335is spacers

SC335is · 01-07-2019, 07:24 AM

I am looking to get some spacers for my rims, I have a 13' 335is with 19".

What are the recommendations for size both front and rear? I've tried reading the past threads but can specifically find something that works.

Anyone have suggestions?

TIA

Phil325i · 01-07-2019, 11:47 AM

If you measure, you can't go wrong:

SC335is · 01-07-2019, 12:15 PM

Here is what I measured. Images are rear then front. 12mm in the rear and 10mm in the front is what it measures to inside. I'd like to be flush on outside. You'll notice the placement of the tape is on the innermost part of the tire too...

714-Bimmer · 02-20-2019, 11:15 PM

I have a 2011 335is convertible, also white with 19x8.5 fronts I think, and 19x9 in the rear. Same wheels. I used a 12.5mm rear and flushed it out along with a 5mm front. I wanted that staggered look, wide in the rear and a bit narrower up front. Perfect look for me.

Now just looking for a coil over or a bit taller rear sprints so I can up my tires to another half inch or so taller.

Mark

mawzi · 02-24-2019, 03:04 AM

10mm all around worked for me. 2012 is, NOT convertible, 313 19" oem wheels.

SC335is · 02-24-2019, 01:37 PM

Anyone mind confirming the specs on the spacers?

BSM n54iS · 02-25-2019, 06:51 PM

19" 313m:

15mm R
12.5mm F

I have my rear seats removed though, coupe, might wanna consider 12.5mm R.

335e92tx · 05-12-2019, 09:34 AM

I guess oem bolts work fine on 15mm?

SC335is · 05-12-2019, 12:26 PM

Quote:

Originally Posted by 335e92tx

I guess oem bolts work fine on 15mm?

Mine came with new bolts

mawzi · 05-12-2019, 02:05 PM

Quote:

Originally Posted by 335e92tx

I guess oem bolts work fine on 15mm?

No, you need longer bolts.

BSM n54iS · 05-13-2019, 03:47 PM

Quote:

Originally Posted by 335e92tx

I guess oem bolts work fine on 15mm?

very much no

SC335is · 05-13-2019, 08:16 PM

Quote:

Originally Posted by SC335is

Quote:

Originally Posted by 335e92tx

I guess oem bolts work fine on 15mm?

Mine came with new bolts

Here are the ones I got.

BMWRich · 05-22-2019, 03:27 PM

Quote:

Originally Posted by SC335is

Here are the ones I got.

SC335is what size spacers did you end up going with? Where did you buy from?

SC335is · 05-22-2019, 07:29 PM

Quote:

Originally Posted by BMWRich

Quote:

Originally Posted by SC335is

Here are the ones I got.

SC335is what size spacers did you end up going with? Where did you buy from?

Blox- EBay
I would buy again, great quality.

https://rover.ebay.com/rover/0/0/0?m...2F282941744394

10mm + 12mm

Lex335is · 06-19-2019, 01:36 AM

Looks great with red leather and white exterior on a cabrio. Good job on keeping it look so clean and fresh. I have exact same one with 19" rims and front/back carbon fiber lips. Where did you get the side skirts tho? Looks even sicker with them!

SC335is · 06-19-2019, 08:53 PM

Quote:

Originally Posted by Lex335is

Looks great with red leather and white exterior on a cabrio. Good job on keeping it look so clean and fresh. I have exact same one with 19" rims and front/back carbon fiber lips. Where did you get the side skirts tho? Looks even sicker with them!

Thanks man. Here is the link

https://rover.ebay.com/rover/0/0/0?m...2F272563906586

Lex335is · 06-19-2019, 10:11 PM

Great thanks bro! My front lip starting to come off slowly.. know any way to attach it back tightly? Also how are the spacers, no rubbing? Have any pics to show how your bimmer looks with the spacers?

SC335is · 06-20-2019, 06:24 AM

Quote:

Originally Posted by Lex335is

Great thanks bro! My front lip starting to come off slowly.. know any way to attach it back tightly? Also how are the spacers, no rubbing? Have any pics to show how your bimmer looks with the spacers?

I used self tapping screws with neoprene washers to attach my lip. Screwed in from the bottom, def not coming off.

Lex335is · 06-24-2019, 09:55 PM

Yeah mine is also screwed from the bottom. For some reason it started peeling off from the top of the bumper.. Well done with the spacers, looks sharp man!

Mizh · 09-30-2019, 09:11 AM

Quote:

Originally Posted by SC335is

I used self tapping screws with neoprene washers to attach my lip. Screwed in from the bottom, def not coming off.

Is that a CF lip? Where did you buy that?

SC335is · 09-30-2019, 07:46 PM

Quote:

Originally Posted by Mizh

Quote:

Originally Posted by SC335is

I used self tapping screws with neoprene washers to attach my lip. Screwed in from the bottom, def not coming off.

Is that a CF lip? Where did you buy that?

Mashimarho

PS2N54 · 10-09-2019, 05:08 PM

i have 5mm on front and 17mm on back with 17" m-sport wheels. my tires are staggered. it looks excellent and still retains an OEM look without it looking like you're using spacers, but also doesnt look like wheels are sunken in either.

01-07-2019, 07:24 AM	#1
SC335is Private 86 Rep 87 Posts Drives: 13’ 335is Convertible Join Date: Sep 2018 Location: SC iTrader: (0)	335is spacers I am looking to get some spacers for my rims, I have a 13' 335is with 19". What are the recommendations for size both front and rear? I've tried reading the past threads but can specifically find something that works. Anyone have suggestions? TIA Attached Images
	Appreciate 0 Tweet Quote

01-07-2019, 11:47 AM	#2
Phil325i Brigadier General 557 Rep 3,104 Posts Drives: E92 325i MSport Coupe Join Date: Apr 2012 Location: UK South East iTrader: (1) Garage List 2009 BMW 325i Coupe [6.00]	If you measure, you can't go wrong: __________________ E92 pre-LCI 325i - Ohlins R&T; H&R spacers; M3 strut brace; Swift thrust sheets; 3 x chassis braces; diff brace; N53 V-brace; 034 subframe inserts; BMS clutch stop; BMS CDV; RE g/box mounts; Delrin shift bushes; Saikoumichi OCC; Cyba scoops; BMW Perf Exhaust; HEL s/steel brake hoses; M3 rear spoiler; Recaro Sportster CSs; M3 white dash LEDs; LED Angels; LED side repeaters; BMW Perf black grille; CSL reps; SSDD carbon diffuser; Monster Wrap black roof/clear front
	Appreciate 3 SC335is86.00 Fritzer924.00 Lochstar86.00 Quote

01-07-2019, 12:15 PM	#3
SC335is Private 86 Rep 87 Posts Drives: 13’ 335is Convertible Join Date: Sep 2018 Location: SC iTrader: (0)	Here is what I measured. Images are rear then front. 12mm in the rear and 10mm in the front is what it measures to inside. I'd like to be flush on outside. You'll notice the placement of the tape is on the innermost part of the tire too... Attached Images
	Appreciate 0 Quote

02-20-2019, 11:15 PM	#4
714-Bimmer Private First Class 29 Rep 176 Posts Drives: 2013 335is Convertible Join Date: May 2018 Location: Orange, County, Ca iTrader: (0)	Spacers I have a 2011 335is convertible, also white with 19x8.5 fronts I think, and 19x9 in the rear. Same wheels. I used a 12.5mm rear and flushed it out along with a 5mm front. I wanted that staggered look, wide in the rear and a bit narrower up front. Perfect look for me. Now just looking for a coil over or a bit taller rear sprints so I can up my tires to another half inch or so taller. Mark
	Appreciate 1 SC335is86.00 Quote

02-24-2019, 03:04 AM	#5
mawzi Private First Class 19 Rep 183 Posts Drives: 2012 335is MT Join Date: Mar 2018 Location: Toronto iTrader: (0)	10mm all around worked for me. 2012 is, NOT convertible, 313 19" oem wheels.
	Appreciate 1 SC335is86.00 Quote

02-24-2019, 01:37 PM	#6
SC335is Private 86 Rep 87 Posts Drives: 13’ 335is Convertible Join Date: Sep 2018 Location: SC iTrader: (0)	Anyone mind confirming the specs on the spacers?
	Appreciate 0 Quote

02-25-2019, 06:51 PM	#7
BSM n54iS Brigadier General 2603 Rep 4,200 Posts Drives: In front of flashing lights Join Date: Aug 2015 Location: Pulled over on the side of the road iTrader: (7)	19" 313m: 15mm R 12.5mm F I have my rear seats removed though, coupe, might wanna consider 12.5mm R. __________________ '11 335is BSM MT "BMW Performance Editon" GruppeM CF Intake \| AR Resonated DP \| ER CP \| Turbosmart RacePort BOV \| Cobb FMIC \| RB Inlets \| RB External Mishi/Turner OCC \| Michelin PS4 \| BMW Performance Springs/Bilstein B8 + Dinan & M3 bits \| BMW Brembo BBK \| BMW Performance CF Spoiler \| BMW Performance CF Lip \| BMW Performance Alcantara \| PS Designs GTS Armrest \| AG H6-40 \| Rear Seat Delete
	Appreciate 2 SC335is86.00 whyzee1251229.50 Quote

05-12-2019, 09:34 AM	#8
335e92tx ahat 956 Rep 2,800 Posts Drives: Was '07-335e92 - Now '13-335IS Join Date: Mar 2008 Location: Texas iTrader: (6)	I guess oem bolts work fine on 15mm? __________________ Apr'17 - '13 335IS replaced the '07 E92 IS mods-BavSound Stage2 Audio & Subs/MFactory LSD/MHD-BQ custom Tune/ATM-IC/AFE Momentum GT/Konis/Mfront&HeimJoint Rear rods&arms/Brembos.
	Appreciate 0 Quote

06-19-2019, 01:36 AM	#15
Lex335is Registered 2 Rep 3 Posts Drives: 335is Cabrio Join Date: Jun 2019 Location: FL iTrader: (0)	Looks great with red leather and white exterior on a cabrio. Good job on keeping it look so clean and fresh. I have exact same one with 19" rims and front/back carbon fiber lips. Where did you get the side skirts tho? Looks even sicker with them!
	Appreciate 0 Quote

06-19-2019, 10:11 PM	#17
Lex335is Registered 2 Rep 3 Posts Drives: 335is Cabrio Join Date: Jun 2019 Location: FL iTrader: (0)	Great thanks bro! My front lip starting to come off slowly.. know any way to attach it back tightly? Also how are the spacers, no rubbing? Have any pics to show how your bimmer looks with the spacers?
	Appreciate 0 Quote

06-24-2019, 09:55 PM	#19
Lex335is Registered 2 Rep 3 Posts Drives: 335is Cabrio Join Date: Jun 2019 Location: FL iTrader: (0)	Yeah mine is also screwed from the bottom. For some reason it started peeling off from the top of the bumper.. Well done with the spacers, looks sharp man!
	Appreciate 1 SC335is86.00 Quote

10-09-2019, 05:08 PM	#22
PS2N54 Private First Class 75 Rep 187 Posts Drives: 335i Join Date: Aug 2019 Location: ON iTrader: (4)	i have 5mm on front and 17mm on back with 17" m-sport wheels. my tires are staggered. it looks excellent and still retains an OEM look without it looking like you're using spacers, but also doesnt look like wheels are sunken in either.
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search