E90 325 Muffler Delete !!!!

D-Rock · 09-26-2007, 10:04 PM

I have an intake on mine like scheerspeed was saying. I should make a vid.

Excellence · 09-26-2007, 10:36 PM

Quote:

Originally Posted by D-Rock

I have an intake on mine like scheerspeed was saying. I should make a vid.

Do it!

GreddyBoy858 · 09-26-2007, 10:42 PM

HA.. So check this out.. I decided today that I was going to get this done FINALLY!! I go to the local muffler shop and ask how much it would cost to get the muffler removed and a nice dual outlet tip. He goes.. "Welp, see BMW's are hard to do... Gonna cost you like em.. $250.00" HAHAHAHAHA.. I looked at him and said are you fucking kidding?? He said nope, so I said that I will have to think about it...

On the way home, I was thinking about it.. I wonder if he is just saying that cause he thinks I have money.. I'm going to go back in my truck and see what he quotes me...

I have a lifted '97 Tacoma, so I go back and talk to THE SAME GUY!!! He comes out and looks at my truck, and goes.. "That sure is a nice truck, must be fun off roadin in that".. I say yea, and he goes I'll cut out the muffler and throw in a tip for like.. $100.00...

What an asshole!! Needless to say, I am going to go somewhere else, just wanted to share/vent....

Excellence · 09-26-2007, 11:02 PM

Quote:

Originally Posted by GreddyBoy858

HA.. So check this out.. I decided today that I was going to get this done FINALLY!! I go to the local muffler shop and ask how much it would cost to get the muffler removed and a nice dual outlet tip. He goes.. "Welp, see BMW's are hard to do... Gonna cost you like em.. $250.00" HAHAHAHAHA.. I looked at him and said are you fucking kidding?? He said nope, so I said that I will have to think about it...

On the way home, I was thinking about it.. I wonder if he is just saying that cause he thinks I have money.. I'm going to go back in my truck and see what he quotes me...

I have a lifted '97 Tacoma, so I go back and talk to THE SAME GUY!!! He comes out and looks at my truck, and goes.. "That sure is a nice truck, must be fun off roadin in that".. I say yea, and he goes I'll cut out the muffler and throw in a tip for like.. $100.00...

What an asshole!! Needless to say, I am going to go somewhere else, just wanted to share/vent....

Go to a chinese/indian dealership. You can probably get it done for under 80$ tax-in. Plus the workmanship is pretty much on par with everyone else in town. Welding is welding. I would do it myself if I had a jack to lift my car up.

ahnh77 · 09-26-2007, 11:21 PM

i paid a muffler shop $50 an hour....it took him about 45 minutes to cut pipes...bend...weld...a complete catback exahaust..solo....i gave him an extra $10 for doing it so fast while i watched....

latter on i came back to switch mufflers...cut out the muffler and try a different mufflers....he charged me $20 each time....i tried about 4 different mufflers to get the exact sound i wanted....he charged me $10 for each cut and weld of tips...i tried out 3 tips...to test for sound...until i found the exact set up i wanted...

it's not that hard to cut and weld....regardless of the car...and the exhaust lasted 5+ years without breaks until the car was totalled...(3 inch drop with intrax springs...hit a dip too hard and fast...cracked the motor)

Quote:

Originally Posted by Excellence

Go to a chinese/indian dealership. You can probably get it done for under 80$ tax-in. Plus the workmanship is pretty much on par with everyone else in town. Welding is welding. I would do it myself if I had a jack to lift my car up.

Excellence · 09-28-2007, 02:22 PM

I went to midas and they quoted me 300$ for a stinking pipe and a dynomax Y-two tip.
Thats effing retarted. I'm going somewhere else to check.

BMW_E90 · 09-29-2007, 01:13 PM

go to does ghetto looking muffler shops. very cheap yet still good welding!

ScheerSpeed · 09-29-2007, 03:02 PM

Quote:

Originally Posted by BMW_E90

go to does ghetto looking muffler shops. very cheap yet still good welding!

haha tru dat!

Excellence · 09-29-2007, 03:59 PM

Not many ghetto shops in my area have the bending machine for exhaust pipes.
I need to find a nice tip. I saw a DTM tip, makes my car look like a civic

!
Anyone know where I can get a nice looking two pipe tip?

ScheerSpeed · 09-29-2007, 04:23 PM

get magnaflow like mine..looks great and sounds nice, and not too xpensive. $45

Quote:

Originally Posted by Excellence

Not many ghetto shops in my area have the bending machine for exhaust pipes.
I need to find a nice tip. I saw a DTM tip, makes my car look like a civic

!
Anyone know where I can get a nice looking two pipe tip?

Excellence · 09-30-2007, 01:21 AM

Quote:

Originally Posted by ScheerSpeed

get magnaflow like mine..looks great and sounds nice, and not too xpensive. $45

flows are like 90$ in canada...
And most stores that stock em are not supplying flowmasters anymore.

wuufer001 · 09-30-2007, 05:14 PM

go to meineke, they did my resonator delete and cost me $80 inlcuding parts and labor

ScheerSpeed · 09-30-2007, 06:38 PM

Quote:

Originally Posted by Excellence

flows are like 90$ in canada...
And most stores that stock em are not supplying flowmasters anymore.

im just saying magneflow tips...not mufflers

Excellence · 10-01-2007, 10:23 AM

Quote:

Originally Posted by ScheerSpeed

im just saying magneflow tips...not mufflers

Tips are 90$!! The 1 inlet into 2 outlet! Magnas are mad expensive here in toronto...

Quote:

Originally Posted by wuufer001

go to meineke, they did my resonator delete and cost me $80 inlcuding parts and labor

Thats in texas isn't it

.
I dont think meineke exists in canada....

cause a stinking muff delete is so hard to do here! I don't want to pay 300$ when I can just buy a IKON exhuast for my car!

ScheerSpeed · 10-01-2007, 10:22 PM

i think theres an exhaust shop in barrie or orillia that could do it...

Quote:

Originally Posted by Excellence

Tips are 90$!! The 1 inlet into 2 outlet! Magnas are mad expensive here in toronto...

Thats in texas isn't it

.
I dont think meineke exists in canada....

cause a stinking muff delete is so hard to do here! I don't want to pay 300$ when I can just buy a IKON exhuast for my car!

ehhhwik · 10-02-2007, 12:16 AM

Quote:

Originally Posted by Excellence

I went to midas and they quoted me 300$ for a stinking pipe and a dynomax Y-two tip.
Thats effing retarted. I'm going somewhere else to check.

midas is full of crap, they charge by the book, i just brought it to some ugly ass shop owned by some fat Chinese guy and paid him $50 and he did a hell of a job

Excellence · 10-02-2007, 10:05 PM

Quote:

Originally Posted by ehhhwik

midas is full of crap, they charge by the book, i just brought it to some ugly ass shop owned by some fat Chinese guy and paid him $50 and he did a hell of a job

aiyah! I'll keep searching for muff shops...

ScheerSpeed · 10-03-2007, 01:52 PM

how many ppl have done this so far?

1. scheerspeed
2. D-Rock
3.
4.

jjhan85 · 10-03-2007, 04:49 PM

Quote:

Originally Posted by ScheerSpeed

how many ppl have done this so far?

1. scheerspeed
2. D-Rock
3.
4.

me

mtkid · 10-03-2007, 11:58 PM

me but I got a quad setup

Autobot · 10-04-2007, 12:05 AM

Quote:

Originally Posted by michaelkidon

me but I got a quad setup

Do you have pics of your quad setup??

Autobot · 10-04-2007, 12:06 AM

D-Rock, if you could make a sound clip it would be greatly appreciated, I want to hear yours before I go and do this, Thanks man

09-26-2007, 10:04 PM	#155
D-Rock Lieutenant Colonel 188 Rep 1,855 Posts Drives: 325i Join Date: Jul 2005 Location: miami iTrader: (2)	I have an intake on mine like scheerspeed was saying. I should make a vid. __________________
	Appreciate 0 Quote

09-26-2007, 10:42 PM	#157
GreddyBoy858 Mack 28 Rep 209 Posts Drives: 2006 325i Join Date: Aug 2006 Location: San Diego iTrader: (0)	HA.. So check this out.. I decided today that I was going to get this done FINALLY!! I go to the local muffler shop and ask how much it would cost to get the muffler removed and a nice dual outlet tip. He goes.. "Welp, see BMW's are hard to do... Gonna cost you like em.. $250.00" HAHAHAHAHA.. I looked at him and said are you fucking kidding?? He said nope, so I said that I will have to think about it... On the way home, I was thinking about it.. I wonder if he is just saying that cause he thinks I have money.. I'm going to go back in my truck and see what he quotes me... I have a lifted '97 Tacoma, so I go back and talk to THE SAME GUY!!! He comes out and looks at my truck, and goes.. "That sure is a nice truck, must be fun off roadin in that".. I say yea, and he goes I'll cut out the muffler and throw in a tip for like.. $100.00... What an asshole!! Needless to say, I am going to go somewhere else, just wanted to share/vent.... __________________ 2006 BMW 325i / Jet Black / Black Dakota / Step / Nav w/ iDrive/ Premium / Sport / Sat Radio/ Adaptive Xenon Headlights / Debadged / Chrome Exhaust Tips / Rear Foglight Mod. / Rear DC Power Outlet Mod. / 20% Tint
	Appreciate 0 Quote

09-28-2007, 02:22 PM	#160
Excellence G-STAR 200 Rep 1,897 Posts Drives: E90 to A5 Join Date: Dec 2006 Location: Richmond, BC iTrader: (0)	I went to midas and they quoted me 300$ for a stinking pipe and a dynomax Y-two tip. Thats effing retarted. I'm going somewhere else to check.
	Appreciate 0 Quote

09-29-2007, 01:13 PM	#161
BMW_E90 Major 57 Rep 1,035 Posts Drives: 325i Join Date: Jul 2005 Location: California iTrader: (11)	go to does ghetto looking muffler shops. very cheap yet still good welding! __________________
	Appreciate 0 Quote

09-29-2007, 03:59 PM	#163
Excellence G-STAR 200 Rep 1,897 Posts Drives: E90 to A5 Join Date: Dec 2006 Location: Richmond, BC iTrader: (0)	Not many ghetto shops in my area have the bending machine for exhaust pipes. I need to find a nice tip. I saw a DTM tip, makes my car look like a civic ! Anyone know where I can get a nice looking two pipe tip?
	Appreciate 0 Quote

09-30-2007, 05:14 PM	#166
wuufer001 Colonel 375 Rep 2,348 Posts Drives: 2006 E90 M/T Join Date: Mar 2006 Location: DFW, TX//Taiwan//South Africa iTrader: (5) Garage List 2006 325i [9.34]	go to meineke, they did my resonator delete and cost me $80 inlcuding parts and labor __________________
	Appreciate 0 Quote

10-03-2007, 01:52 PM	#172
ScheerSpeed Major General 415 Rep 5,767 Posts Drives: '13 F30 Estoril M-Sport 335i Join Date: Sep 2006 Location: Miami, FL iTrader: (14)	how many ppl have done this so far? 1. scheerspeed 2. D-Rock 3. 4.
	Appreciate 0 Quote

10-03-2007, 11:58 PM	#174
mtkid First Lieutenant 29 Rep 387 Posts Drives: None Join Date: Dec 2006 Location: California iTrader: (0) Garage List 2006 325i [0.00]	me but I got a quad setup __________________ mods to come: koni yellows. camber kit. matte black m6 reps. mtec cf spoiler
	Appreciate 0 Quote

10-04-2007, 12:06 AM	#176
Autobot Brigadier General 84 Rep 3,106 Posts Drives: 15 F22 M235 6MT Join Date: Feb 2007 Location: Charleston, SC iTrader: (8)	D-Rock, if you could make a sound clip it would be greatly appreciated, I want to hear yours before I go and do this, Thanks man __________________ Delivered 28 May
	Appreciate 0 Quote