N54 N20 tmap sensor mess up

imy · 09-03-2017, 09:32 AM

Hey

So working in the dark to swap my tmap sensor to 3.5bar one, i decided to switch the wires around in the plug rather than buy an adaptor. End result is I damaged the pins that go into the black plug that goes into the tmap sensor.

I am trying to think of a solution fix this... I know the easiest think to do is to find a broken 35i and cut the wires from this but there aren't many about and I need to fix this ASAP.

Another solution I wanted to check is buying the adapter, which I should have bought in first place, and cutting one end of that and soldering it to the oem wires... Anyone know if this will work?

It's a major cock up and I do already feel really bad about this..

Thanks

MMM335 · 09-03-2017, 10:20 AM

just go buy the pins and rewire... dont understand how you could mess up

imy · 09-03-2017, 10:37 AM

... I pushed the pins out of the holder and they got damaged as I said above.

Do you know what the clips are referred to so I can look them up?

MMM335 · 09-03-2017, 10:44 AM

crimp pins go to any electronic sorta store

imy · 09-04-2017, 02:45 AM

Thanks very much

09-03-2017, 09:32 AM	#1
imy Captain 84 Rep 971 Posts Drives: M140i Join Date: Jul 2015 Location: London iTrader: (1)	N54 N20 tmap sensor mess up Hey So working in the dark to swap my tmap sensor to 3.5bar one, i decided to switch the wires around in the plug rather than buy an adaptor. End result is I damaged the pins that go into the black plug that goes into the tmap sensor. I am trying to think of a solution fix this... I know the easiest think to do is to find a broken 35i and cut the wires from this but there aren't many about and I need to fix this ASAP. Another solution I wanted to check is buying the adapter, which I should have bought in first place, and cutting one end of that and soldering it to the oem wires... Anyone know if this will work? It's a major cock up and I do already feel really bad about this.. Thanks __________________ 2016 M140i 07 E90 335i: JB4, Trebila BEF, BMS DCI, VRSF DPs, Scoops, 19" CSL Reps, 5" ETS FMIC, VTT Inlets, BMS CP, HKS BOV, BMS Meth Injection - sold
	Appreciate 0 Tweet Quote

09-03-2017, 10:20 AM	#2
MMM335 Lieutenant 93 Rep 531 Posts Drives: 335i Join Date: Jun 2016 Location: Gold Coast, Australia iTrader: (0)	just go buy the pins and rewire... dont understand how you could mess up __________________ 06' Space Grey 335i FBO MHD Stage 2+ e60 OTS\|VRSF V2 Catless DPs\|VRSF 7 Inch FMIC\|VRSF Charger Pipes\|Turbosmart Supersonic BOV\|K&N DCI's\|VRSF OEM Silicone Inlets\|BMS OCC\|FUEL IT STAGE 2\|07+ TCU Conversion\|XHP Flashtool Stage 3 Race Map\|1m Front Bumper\|CSL Wing\|Aero Rear Bumper\|DTM U Shaped LED Angel Eyes with RGB Demon Eyes\|M3 Cowl
	Appreciate 0 Quote

09-03-2017, 10:37 AM	#3
imy Captain 84 Rep 971 Posts Drives: M140i Join Date: Jul 2015 Location: London iTrader: (1)	... I pushed the pins out of the holder and they got damaged as I said above. Do you know what the clips are referred to so I can look them up?
	Appreciate 0 Quote

09-03-2017, 10:44 AM	#4
MMM335 Lieutenant 93 Rep 531 Posts Drives: 335i Join Date: Jun 2016 Location: Gold Coast, Australia iTrader: (0)	crimp pins go to any electronic sorta store __________________ 06' Space Grey 335i FBO MHD Stage 2+ e60 OTS\|VRSF V2 Catless DPs\|VRSF 7 Inch FMIC\|VRSF Charger Pipes\|Turbosmart Supersonic BOV\|K&N DCI's\|VRSF OEM Silicone Inlets\|BMS OCC\|FUEL IT STAGE 2\|07+ TCU Conversion\|XHP Flashtool Stage 3 Race Map\|1m Front Bumper\|CSL Wing\|Aero Rear Bumper\|DTM U Shaped LED Angel Eyes with RGB Demon Eyes\|M3 Cowl
	Appreciate 0 Quote

09-04-2017, 02:45 AM	#5
imy Captain 84 Rep 971 Posts Drives: M140i Join Date: Jul 2015 Location: London iTrader: (1)	Thanks very much
	Appreciate 0 Quote