|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Couple unknown codes
|
|
02-05-2017, 09:27 AM | #1 |
Photographer
412
Rep 2,643
Posts |
Couple unknown codes
Did another scan with Carly as I knew I had a few things to fix and found another code that I can't seem to find anything on, just wondering if anyone can shed some light on them?
Car Communication Computer CCC: - Fault: Message failure - Code: 00E18D - Fault: Ring break diagnosis error - Code: 00E190 I only have the Professional headunit no CCC, my MULF is dead and uplugged so not sure if that would cause these but all it really did was Bluetooth? E18D has been there for a while but I've never seen E190 before. Not overly worried but there must be some reason the codes have been logged. |
02-05-2017, 09:34 PM | #2 |
Lieutenant General
1911
Rep 13,102
Posts |
Anything unplugged on the Most Loop makes
everything on the Most Loop throw and error code. electical e90 pdf http://www.google.com/url?sa=t&rct=j...,d.cGU&cad=rja http://www.google.com/url?sa=t&rct=j...85464276,d.cGU http://www.google.com/url?sa=t&rct=j...85464276,d.cGU The Ring is the Most Loop Broken by unplugging the Mulf. Read about the Most Bus Loop in the first PDF Buy a most loop jumper or rewire the Most Loop at the Most junction box if it bothers you. |
Appreciate
0
|
04-12-2019, 04:51 AM | #6 |
Private First Class
45
Rep 198
Posts |
shew, my issue is i think when i bought the car they either did a battery check, or the previous mulf was dead.
i replaced the mulf2 unit. and i had an E190 and E18D error. i removed the cables, plugged all back in and was hoping and checked errors. the only error that returned was E18D, but i need to check again. i was hoping to just reset the system, but my ncsexpert isnt working or connecting to the car or i really dont know what the f i am doing. im hoping resetting the entire system might work. |
Appreciate
0
|
Bookmarks |
|
|