LA: HELP Split Sec AIC1 programming

Jeremias · 11-28-2021, 10:15 PM

Please can anyone help me program my AIC1? I bought it second hand from this forum and there was nothing programmed on it. Can anyone help me in the LA area????? I’m ready for full e85 and this is the very last step!

_N54 · 11-30-2021, 09:04 AM

Do you have the AIC software installed and the wire to connect to a laptop?

Jeremias · 11-30-2021, 11:55 AM

Quote:

Originally Posted by _N54

Do you have the AIC software installed and the wire to connect to a laptop?

I have the software and cord to connect to the AIC1. I don't have the map or skills to load my own program. Any help is GREATLY appreciated. I should have just bought one with a preloaded map

_N54 · 11-30-2021, 02:02 PM

Quote:

Originally Posted by Jeremias

Quote:

Originally Posted by _N54

Do you have the AIC software installed and the wire to connect to a laptop?

I have the software and cord to connect to the AIC1. I don't have the map or skills to load my own program. Any help is GREATLY appreciated. I should have just bought one with a preloaded map

I'm in Los Angeles and I can load it with teamviewer if you have a laptop ready to go. I have a few AIC maps, but you gotta really get a proper one from your tuner. Shoot me a private message. Even if teamviewer doesn't work maybe you can swing by my area.

Jeremias · 12-03-2021, 03:44 PM

I think I have an idea of the problem now. At idle and when the car is off the program reads 5 psi and fuel is coming out of the injectors which is causing super rough idle. I think the input settings may need to be changed. Here are my settings:
1. Aux Input Settings:
-Aux input A
--Coefficient a=0
--Coefficient b=1
---Name: Air temp
-Aux input B
--Coefficient=0
--Coefficient=1
---Name: Maf
-Aux input C
--Coefficient a=0
--Coefficient b=1
---Name: o2
-Aux input D
--Coefficient a=0
--Coefficient b=1
---Name: Throttle

2. Engine
-Cylinders=6 Cylinders
-Engine Type=4 Stroke

3. System Settings
-Display Mode
--Gauge Pressure
-Application
--Additional Injector Controller

4. Output Settings
-PWM Mode=Pressure 0 to 30 PSI/3 vdc FS
-Output A mode=Aux Fuel pump with fixed start time
-Output B mode=Over RPM and Pressure
-Output C mode=Inj A andB over /latched
--Over RPM=6000
--Over Pressure=17.1
--Over INJ%=90
--Fuel Pump start pressure Psi=-1
--Fuel Pump run time=3
--Fuel Pump startup time=120

Can anyone let me know what these settings should be?

11-28-2021, 10:15 PM	#1
Jeremias is DIY in Cali still a thing? 0 Rep 23 Posts Drives: 335is E93 Join Date: Oct 2020 Location: Ventura, CA iTrader: (0)	LA: HELP Split Sec AIC1 programming Please can anyone help me program my AIC1? I bought it second hand from this forum and there was nothing programmed on it. Can anyone help me in the LA area????? I’m ready for full e85 and this is the very last step!
	Appreciate 0 Tweet Quote

11-30-2021, 09:04 AM	#2
_N54 Captain 300 Rep 884 Posts Drives: 335d Join Date: Mar 2020 Location: USA iTrader: (0)	Do you have the AIC software installed and the wire to connect to a laptop? __________________ 2013 335is - sold 2011 335d
	Appreciate 0 Quote

12-03-2021, 03:44 PM	#5
Jeremias is DIY in Cali still a thing? 0 Rep 23 Posts Drives: 335is E93 Join Date: Oct 2020 Location: Ventura, CA iTrader: (0)	I think I have an idea of the problem now. At idle and when the car is off the program reads 5 psi and fuel is coming out of the injectors which is causing super rough idle. I think the input settings may need to be changed. Here are my settings: 1. Aux Input Settings: -Aux input A --Coefficient a=0 --Coefficient b=1 ---Name: Air temp -Aux input B --Coefficient=0 --Coefficient=1 ---Name: Maf -Aux input C --Coefficient a=0 --Coefficient b=1 ---Name: o2 -Aux input D --Coefficient a=0 --Coefficient b=1 ---Name: Throttle 2. Engine -Cylinders=6 Cylinders -Engine Type=4 Stroke 3. System Settings -Display Mode --Gauge Pressure -Application --Additional Injector Controller 4. Output Settings -PWM Mode=Pressure 0 to 30 PSI/3 vdc FS -Output A mode=Aux Fuel pump with fixed start time -Output B mode=Over RPM and Pressure -Output C mode=Inj A andB over /latched --Over RPM=6000 --Over Pressure=17.1 --Over INJ%=90 --Fuel Pump start pressure Psi=-1 --Fuel Pump run time=3 --Fuel Pump startup time=120 Can anyone let me know what these settings should be?
	Appreciate 0 Quote