[xtyper]

Originally Posted by Sick335

Eric, dont make the mistake of comparing my car to Terrys 135... That thing will pull on me even with a slipping tran, im sure... I must lose weight in both my car, my cats, and my belly to hang with him

Yeah, I'm sure Terry's car is a bit faster than yours in current form, but I would still hope to give him a good run at the airstrip. Guess we'll find out for sure in a couple of weeks. It can't come fast enough!!!

[Sick335]

Originally Posted by xtyper

Yeah, I'm sure Terry's car is a bit faster than yours in current form, but I would still hope to give him a good run at the airstrip. Guess we'll find out for sure in a couple of weeks. It can't come fast enough!!!

We've got the plan down... Go there the night before and until we

[Longboarder]

Originally Posted by Sick335

Eric, dont make the mistake of comparing my car to Terrys 135... That thing will pull on me even with a slipping tran, im sure... I must lose weight in both my car, my cats, and my belly to hang with him

Terry mentioned on another board that he needed to drop boost a little given his slipping trans. So who knows...the two of you may be a good run.

[Longboarder]

Originally Posted by xtyper

Yeah, I'm sure Terry's car is a bit faster than yours in current form, but I would still hope to give him a good run at the airstrip. Guess we'll find out for sure in a couple of weeks. It can't come fast enough!!!

Eric, I see you no longer have a 600 hp dyno sig. Was the 600 STD and the 583 in your sig SAE or uncorrected or did you re-dyno???

[xtyper]

Originally Posted by Longboarder

Eric, I see you no longer have a 600 hp dyno sig. Was the 600 STD and the 583 in your sig SAE or uncorrected or did you re-dyno???

That 607whp/710wtq pull was done on the MD Automotive dyno, which as many will attest is a very friendly dyno. I've since dynoed at my regular local shop SpecialtyZ (same shop Terry @ BMS uses) with more average, repeatable results. So, in the interest of not exaggerating power, I've adjusted my sig accordingly.

Don't get me wrong, I'm still VERY happy with the 583whp/678wtq SAE results. Curves still smooth as butter and a very safe AFR. Renntech FTW!

[Sick335]

Originally Posted by xtyper

That 607whp/710wtq pull was done on the MD Automotive dyno, which as many will attest is a very friendly dyno. I've since dynoed at my regular local shop SpecialtyZ (same shop Terry @ BMS uses) with more average, repeatable results. So, in the interest of not exaggerating power, I've adjusted my sig accordingly.

Don't get me wrong, I'm still VERY happy with the 583whp/678wtq results. Curves still smooth as butter and a very safe AFR. Renntech FTW!

What kind of numbers do you expect when your tune adapts to 100 octane?

[xtyper313]

Originally Posted by Sick335

What kind of numbers do you expect when your tune adapts to 100 octane?

Just enough to beat you.

Probably another 15whp/20wtq, bringing me up to a legit 600whp/700wtq.

[Sick335]

Originally Posted by xtyper313

Just enough to beat you.

Probably another 15whp/20wtq, bringing me up to a legit 600whp/700wtq.

[badass335]

Originally Posted by Sick335

now that's a classic

[Wedge1967]

11 days 3 hours and 20 min.... I'm so excited I can hardly wait. Wife thinks I've lost my mind. LOL

[tmo335tt]

Originally Posted by Wedge1967

11 days 3 hours and 20 min.... I'm so excited I can hardly wait. Wife thinks I've lost my mind. LOL

same here

[xtyper313]

Originally Posted by tmo335tt

same here

Me three!

[tmo335tt]

Originally Posted by xtyper313

Me three!

My gf thinks I've lost it. I bought another 335 a couple days ago and am in the middle of putting a big single turbo on it all in time for shift sector.

[Stage 2 Drew]

Originally Posted by xtyper313

Just enough to beat you.

Probably another 15whp/20wtq, bringing me up to a legit 600whp/700wtq.

I wanna piece....I'll probably loose but I'm game.

[Sick335]

I really hope i can figure out all my meth leak problems before the event, just lost a gallon and a half of meth... All in my trunk... Almost passed out from fumes when got in the car, head still hurts

[Sick335]

Originally Posted by Stage 2 Drew

I wanna piece....I'll probably loose but I'm game.

"an SRT4 that beats ur 335 :-)"

I'd like to challenge that

[xtyper]

Originally Posted by Stage 2 Drew

I wanna piece....I'll probably loose but I'm game.

With your high power/weight ratio, I'm sure we will make a great run. What are your quarter mile traps?

[Stage 2 Drew]

Originally Posted by xtyper

With your high power/weight ratio, I'm sure we will make a great run. What are your quarter mile traps?

120 on a lesser tune. I was keeping up with the tuned CLS at the last airstrip attack but I'm pretty sure your Renntech tune make a bit more power.

[Longboarder]

Originally Posted by xtyper

That 607whp/710wtq pull was done on the MD Automotive dyno, which as many will attest is a very friendly dyno. I've since dynoed at my regular local shop SpecialtyZ (same shop Terry @ BMS uses) with more average, repeatable results. So, in the interest of not exaggerating power, I've adjusted my sig accordingly.

Don't get me wrong, I'm still VERY happy with the 583whp/678wtq SAE results. Curves still smooth as butter and a very safe AFR. Renntech FTW!

Holy crap that's a lot of torque

By comparison I'm only making ~ 300 RWTQ at 3,000 RPM which is less than half of what you are making at that point! Peak I made something like 360 RWTQ at redline (8,300).

Anyway I made 555 SAE / 567 uncorrected / 570 STD peak RWHP on a fairly optimistic dyno and I need to stay high in the RPM range to make any power. My car "feels" slow without any torque...it's a weird experience. It will be interesting to run a car like yours with a mountain of torque to see the outcome. I bet that unless I start in the perfect speed/gear, you will just take off like a rocket and I won't have any chance at catching you, even with 400 lbs less.

Does your car hook up on a 40-50 mph roll on start?

[xtyper]

Originally Posted by Longboarder

Holy crap that's a lot of torque

By comparison I'm only making ~ 300 RWTQ at 3,000 RPM which is less than half of what you are making at that point! Peak I made something like 360 RWTQ at redline (8,300).

Anyway I made 555 SAE / 567 uncorrected / 570 STD peak RWHP on a fairly optimistic dyno and I need to stay high in the RPM range to make any power. My car "feels" slow without any torque...it's a weird experience. It will be interesting to run a car like yours with a mountain of torque to see the outcome. I bet that unless I start in the perfect speed/gear, you will just take off like a rocket and I won't have any chance at catching you, even with 400 lbs less.

Does your car hook up on a 40-50 mph roll on start?

Just installed some new Michelin PSS yesterday on the rear to help with that. The stock Pirelli PZeros spun badly from a roll at that speed, but these PSS's seem to hold much better.

[xtyper]

I don't know about you guys, but I can hardly do anything else but check the car forums and threads related to this upcoming event. I can't get any work done! I just sit at my desk dreaming about race day! Am I going to be ok?

My name is Eric, and yes, I'm addicted to Shift-S3ctor Airstrip Attack events.

[skinrock]

Originally Posted by xtyper

I don't know about you guys, but I can hardly do anything else but check the car forums and threads related to this upcoming event. I can't get any work done! I just sit at my desk dreaming about race day! Am I going to be ok?

My name is Eric, and yes, I'm addicted to Shift-S3ctor Airstrip Attack events.

You're not alone. I was just having a discussion with another local member last night, and we were joking about how this is an addiction. Hell, I sent Shiv an email asking if we have time before the event to squeeze any more power out of it.