameter. I just lowered the rear 1/2" and sets it correct. I've had quattros slammed and never had an issue. I'll post up more photos soon.

(now i have 25mm and 20mm spacers for sale!

[Mark Fatlace]

NEW PHOTOS ON PAGE 1

Originally Posted by e90David

+1 my offset is just as low in the rear and i'm running on 225/40 probably going down to 215/40 soon. + what did you do about the bracket where the fender/bumper meets?

I grinded the metal where the bumper meets like 1/4 inch. No rub with the 255s.

[yamazaho]

Damn sick ass wagon, love it!!!

[PaulTheHero]

Wow im in loveeeee thats one hell of a sweet e91

[Mark Fatlace]

Originally Posted by e90David

yeah, i did the same. are you selling those 25mm spacers?

yes, the 20mm and the 25mm. I'll take some photos of them and put them in the classifieds later today.

[MassBimmer]

Wow, definitely different and looks awesome!!

[Tallest]

had to be e91 of the month or smth... sick car, needs may be blacklines only for the final touch.

[BillLee]

looks real good

[E90PWR]

when you mention 255/35/19 & 265/35/19
do you mean to say 255/30/19 & 265/30/19
?