[bluewater328]

Originally Posted by unrulyteach

Iil bit from max height and i think it's still too low
As the rear wheel rubs the fender/bumper when coming off driveway

Suddenly B12 with Powertech inserts and E30 spring pads seems like a good decision.

[unrulyteach]

Originally Posted by bluewater328

Suddenly B12 with Powertech inserts and E30 spring pads seems like a good decision.

Haha nah I'm running aggressive setup 19x10 et30, just need to get the alignment and camber dialed in

[bluewater328]

Originally Posted by unrulyteach

Haha nah I'm running aggressive setup 19x10 et30, just need to get the alignment and camber dialed in

Staggered. Just sayin....

[unrulyteach]

Originally Posted by bluewater328

Staggered. Just sayin....

What's rear setup tire size and wheel specs i had msport springs with b8

[bluewater328]

Originally Posted by unrulyteach

What's rear setup tire size and wheel specs i had msport springs with b8

BMW 437m
19x9 et 29 front
245/35/19

19x10 et 40 rear
275/35/19

B12 with Powertech 427 inserts and one E39 10mm pad in rear. E30 Spring Perches up front for added height.

[unrulyteach]

Originally Posted by bluewater328

BMW 437m
19x9 et 29 front
245/35/19

19x10 et 40 rear
275/35/19

B12 with Powertech 427 inserts and one E39 10mm pad in rear. E30 Spring Perches up front for added height.

Got part numbers for the rear inserts and pics? I'm intrigued. Front sits how i want it doesn't rub i hav no issues at all

[bluewater328]

Originally Posted by unrulyteach

Got part numbers for the rear inserts and pics? I'm intrigued. Front sits how i want it doesn't rub i hav no issues at all

PFR5-427 Powerflex Ride Height Adjuster Shim (You may have to buy from the UK as this was really made as a fix for the bias because they are "wrong" , I mean right-hand drive.) This gets inserted into the exisitng top spring shim under the top mount that goes into the chassis.
https://www.ebay.com/itm/PFR5-427-Po...72.m2749.l2649

https://www.powerflex.co.uk/product-...0ride%2Dheight.

BMW Coil Spring Shim (10mm) - Genuine BMW 33531136387
https://www.fcpeuro.com/products/bmw...mm-33531136387

(lots of places you can buy these...there are other height options as well. So you just use the one that gives you the height you want. Just need to cut out the middle to about 40mm diameter and get slipped over the top mount that goes into the chassis).
https://www.fcpeuro.com/products/bmw...ar-33531136386
https://www.fcpeuro.com/products/bmw...mm-33531091599