[DaveMac]

Hi,
I'm completely new to INPA, and here's the situation. Please bear with me, I'm learning.
My windshield leaked in my 09' E93 and bricked my JB and JBE. I couldn't get a numbers/year/model matching JBE but I got one from an LCI 11' E93.
The programming wasn't an exact match. I got a guy online to do some coding, but he got frustrated and gave up after he turned out the seatbelt light and airbag light.
I'm still missing all comfort access things, and worst of all my back windows and convertible top.
Can someone guide me to program the JBE for the last items? I have INPA and a K+DCAN cable, just need some experience?
Thanks guys!!

[lowrydr310]

Your best bet is to perform a default coding of the module. It's too much to copy and paste here but the instructions are covered fairly well on this site. You'll essentially reprogram the module based on all the options equiped on your original car that are defined in the VO and saved/stored in the CAS (and FRM) module.

[TheNine90]

Just make sure the part numbers are compatible. If you can read the vo from the cas, code both modules using ncsexpert