Konig/Kenda 18x9.5 Square Setup

Aurora · 05-30-2020, 09:56 AM

Just wanted to share a combo that I recently installed. I only saw that 09STBMW had done some time ago.

Wheel Specs: Konig Ampliform 18x9.5 +35
Tire Specs: Kenda KR20A (300tw) 265/35R18
Suspension: Bilstein B14 PSS9 Coilover Kit w/ Camber Plates
Spacers: 5mm Front / 12mm Rear
Other: Clearanced Front Shock Perch

It appears I don't have the ability to post images?

Here are direct links:

https://photos.app.goo.gl/DN6MivVPig2pjj7QA

https://photos.app.goo.gl/cRNMzgZuL7oNDX5p8

https://photos.app.goo.gl/f5nYC1jzZWh67QoN8

colorado.e9x · 05-30-2020, 10:21 AM

This is exactly what I came to this sub for
Just picked up an 18x9.5 et40 square setup.

Currently on 17x7et et30 square with a 10mm front spacer and a 20mm rear spacer

Should I get new spacers?

Aurora · 05-30-2020, 10:41 AM

Quote:

Originally Posted by colorado.e9x

This is exactly what I came to this sub for
Just picked up an 18x9.5 et40 square setup.

Currently on 17x7et et30 square with a 10mm front spacer and a 20mm rear spacer

Should I get new spacers?

You'd roughly need 10mm Front and 17mm Rear. With the 20's in the rear I think you'll be pushing out a bit too far.

colorado.e9x · 05-30-2020, 11:18 AM

Quote:

Originally Posted by Aurora

You'd roughly need 10mm Front and 17mm Rear. With the 20's in the rear I think you'll be pushing out a bit too far.

Did a small test fit in the front, with the 10mm spacer the lip of the rim protrudes out about 1/2". It was hard to see with your pics but is that how yours looks?
And good to know, I'll keep that in mind.

Edit: Are the fronts 265s too? Seems like it'd rub

pennychow · 06-02-2020, 01:45 AM

konig ampliform looks so nice.
I wanted to buy one with bronze colour in Apr but no stock.
finally I change to VMR instead.

colorado.e9x · 06-02-2020, 01:04 PM

Quote:

Originally Posted by colorado.e9x

Edit: Are the fronts 265s too? Seems like it'd rub

He said "square" so yeah, probably.

05-30-2020, 09:56 AM	#1
Aurora New Member 2 Rep 14 Posts Drives: 07' 335i MT Sedan Join Date: May 2017 Location: Broken Arrow, OK iTrader: (0)	Konig/Kenda 18x9.5 Square Setup Just wanted to share a combo that I recently installed. I only saw that 09STBMW had done some time ago. Wheel Specs: Konig Ampliform 18x9.5 +35 Tire Specs: Kenda KR20A (300tw) 265/35R18 Suspension: Bilstein B14 PSS9 Coilover Kit w/ Camber Plates Spacers: 5mm Front / 12mm Rear Other: Clearanced Front Shock Perch It appears I don't have the ability to post images? Here are direct links: https://photos.app.goo.gl/DN6MivVPig2pjj7QA https://photos.app.goo.gl/cRNMzgZuL7oNDX5p8 https://photos.app.goo.gl/f5nYC1jzZWh67QoN8 Last edited by Aurora; 05-30-2020 at 10:29 AM..
	Appreciate 1 Tweet Quote

05-30-2020, 10:21 AM	#2
colorado.e9x eBay Special 3066 Rep 3,028 Posts Drives: E90 330xi Join Date: Feb 2018 Location: Western Slope, Colorado iTrader: (1) Garage List 2007 BMW 328xi [9.50] 2006 BMW 330xi [10.00]	This is exactly what I came to this sub for Just picked up an 18x9.5 et40 square setup. Currently on 17x7et et30 square with a 10mm front spacer and a 20mm rear spacer Should I get new spacers? __________________ Common sense is a flower that does not bloom in everyone's garden
	Appreciate 0 Quote

06-02-2020, 01:45 AM	#5
pennychow Enlisted Member 2 Rep 47 Posts Drives: bmw e90 Join Date: Apr 2020 Location: hong kong iTrader: (0)	konig ampliform looks so nice. I wanted to buy one with bronze colour in Apr but no stock. finally I change to VMR instead.
	Appreciate 0 Quote