[CrazyCarMods]

Hey guys,
I few months ago I was a little skeptical about the ARM Motorsports 7 inch intercooler. But......
When I was ordering their down pipes (to be installed), I decided to ask them what was the deal with this whole bottle neck thing
on the cold side of the intercooler that I kept hearing about?
They stated that they had no idea and that there was no bottle neck.
I asked them and asked them again.
To make long story short. I decided to take a gamble and order the intercooler, along other products I was ordering that day.
Now that I have opened the box and installed the intercooler, I am happy with the choice I made.
I decided that it was good to put this information out there, for anyone who it thinking about buying their products and I ended up documenting it.
So far the fitment of the charge pipe, upgraded intercooler hoses and the 7 inch intercooler where on point. No issues at all.
Feel free to take a look.
And let me know what you think and what your experience has been.
Also feel free to subscribe, Would definitely appreciate the support





[u2b]

[/u2b]

[Boosted12a]

Do you have any logs of iat? That will be asked. It looks pretty good

[datTeeCK]

Originally Posted by Boosted12a

Do you have any logs of iat? That will be asked. It looks pretty good

+1 Good fitment is great, but how does it perform? 😉

[CrazyCarMods]

Originally Posted by Boosted12a

Do you have any logs of iat? That will be asked. It looks pretty good

Originally Posted by datTeeCK

+1 Good fitment is great, but how does it perform? 😉

I have been monitoring the temps with Protool, but no logs yet.
I have to take care of a few more maintenance before tuning.
I'm planning to run MHD. With MHD I will definitely be able to get some logs.
So far temps don't change much after a few runs. But then again I'm still not tuned yet.
What would be the ideal way to test those temps?

[Boosted12a]

Differential between ambient and intake temp. Say if it's 90° outside and your ic is working awesome it should show 98° under full boost, only an 8° rise in temp. That's just an example.

[Jeef]

it's nice the product fits but the quality is visually noticeable...

Wish psp was still around or people went with other options.

[Bimmer_Bro]

How quick the intercooler recovers after a few pulls is important also.
I went with a different brand, however, if I was buying a IC again I would avoid any that use the factory connections like that. They seems to leak no matter what.
OP I hope you installed new Green (hot side) and black (cold side) rubber seals when you installed

[Jeef]

Originally Posted by Bimmer_Bro

How quick the intercooler recovers after a few pulls is important also.
I went with a different brand, however, if I was buying a IC again I would avoid any that use the factory connections like that. They seems to leak no matter what.
OP I hope you installed new Green (hot side) and black (cold side) rubber seals when you installed

have you tried CSF?