[darknezz19]

Tried to flash a donor MSV70 with winkfp because original was dead with short to ground on one of the 12v rails. I think I flashed the wrong zb because customer got his cas dme and key back but car wont turn on the dash now. He got a K Dcan cable so we could try to flash with another zb locally, but winkfp errors out with same error every time. He had battery fully charged to 13.5v and had another car running hooked up with cables. Below is the error output and the UIF output. This is when we try to flash bimmbergeeks RSADelete batch file. Also tried the stock tune batch file. We also tried another ZB in comfort mode.


-=-=-Batch WinKFP output-=-=-


INFO000=Error: Error 211: Error on flash programming!
INFO001=Error: Error 9000: PABD 08MSV70 Programmieren 6 Debug 08MSV70, DIAGNOSE_MODE (ECUPM): ERROR_ECU_SECURITY_ACCESS_DENIED__SECURITY_ACCESS_ REQUESTED
INFO002=Error: Error 2082: PABD 08MSV70 Programmieren 2190 Clear flash failed 08MSV70, FLASH_LOESCHEN (...): ERROR_ECU_SECURITY_ACCESS_DENIED__SECURITY_ACCESS_ REQUESTED
INFO003=Error: Error 2082: PABD 08MSV70 Programmieren 2202 Clear flash failed 08MSV70, FLASH_LOESCHEN (...)
INFO004=Error: Error 2082: Error COAPI2.CPP coapiRunCabd 6 Clear flash failed SG_PROGRAMMIEREN
INFO005=Error: Error 2082: Error COAPIKF.CPP coapiKfProgSgDevelop 4 Clear flash failed
ERG=Programming not ok. Fatal Error


-=-=-UIF Info-=-=-


Vehicle identification number: WBAVB33506KR72149
Date: 08.05.2022
Change index:
Software number: 7581299
Office number: 7532087
Assembly identification number: 7581300
Seral number: NFS01
Program number: 0049PP0L921S
Kilometer: 0
Dealer number: 000240


Anything I can try before he just ships it back? Actually have a kombi now for my bench setup, should have had it before. Any help is appreciated.

[dpaul]

Originally Posted by darknezz19

Tried to flash a donor MSV70 with winkfp because original was dead with short to ground on one of the 12v rails. I think I flashed the wrong zb because customer got his cas dme and key back but car wont turn on the dash now. He got a K Dcan cable so we could try to flash with another zb locally, but winkfp errors out with same error every time. He had battery fully charged to 13.5v and had another car running hooked up with cables. Below is the error output and the UIF output. This is when we try to flash bimmbergeeks RSADelete batch file. Also tried the stock tune batch file. We also tried another ZB in comfort mode.


-=-=-Batch WinKFP output-=-=-


INFO000=Error: Error 211: Error on flash programming!
INFO001=Error: Error 9000: PABD 08MSV70 Programmieren 6 Debug 08MSV70, DIAGNOSE_MODE (ECUPM): ERROR_ECU_SECURITY_ACCESS_DENIED__SECURITY_ACCESS_ REQUESTED
INFO002=Error: Error 2082: PABD 08MSV70 Programmieren 2190 Clear flash failed 08MSV70, FLASH_LOESCHEN (...): ERROR_ECU_SECURITY_ACCESS_DENIED__SECURITY_ACCESS_ REQUESTED
INFO003=Error: Error 2082: PABD 08MSV70 Programmieren 2202 Clear flash failed 08MSV70, FLASH_LOESCHEN (...)
INFO004=Error: Error 2082: Error COAPI2.CPP coapiRunCabd 6 Clear flash failed SG_PROGRAMMIEREN
INFO005=Error: Error 2082: Error COAPIKF.CPP coapiKfProgSgDevelop 4 Clear flash failed
ERG=Programming not ok. Fatal Error


-=-=-UIF Info-=-=-


Vehicle identification number: WBAVB33506KR72149
Date: 08.05.2022
Change index:
Software number: 7581299
Office number: 7532087
Assembly identification number: 7581300
Seral number: NFS01
Program number: 0049PP0L921S
Kilometer: 0
Dealer number: 000240


Anything I can try before he just ships it back? Actually have a kombi now for my bench setup, should have had it before. Any help is appreciated.

Very difficult to follow your description of what steps you've performed. Perhaps you could list what was done from the beginning, in order and in detail.

No idea what "...but car wont turn on the dash now" means.
I don't understand "...actually have a kombi now for my bench setup, should have had it before." AFAIK kombi is not relevant to DME programming by WinKFP.