[Amitt]

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

-BC Racing I-18BR - BMW BR Series Coilover Kit (E92 E93)

-53mm Dampers (larger then the competition)
-Fixed Cup/Locking Collar Design
-Full pillowball mounts in the front & rear (where applicable)
-Rubber inserts built in to keep the noise at a minimum.
-30 levels of damping adjustment (compression/rebound)
-Separate height adjustment
-Adjustment knob clicks at each position so you know where you're at

-These fit 328/335/335is E92 & E93s.

They have about ~9,000 miles on them. You will need to get new adjustable end-links, BC sells them on their website. Price is shipped.

Pics: https://drive.google.com/open?id=1Qx...pW2ybG0Kh8q_Lk

[Amitt]

Bump

[Amitt]

Bump obo

[RockChalkKU]

I am looking at the difference between the E90 set and E92, is it just spring rates?

[Amitt]

Originally Posted by RockChalkKU

I am looking at the difference between the E90 set and E92, is it just spring rates?

The E90 have a 7k front spring rate while this set has 8k. The rears are the same. However, i'm not 100% sure if there are any other differences.

[Amitt]

Bump

[TheMidnightNarwhal]

Why new end link? Because the mount is lower or higher on the strut?

[Amitt]

Originally Posted by TheMidnightNarwhal

Why new end link? Because the mount is lower or higher on the strut?

These coilovers come with them brand new, however I did not have my stock ones when I swapped back to stock suspension. From what I was told, they are needed because they change the mounting location and help with camber plate adjustments.

[Amitt]

Originally Posted by TheMidnightNarwhal

Why new end link? Because the mount is lower or higher on the strut?

These coilovers come with them brand new, however I did not have my stock ones when I swapped back to stock suspension. From what I was told, they are needed because they change the mounting location and help with camber plate adjustments.