[E90gone]

Originally Posted by LMB335IS

Should be no problem. If for some reason you don't like the pedal feel you can get a used M3 MC off of Ebay for under $100 and it's PnP as well. Need those 16/17's for the rear drag setup do ya?

Well the cats out of the bag now. 15" rears

[feuer]

Originally Posted by E90gone

Well the cats out of the bag now. 15" rears

Is been out for a while, 328i caliper with either e34 525i rear rotor or x1 2.8i rear rotor. I have share this info last year.

[E90gone]

Originally Posted by feuer

Is been out for a while, 328i caliper with either e34 525i rear rotor or x1 2.8i rear rotor. I have share this info last year.

Lol, I meant that's my plan. Not that I came up with it.

[wshgrntd]

What if you use the f30 rear hubs for the rear of the e90.. are they interchangeable?

[feuer]

Originally Posted by E90gone

Lol, I meant that's my plan. Not that I came up with it.

I honestly don't see why 15" is being pushed, not significant gains vs 16" that a lot easier to fit.

Originally Posted by wshgrntd

What if you use the f30 rear hubs for the rear of the e90.. are they interchangeable?

No, and even if it was not cost efficient, so forget about it.

[wshgrntd]

i want the rears but dont trust myself to cut into it....

[E90gone]

Originally Posted by feuer

I honestly don't see why 15" is being pushed, not significant gains vs 16" that a lot easier to fit.

No, and even if it was not cost efficient, so forget about it.

Larger side wall and will have better tire options with 15's

[wshgrntd]

Originally Posted by feuer

I honestly don't see why 15" is being pushed, not significant gains vs 16" that a lot easier to fit.

No, and even if it was not cost efficient, so forget about it.

I found this would they mount up?
http://www.ebay.co.uk/itm/1119454220...397&rmvSB=true

[feuer]

Originally Posted by wshgrntd

I found this would they mount up?
http://www.ebay.co.uk/itm/1119454220...397&rmvSB=true

I don't know, you would be the first to try.

[arciga18]

ECS Tuning just came out with a plug and play solution for fronts and rears:

Get ready to drool.

http://www.e90post.com/forums/showth...6#post21158286

[geost]

Originally Posted by arciga18

ECS Tuning just came out with a plug and play solution for fronts and rears:

Get ready to drool.

http://www.e90post.com/forums/showth...6#post21158286

I would love to get the yellow kit: https://www.ecstuning.com/b-ecs-part...9607ecs01akt9/

But the price And I need rears soon...

[6ixSpd]

Wow that's an insane price for a BBK for these cars. Looks cool though.

[arciga18]

I agree on the price...... :thumb down,

The factory F30 performance brake kit retails for around $2,200- $2800 including the rear BMW performance rotors. Therefore it seems like ECS tuning wants an extra $1,600.00 for the caliper brackets that they designed for the rear, and the two piece rotors.

I might be oversimplyfing this a lot but I haven't been able to really break down the package.

Maybe they will sell me just the caliper brakes, brake lines???

[LMB335IS]

Originally Posted by arciga18

I agree on the price...... :thumb down,

The factory F30 performance brake kit retails for around $2,200- $2800 including the rear BMW performance rotors. Therefore it seems like ECS tuning wants an extra $1,600.00 for the caliper brackets that they designed for the rear, and the two piece rotors.

I might be oversimplyfing this a lot but I haven't been able to really break down the package.

Maybe they will sell me just the caliper brakes, brake lines???

If you're patient and scour the internet this setup can easily be had for under $2k. I purchased the kit in Phoenix Yellow for just that including rear rotors and spent less than $100 for a used M3 master cylinder.

[feuer]

Originally Posted by arciga18

I agree on the price...... :thumb down,

The factory F30 performance brake kit retails for around $2,200- $2800 including the rear BMW performance rotors. Therefore it seems like ECS tuning wants an extra $1,600.00 for the caliper brackets that they designed for the rear, and the two piece rotors.

I might be oversimplyfing this a lot but I haven't been able to really break down the package.

Maybe they will sell me just the caliper brakes, brake lines???

Search Ebay and the classifieds on e90/f30/80post
For approximately $2500 total you can have these on your car, installed, brand new.

[9mmkungfu]

It seems that most of this discussion is centered around the 370mm F30 setup. I understand the 340mm F30 setup is also considered an upgrade on the E90. Are any of you running the 340mm setup on the E90? Apologies if I missed this from previous posts, just looking for feedback.

[arciga18]

Originally Posted by 9mmkungfu

It seems that most of this discussion is centered around the 370mm F30 setup. I understand the 340mm F30 setup is also considered an upgrade on the E90. Are any of you running the 340mm setup on the E90? Apologies if I missed this from previous posts, just looking for feedback.

I'm going with the 340mm setup soon on my E90 (328i). i can have some comments in a few weeks.

[9mmkungfu]

Originally Posted by arciga18

I'm going with the 340mm setup soon on my E90 (328i). i can have some comments in a few weeks.

Installed this past Saturday.

[arciga18]

Originally Posted by 9mmkungfu

Installed this past Saturday.

I like the Sticker. They look beefy.

What wheels are you running?

[9mmkungfu]

Originally Posted by arciga18

I like the Sticker. They look beefy.

What wheels are you running?

Thanks! Forgestar F14 wheels, Michelin PSS rubber.

[feuer]

Originally Posted by slonik

ouch, sorry, i misunderstood you.
this is my modified calipers - all this pics was made by me .
may be this pic will help?

real difference with original brembo gt only in bridge in the middle.
but caliper design without bridge more practical - easier to change pads, you don't need to take off caliper.

This is what I meant by different casting. These two calipers are indeed different. I don't think is the same machined caliper :-)

[Eagle1oh7]

None of you guys have gotten the ECS kit? 18s needed according to the description and comes with all parts necessary to install with no extra machining.