[Cali*335i]

Okay not to sure if anyone has had this problem but long story short I was messing with the jb4 menu and was on menu 6,1 maxcool on and for some reason when I exited the menu and went back I'm my
Speedometer and tachometer #s were off I was around 7k rpm for map 5
Ill post up pics later but this is annoying. I connected to the computer to reset to default settings and its giving me the same problem. Please help

[tjnitsche]

You accidentally changed the gauge configuration. You need to count up to speedo position 5 and then set it for what car you have then exit and it will be done again. Check the thread jb4 getting started on the other forum for what you should configure it to.

[iturbo_bmw]

i did something similar. it turned out that i was looking at the wrong menu. If you have the G5 ISO, the menu is actually different from the non iso jb4's. Make sure ur looking at the right menu for your jb4 and there are setting where you can reset the cluster to your vehicle.

[Cali*335i]

Thanks guys I actually went back and took a look at the "getting started with jb4" I found how I reset everything thanks again