|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
About replace a used instrument cluster
|
|
09-30-2019, 06:35 AM | #1 |
New Member
1
Rep 7
Posts |
About replace a used instrument cluster
Hi, After I installed a used cluster and coded with ncs-expert. The cluster is working well in my e90, but it dont have the BC menu like the photo below. Can I know how to code it out?
|
11-11-2019, 10:42 AM | #3 |
Private
11
Rep 85
Posts |
I thought you needed to have the vins aligned in the cluster to the car in order to code... If the vins are not aligned I don't think you can go any further someone please correct me if there is a work around
|
Appreciate
0
|
11-11-2019, 01:51 PM | #4 |
Captain
181
Rep 778
Posts |
That is correct, you need to virginize the used cluster to be able to code it to the car. If you install a used cluster into a car and try to code KOMBI to the car, it'll fail.
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|