Sponsored by The Tire Rack

[V335xi]

I've been looking around for rims and tires for a while now and i've finally set my eyes on the VMR V710's in Matte Black. The Avant Garde M310 rims are almost identical but i hear that the 18" M310's don't clear the break calipers for the 335.

Will a 18" VMR V710 rim with 9.5" width be a good match for my car? It is an all wheel drive so i'm probably getting them non staggered 18 by 9.5 all around. My stock rims are 17" so will i feel any loss in performance with the extra weight and size? Offsets 35 all around?

What tires are good for these wheels? 225/35/18? I will need run-flats as I have no spare. What brand tires and where to get them from for a good price?

Much Thanks.

[edirtaynine]

on a 9.5" width, i'd go with around 255/35/18 tire... u can go with 225's, but itll be stretched for sure.

[VMRWheels]

Originally Posted by V335xi

I've been looking around for rims and tires for a while now and i've finally set my eyes on the VMR V710's in Matte Black. The Avant Garde M310 rims are almost identical but i hear that the 18" M310's don't clear the break calipers for the 335.

Will a 18" VMR V710 rim with 9.5" width be a good match for my car? It is an all wheel drive so i'm probably getting them non staggered 18 by 9.5 all around. My stock rims are 17" so will i feel any loss in performance with the extra weight and size? Offsets 35 all around?

What tires are good for these wheels? 225/35/18? I will need run-flats as I have no spare. What brand tires and where to get them from for a good price?

Much Thanks.

If you are looking to go square, we recommend a 18x8.5 +35 all around with 225/40 or 235/40/18 tires.

Our VMR V710's in 18x8.5 +35 clear 335i brakes without a problem! No spacers or aftermarket hardware required.

Since you are a new member I am not able to send you a PM, so you can go ahead and email me directly if you need any additional help on RFT recommendations or packages. charles@velocitymotoring.com

-Charles@VMRWheels

[Sean@PYSpeed.com]

This fitment:

E9X (non M)
- 18"x8.5" ET35mm Front 235/40/18
- 18"x9.5" ET33mm Rear 265/35/18

Should fit fine. Your a new member, I'll leave you a message in your profile! Thanks

[ModBargains.com]

As we discussed over the phone, the VMR V710 will work perfectly on your car. As you already know, the VMR V710 Matte Black 18x8.5 ET35 setup is currently on national back order. You can most definitely get the 18x9.5 ET33 with a 225/35/18 to fit if you're looking to go with a non-staggered setup!

[issabmw]

Why not 255/35/18 9.5" on all four corners? The fronts clear fine.

[platnumdesi01]

VMR V701 3-series offset
18 x 8.5 ET35
18 x 9.5 ET33

Will these fit and run stock tires of a 335i Coupe?

[ModBargains.com]

Originally Posted by platnumdesi01

VMR V701 3-series offset
18 x 8.5 ET35
18 x 9.5 ET33

Will these fit and run stock tires of a 335i Coupe?

Yeah they'll fit the stock 225/40/18 and 255/35/18 from the stock setup!

[Auto Pilot]

Reviving a dead thread, hopefully someone sees this.

I'm in a similar situation, I've got a 2011 e92 335xi.

I've got someone telling me (a relative) that 18 X 9.5 ET45 wheels will fit the rear.

Is this true.

[drfrink24]

Originally Posted by Auto Pilot

Reviving a dead thread, hopefully someone sees this.

I'm in a similar situation, I've got a 2011 e92 335xi.

I've got someone telling me (a relative) that 18 X 9.5 ET45 wheels will fit the rear.

Is this true.

Run the calculator.. 30mm less inside clearance.. I would think that's really pushing it.