ECS bavauto rear bushing tool kit options. Is there one that does them all?

mattoak · 01-15-2021, 02:40 PM

I'm about to replace my rear subframe, differential, trailing arm, and control arm bushings on my 2006 E90 325 with 180k miles.

I don't mind buying a tool set to make this job easier, but I see that ECS tuning has 5 options, listed below. Will any one of these accomplish all the bushings I'm trying to replace, or do I need to suck it up and make / buy a second? I assume the Schwaben should be purchased for the subframe and diff bushings, but then that leaves the RTAB and LCAB. Also considering the UCAB if one of the tools for the other two also does those?

Anyone have any knowledge of these?

Schwaben Subframe & Differential Bushing Tool Set
https://www.ecstuning.com/b-schwaben.../024979sch01a/
Says it does subframe and diff bushings, but what about the trailing and control arms?

Trailing Arm Bushing Tool Set
https://www.ecstuning.com/b-bav-auto.../b8800101~bat/
I assume it does the trailing arm bushings...?

Trailing Arm Inner Bushing Tool - Master Set
https://www.ecstuning.com/b-bav-auto.../b8800137~bav/
Why does this say Inner...does it ONLY do the inner TABs? That seems silly if it doesn't do them both, but that's what the tool below is for right?

Trailing Arm Bushing Tool - Bavarian Autosport
https://www.ecstuning.com/b-bav-auto.../b8800047~bav/
I assume this does the trailing arm bushings, but how is it different than the other kit that is more than twice the price?

Heavy Duty Control Arm Bushing Remover / Installer
https://www.ecstuning.com/b-bav-auto.../b8800078~bav/
I assume this is only for lower control arms...

TriumphTim · 01-16-2021, 07:32 AM

I bought and used this set below recently to replace everything except the diff bushing and subframe bushings on my 2008 328ix. It did all the various suspension bushings inner and outer.

I don't have experience with replacing the diff or subframe bushings but I *think* this set could be rigged up to do them with a trip to the hardware store/easy fab work for less than another expensive set.

Hope this helps...

Tool - Trailing Arm Inner Bushing Tool - Master Set - Bavarian Autosport
Makes installing trailing arm bushing installation much easier.
Mfg Part #
B8800137

PourBoi-Jay · 01-17-2021, 08:08 PM

^^This one will work best for the RTAB and Inner Lower CA Bushing.

I bought this eBay tool for the subframe bushing.

https://www.ebay.com/itm/BMW-E82-E90....m46890.l49292

mattoak · 01-25-2021, 07:02 PM

I ended up buying the Schwaben tool from ECS, and this bushing tool from eBay:
https://www.ebay.com/itm/Differentia...53.m1438.l2649

Which was actually this item: FreeTec Silent Bearing Puller Kit Dent Puller Set Compatible for BMW
Drop shipped directly from Amazon. At least I paid less on ebay than what its listed on amazon for!

The ebay tool set just arrived today. Waiting on parts from FCP/ECS, but I will report back (maybe in a new thread) how they work out. For $65, I figured I'd take a gamble and hope it makes my life $65 worth less frustrating.

chazzz · 02-05-2021, 02:13 PM

Quote:

Originally Posted by mattoak

I ended up buying the Schwaben tool from ECS, and this bushing tool from eBay:
https://www.ebay.com/itm/Differentia...53.m1438.l2649

Which was actually this item: FreeTec Silent Bearing Puller Kit Dent Puller Set Compatible for BMW
Drop shipped directly from Amazon. At least I paid less on ebay than what its listed on amazon for!

The ebay tool set just arrived today. Waiting on parts from FCP/ECS, but I will report back (maybe in a new thread) how they work out. For $65, I figured I'd take a gamble and hope it makes my life $65 worth less frustrating.

Did the $65 tool work for you? Would love to hear this from you. I am going to work on my son's E90 rear bushings. I didn't want to spend $200 for Bavarian Trailing Arm Bushing tool- for a ONE TIME use. I don't mind $65... so please let me know. Thanks.

335xi_full_throttle · 02-05-2021, 05:07 PM

Quote:

Originally Posted by chazzz

Quote:

Originally Posted by mattoak

I ended up buying the Schwaben tool from ECS, and this bushing tool from eBay:
https://www.ebay.com/itm/Differentia...53.m1438.l2649

Which was actually this item: FreeTec Silent Bearing Puller Kit Dent Puller Set Compatible for BMW
Drop shipped directly from Amazon. At least I paid less on ebay than what its listed on amazon for!

The ebay tool set just arrived today. Waiting on parts from FCP/ECS, but I will report back (maybe in a new thread) how they work out. For $65, I figured I'd take a gamble and hope it makes my life $65 worth less frustrating.

Did the $65 tool work for you? Would love to hear this from you. I am going to work on my son's E90 rear bushings. I didn't want to spend $200 for Bavarian Trailing Arm Bushing tool- for a ONE TIME use. I don't mind $65... so please let me know. Thanks.

I found that the tool used in this thread worked perfectly for the subframe bushings.

best? and cheapest? M3 subframe bushing DIY tool https://www.e90post.com/forums/showthread.php?t=976683

mweisdorfer · 02-13-2021, 08:55 AM

You can make your own tools with black pipe, grade 8 bolts, nuts & washers

You just need to know the diameters of pipe you need. Once you take the subframe out of the car, you can measure out what you need.

01-15-2021, 02:40 PM	#1
mattoak Private First Class 9 Rep 114 Posts Drives: 06 325i Join Date: Oct 2013 Location: Fort Collins, CO iTrader: (0)	ECS bavauto rear bushing tool kit options. Is there one that does them all? I'm about to replace my rear subframe, differential, trailing arm, and control arm bushings on my 2006 E90 325 with 180k miles. I don't mind buying a tool set to make this job easier, but I see that ECS tuning has 5 options, listed below. Will any one of these accomplish all the bushings I'm trying to replace, or do I need to suck it up and make / buy a second? I assume the Schwaben should be purchased for the subframe and diff bushings, but then that leaves the RTAB and LCAB. Also considering the UCAB if one of the tools for the other two also does those? Anyone have any knowledge of these? Schwaben Subframe & Differential Bushing Tool Set https://www.ecstuning.com/b-schwaben.../024979sch01a/ Says it does subframe and diff bushings, but what about the trailing and control arms? Trailing Arm Bushing Tool Set https://www.ecstuning.com/b-bav-auto.../b8800101~bat/ I assume it does the trailing arm bushings...? Trailing Arm Inner Bushing Tool - Master Set https://www.ecstuning.com/b-bav-auto.../b8800137~bav/ Why does this say Inner...does it ONLY do the inner TABs? That seems silly if it doesn't do them both, but that's what the tool below is for right? Trailing Arm Bushing Tool - Bavarian Autosport https://www.ecstuning.com/b-bav-auto.../b8800047~bav/ I assume this does the trailing arm bushings, but how is it different than the other kit that is more than twice the price? Heavy Duty Control Arm Bushing Remover / Installer https://www.ecstuning.com/b-bav-auto.../b8800078~bav/ I assume this is only for lower control arms... Last edited by mattoak; 01-15-2021 at 03:35 PM..
	Appreciate 0 Tweet Quote

01-16-2021, 07:32 AM	#2
TriumphTim Private 74 Rep 62 Posts Drives: 2008 328xi Join Date: Dec 2020 Location: Perkasie PA iTrader: (0)	I bought and used this set below recently to replace everything except the diff bushing and subframe bushings on my 2008 328ix. It did all the various suspension bushings inner and outer. I don't have experience with replacing the diff or subframe bushings but I think this set could be rigged up to do them with a trip to the hardware store/easy fab work for less than another expensive set. Hope this helps... Tool - Trailing Arm Inner Bushing Tool - Master Set - Bavarian Autosport Makes installing trailing arm bushing installation much easier. Mfg Part # B8800137
	Appreciate 0 Quote

01-17-2021, 08:08 PM	#3
PourBoi-Jay Captain 326 Rep 613 Posts Drives: 2009 335i M-Sport Join Date: Jun 2014 Location: Central CT iTrader: (3)	^^This one will work best for the RTAB and Inner Lower CA Bushing. I bought this eBay tool for the subframe bushing. https://www.ebay.com/itm/BMW-E82-E90....m46890.l49292
	Appreciate 0 Quote

01-25-2021, 07:02 PM	#4
mattoak Private First Class 9 Rep 114 Posts Drives: 06 325i Join Date: Oct 2013 Location: Fort Collins, CO iTrader: (0)	I ended up buying the Schwaben tool from ECS, and this bushing tool from eBay: https://www.ebay.com/itm/Differentia...53.m1438.l2649 Which was actually this item: FreeTec Silent Bearing Puller Kit Dent Puller Set Compatible for BMW Drop shipped directly from Amazon. At least I paid less on ebay than what its listed on amazon for! The ebay tool set just arrived today. Waiting on parts from FCP/ECS, but I will report back (maybe in a new thread) how they work out. For $65, I figured I'd take a gamble and hope it makes my life $65 worth less frustrating.
	Appreciate 0 Quote

02-13-2021, 08:55 AM	#7
mweisdorfer Major General 1903 Rep 6,968 Posts Drives: 2007 Black/Black 335i e90 Join Date: Apr 2011 Location: Holly, MI iTrader: (0) Garage List 2007 BMW E90 335i [0.00] 2008 bmw x5 [0.00]	You can make your own tools with black pipe, grade 8 bolts, nuts & washers You just need to know the diameters of pipe you need. Once you take the subframe out of the car, you can measure out what you need.
	Appreciate 0 Quote