[blackedout330i]

After fixing some issues I am getting a P1624 error. It puts the car into limp mode and I cant accelerate much at all. If I shut the car down and restart it works just fine. The two codes is threw was

P110D
P1624

Any help on how to diagnose this issue? From what I've searched it could be either a thermostat issue or pedal controller?

[hassmaschine]

P-codes mean nothing to me. Got a BMW scanner?

[blackedout330i]

Originally Posted by hassmaschine

P-codes mean nothing to me. Got a BMW scanner?

hassmaschine I'm working on getting INPA to work but I cant get it to load yet/connect. Comes up with that error 18 code. Working more on it today just hot as balls sitting in a car in a garage in 90deg weather lol

[E92William]

You're gonna want to scan this with a proper scanner. As of now I'd be more inclined to say it's a pedal issue but who knows if it's a valvetronic issue and it's throwing a code for the throttle because that's what it's using as a backup. The valvetronic goes full lift and shuts down if it has a fault, so your engine speed will be controlled by the tb.

[PhaseP]

Originally Posted by blackedout330i

After fixing some issues I am getting a P1624 error. It puts the car into limp mode and I cant accelerate much at all. If I shut the car down and restart it works just fine. The two codes is threw was

P110D
P1624

Any help on how to diagnose this issue? From what I've searched it could be either a thermostat issue or pedal controller?

What were the issues you fixed? Did they involve removing throttle body electrical connector under intake manifold, or anything to do with gas pedal wiring or harness?

First code says throttle body sensor, 2nd code says gas pedal sensor supply (electrical I suppose) From Bentley manual.